If you have a dishwasher, you want to get the most from it, right? Are you asking, how do I get the best results from my dishwasher? There are plenty of ways to go about it, with the common ones as given by dishwasher repair professionals being:

Use hot water

To have an easy time cleaning the dishes, use hot water as it has been shown to clean better. It’s always wise to check the hot water temperature at the kitchen faucet using a candy or meat thermometer. For best results, the temperature should be 120 degrees.

If the water is colder than this, adjust the settings on your water heater.

To ensure you have hot water throughout the dishwasher, run hot water in the kitchen sink before you start your dishwasher. This way, you ensure that, the tub fills with all hot water, which ensures that you thoroughly clean your dishes.

Scrape the food off the dishes

You might have heard that you should remove as much food from the dishes as possible to give your dishwasher an easy time. Removing some of the food from the dishes before washing them is wise, but you should avoid overdoing it.

As a rule of thumb, don’t rinse the dishes as you will not only be wasting water, but also worsening the detergent’s performance.

The right way to go about it is to scrape the large food particles from the dishes and then put the dishes in the dishwasher.

Run a balanced load

You should run a balanced load to prevent your dishwasher from making noises as it’s working. This calls for you to ensure that your dishes are balanced in all areas.

To ensure this happens, follow the recommendations given by your manufacturer on the proper loading of the dishwasher. As a rule of thumb, don’t crowd or overload the dishwasher, as you not only risk your appliance not running smoothly, but also risk blocking the spray arm and preventing the water from reaching all the surfaces.

Use the right cleaning cycle.

Most modern dishwashers come with different cycle settings meant to clean different dishes. These cycles include: regular cycle for normal cleaning, the heavy-duty cycle for deep cleaning, and the light cycle for china and fragile items.

You should use the right cycle to get the most from your dishwasher. If you aren’t sure about the right cycle for your dishes, consult the owner’s manual or an experienced professional.

Go easy on the soap

Using a lot of soap will get you cleaner dishes, right? Well, no. As much as you would want spotless dishes, using too much soap than necessary doesn’t give you the best results.

Besides still having soap on your dishes after running a cycle, using too much soap can ruin your dishwasher.

When choosing a washing cycle, refer to the instruction manual for directions on the best soap to clean the dishes and the right amounts to use.

Keep your machine clean.

Since your washing machine is responsible for cleaning, you don’t need to clean it, right? Well, no. Like other appliances, you need to clean your washing machine.

By doing so, you not only always have clean dishes, but also have a properly functioning dishwasher that is beautiful to look at.

To clean your dishwasher, run the appliance on a normal cycle using two cups of white vinegar. As a rule of thumb, don’t use a detergent to do the cleaning. This way, you remove any materials in the appliance and eliminate awful smells.

If you want to go the extra mile, wipe down the interior walls and racks of the appliance with a solution of vinegar and baking soda. Remember to rinse the surfaces properly after going over them.

Regularly inspect the dishwasher.

The same way you should regularly clean the dishwasher is the same way you should regularly inspect it and fix any issues it might be having. You can do the inspection yourself or hire a dishwasher repair professional to help.

When hiring professionals, ensure they are experienced and know what they are doing. Don’t hire a novice that will be a liability to have.

The post appeared first on Express Appliance Repair