Month: March 2019

Refrigerators had made life so much easier than it was back when they did not exist, and today it is the most essential and used appliance in our life. While everything beneficial comes with its problems, refrigerators have similar difficulties to deal with besides its sound effects.

With a refrigerator not working correctly, it may lead to all the stored food to spoil and waste. Most of the times, to recover from such problems refrigerator repair near me are quite useful.

But if you can deal with them at home and get your problems solved in minutes by yourself, the job gets much more comfortable. So it is always better to be acquainted with some handy skills while dealing with a refrigerator.

Common problems:

1. Continuous water leakage
2. Strange noises from the refrigerator
3. Temperature not cold enough
4. Freezing of food at the bottom part
5. Ice building up inside the fridge

Most of these problems occur due to carelessness while handling the fridge and can be prevented with adequate care. A few tips can always come in handy while repairing your refrigerator at home.

Solving your refrigerator problems:

1. Continuous water leakage:

A refrigerator leaks water when the water supply line freezes and splashes water continuously. It can also leak when the drain hose gets clogged with food particles, vegetable leaves, and other litters and scraps.

The clogged hose leads to a blocked defrost drain eventually causing water dribbling from the drain. In such a case, the problem can be fixed by using a tub of warm water to clear the blocked drain within a few minutes interval.

The hose can be cleared with a bent hanger or anything with a bent end slowly removing the litter with a few attempts.

A defect in the water supply line or a shut-off-valve at its open state can also cause water leakage. To get rid of this problem, the valve behind the panel of the refrigerator should be closed clearing the blockage and checked for any wear and tear. The water supply line should be tested and fixed according to the problem faced.

2. Strange noises from the refrigerator:

The refrigerator makes high pitched noises when the condenser motor fan stops working due to blockage. The fan gets blocked due to litter accumulating in the propeller blades and every time it rotates, the clicking sound produced is due to the litter.

This problem can be solved by unplugging the refrigerator at first and then brushing the blades with warm water and bicarbonate solutions. The freezer may also create sounds when the distance between it and the wall is narrow. This may lead to vibration and can be solved by displacing it from a space an inch away from the wall.

3. Temperature not cold enough:

The condenser fan is clogged with litter also plays a role in inadequate cooling of the refrigerator. If the condenser fan is blocked by debris, the rotation is slow, and enough frosting does not occur.

Clogged coils inside can also add to the raised temperature inside and result in inadequate cooling. To solve this problem, remove the evaporator cabinet and replace the fan. The compressor should start running after the replacement and will start frosting again.

A brush can be used to clean the condenser coils after unplugging the refrigerator from the source. The thermostat readings should be checked if the problem lies underneath it as well.

4. Freezing of food at the bottom part:

The bottom portion is not designed to be frosted at a freezing point in a refrigerator. So freezing of food at the bottom part is counted as an abnormal phenomenon. This can happen due to a wide range of reasons.

Firstly, the food may be insufficient compared to the surface area required to be occupied and the air to reach the food. Due to inadequate food compared to the amount of air inside, the food tends to freeze.

The food can also freeze inside if the temperature regulating points are not set correctly. Too much low-temperature setting points can cause food to freeze inside the bottom part.

The problem can be solved by setting the regulatory points to an optimum temperature, storing ample food compared to the surface area, avoiding the bottom part for negligible food, etc.

5. Ice building up inside the refrigerator:

A sudden frost inside the freezing compartment of the fridge is a matter of concern and needs attention to be solved as soon as possible. Inaccurate sealing of the fridge, and keeping the door open for too long add to the problem of ice building up inside the chambers.

Loose door pivots and careless closure of doors let the external air accumulate inside and cause the building of excessive ice. Defective door seals also let air pass through and cause building up of ice.

Ice buildup can lead to clogging inside the chambers and imbalance in humidity to be maintained inside. The proper preventive measure is to always tighten the door seals and check for proper closures.

It can be solved by unclogging the apertures, unplugging the refrigerator and introducing warm water to get rid of the excess buildup of ice pouring out.

Attention should be given so that distance is maintained between the wall and the fridge so that it gets enough space to release the excess air. Plug the refrigerator again and check the compressor to ensure proper cooling after the changes.

Conclusion:

Wrapping it up, it can be concluded that a refrigerator may face a wide range of problems if used incorrectly and carelessly. Inadequate cooling or frosting is always a matter of concern in this kind of appliance and can lead to severe damage to it.
Proper measures and useful tips should always be followed to take care of your refrigerator by yourself. Tricky tips can work smoothly and help you benefit from them without the help of repairing services and technicians. Thus, following some do’s and don’ts can help you fix your refrigerator in a short period effectively.

Note: Image Source  cnet.com/reviews/lg-lsxc22436s-side-by-side-counter-depth-refrigerator-review/

The post Top 5 Refrigerator Problems and Solutions appeared first on Appliance Masters Repair Service.

Dryers are one of the most essential and necessary appliances in the present everyday life because they are super useful in saving our time and doing a part of our daily chores, saving us in emergencies and saving our tireless efforts.

Not only are they useful in providing us with adequate scope to get our clothes dry in a limited period and a fast rate, but they also make our lives easier by doing their functions in times of necessity.

Although they are effective, they exhibit some difficult problems have created a nuisance. A few tips can always help solve these difficulties.

Problems commonly faced:

1. The dryer fails to start
2. The dryer makes strange sounds
3. The dryer does not heat
4. The dryer gets slow
5. The dryer gets too hot

Although the problems sound difficult and are incredibly annoying, they can be handled pretty quickly if the correct techniques are followed. Dryer repair near me are quite handy and available almost everywhere nowadays, but it always feels better to solve such problems at home yourself.

How to solve dryer problems:

1.The dryer fails to start

This is the most common problem faced while handling a dryer. No matter how many times you try to start it and push the switch again and again, the dryer fails to start. In such cases, always check the control settings and make sure everything is in the proper place.

If that is not the case, the problem might lie in your electricity connection. Ensure if the electricity is reaching your appliance and if the link is adequate.In most cases, a circuit breaker seems to slip, and the dryer fails to activate, and the problems can be solved by resetting the circuit breaker. If it persists, there might be an issue related to the circuit outlet which might need the help of the electrician.

The problems might also be related to the door switch and thermostats and will eventually require replacement with screwdrivers and pliers if you are comfortable dealing with them.

Most of the reasons the dryer fails to start lies within the electricity issues or mishandling through pressing the wrong system buttons and can be solved with proper handling.

2. The dryer makes strange sounds:

Often dryers are observed to make high pitched noises, and squeaking sounds without any reason while operating them which is scary at most times out of a sudden.

These noises indicate signs of abrasion and need immediate attention. Dryers contain a belt around the drum, and these belts may undergo loosening or scraping off and lead to abnormal sounds out of the dryer.

This can be solved by opening the cabinet and pulling the worn out belt off and replacing them with a new one. The sounds may also result from drum supports of the dryer called glides which seem to wear out evenly and cause friction with the inner wall and cause shrill sounds.

It should be replaced as soon as possible before damage may occur to the interior of the dryer. Anything metallic getting trapped inside the dryer may also result in jammed noises and can be a source of a nuisance so it must be brought into attention as soon as possible.

3. The dryer does not heat:

A dryer may fail to heat because it might get blocked due to impaired airflow inside, it might get clogged in the filter, and it might face a problem of the safety devices to function correctly.

Most of the time the dryer does not receive adequate air flow due to a blocked aperture and air cannot enter in sufficient amount leading to heat failure. In other cases, a clogged filter or non-functioning burner flame can cause the dryer to fail to heat.

In such cases, the problem can be solved by replacing the gas burner, cleaning the filter properly and clearing the aperture well. Defective electric coils and false readings in the thermostat indicate the heating ability of the dryer to be diminished.

These problems can be solved by checking the readings of the thermostat behind the dryer whether it is at zero or not.

If it is at zero, replace the thermostat by pressing the probes, and it will solve the problem. Removing the defective coils and replacing them is also an easy task and can be done manually.

4. The dryer gets slow:

A dryer may indicate slow functioning when it takes time longer than usual to dry clothes. A clogged filter and blocked aperture can lead to this problem when the dryer has not been adequately cleaned in a long time.

The best way to deal with this is to clean the filter once a month or within a few weeks to get it going smoothly.

Adequate air flow should be allowed to pass through the aperture to let the dryer to run at its optimum speed. The slow pace of the dryer can result in inadequate heating of the clothes, and the garments may appear wrinkled as well.

5. The dryer gets too hot:

A dryer may get hot when the internal conditions are extremely unfavorable, and the consequences can be pretty damaging if proper precautions are not taken and attention is not given. Accidents may also occur due to mishandling of the dryer during such times.

A dryer may get hot due to the accumulation of excess lint inside the aperture and cause humidity to be trapped inside. Excess heat can build up inside due to impaired thermostat operation and defects in the gas burner flame.

Poisonous carbon monoxide can also get accumulated inside during such conditions and cause overheating. To prevent such problems, the first and foremost priority should be to turn the switch off and let the dryer cool down first to avoid any accidents.

After the dryer has cooled down, carefully remove the filter and clean the lint trapped inside. The thermostat should be replaced if worn out, and the burner flame should be checked.

Final Verdict

Summing it up, it can be said that a dryer faces some difficulties due to irregular cleaning up and impaired functioning of the parts. Such problems may lead to hampering of the regular activities while using a dryer. In such a case, ample skills can help in the long run and solve the problems.

The post Top 5 Dryer Problems and Solutions appeared first on Appliance Masters Repair Service.