For you to properly clean the dishes, you have to load them properly in the dishwasher. Here are tips on how to go about it as given by dishwasher repair professionals:

Loading the top rack

The top rack is designed for glasses, cups, saucers, and smaller items. Place the items at an angle with the dirtiest surface facing downward. To prevent the dishes from chipping or getting damaged, ensure similar items don’t touch.

Place lightweight and dishwasher-safe plastic items such as storage containers on the top rack. If including any household items you can clean in the dishwasher, keep them on the top rack. Place them away from high temperatures of the drying element in the bottom of the appliance.

Ensure the plastic items you place in the dishwasher rack aren’t too small to fit through gaps. This is because items that can fall through the gaps can block one of the washer arms or land on the dishwasher’s heating element and get burnt.

Does your appliance have a fold-down shelf with stemware holders? Secure the stems of wine glasses and champagne flutes in the holders for extra protection during washing.

Some dishwasher models have flexible spray nozzles on the upper rack where you can place tall glasses and water bottles.

Got long utensils such as ladles and spatulas? Lay them flat on the upper dishwasher rack. Ensure the utensils can slip through the rack and block the spray arms.

Loading the bottom rack

The bottom rack is the ideal spot for plates, pans, bakeware, instant pot inner pots, and casserole dishes. Place dinner and lunch plates between the tines on the bottom rack and angle the dirty sides towards the washer jets.

Watch you don’t stack the dishes on top of each other as this will cause nesting and prevent the dishes from getting clean evenly. You can avoid nesting by alternating larger and smaller plates.

Position large bowls between tines or along the side, back, or front of the bottom rack. Face the inside of each bowl towards the center of the dishwasher and angle them downwards.

If you have larger cookware items such as pans, pots, and baking dishes, place them along the sides or back of the lower rack. Angle them down to ensure better cleaning and drainage.

Place flat pans and platters on the side or back of the lower rack away from the dishwasher door. Avoid placing them in the front door as you can block detergents from reaching the dishes.

Loading the silverware

The key to ensuring the silverware get clean is to ensure the water reaches the entire surface area. Don’t place forks or spoons in one section unless you alternate the direction. Load the silverware into the silverware basket while taking care to avoid nesting when loading, as this can cause some of the utensils to clean inefficiently.

To protect your fingers and hands when loading, place knives with the handles facing up. For the spoons and forks, place them with the handles facing down.

If your silverware baskets have lids, take care as they might flip up if the handles don’t fit into the slots in the lids.

Once everything is in place, fill the detergent dispense to the necessary level based on how hard the water is in your area.

Tips for getting excellent results from your dishwasher

For clean dishes all the time, clean the dishwasher regularly.

Use the correct amount of dishwasher detergent. As mentioned above, this will depend on how hard the water is. If the water contains a lot of minerals, use more detergent for every load.

Ensure that the detergent is fresh and not clumping. Give the liquids a good shake before you use them. This will break any lumps in powdered formulas leaving you with easy to use detergent.

Watch what you place in the dishwasher. Some items, such as cast iron and ceramic-coated cookware, should never see the insides of the dishwasher. This is because they will get damaged, and you can’t restore them.

At least once a year, hire an appliance repair Springfield professional to inspect your appliance and ensure all the parts are functioning optimally. If they have a problem, the professional should fix it immediately before it gets worse.

The post appeared first on Express Appliance Repair

The fact of the matter is that trash
compactors are actually very simple appliances. As a result,
there is not a lot that can go wrong with them – but sometimes
things do go wrong. At American Appliance Repair we have been providing appliance
solutions for more than 30 years and have found that most trash
compactor issues are one of the three things.

Keep reading and find out what those three problems are and what you can do about it. If you need or want professional appliance service, contact American Appliance Repair at 800-640-9934 for help.

1. Your Trash Compactor Will Not Turn On

If this is the issue, we recommend first checking the power cord. Then check to make sure that the electrical supply is working. You can do this by checking to see if you have tripped a circuit breaker, or you can unplug your trash compactor and plug in something else. If that item works fine, then you know the issue is with the trash compactor and not with the electric supply. Another common cause of it not coming on at all is an issue with the drawer latch. This latch is designed to prevent the power from turning on if it the trash compactor is not fully turned off. Make sure your latch is entirely closed and try to run it again.

2. Your Trash Compactor Is Not Smashing Trash

The most common reason that your trash compactor may not be smashing as well as it once did has to do with the drive belt. If it is old and worn out, then it may need to be tightened or replaced entirely. Second, it could be an issue with the motor, which can also. These are both issues that should be handled by the professionals.

3. The Door or Drawer of Your Trash Compactor Will Not Open

There are a number of factors that could be causing this issue. It could be that something that is moving the drawer along is dirt or damaged. This potentially includes tracks, wheels, guides, and rollers. We can take a look and determine if they need to be replaced or if a deep cleaning will be enough.

We Can Provide a Comprehensive Troubleshooting
Appointment

You do not want to invest in upgrades
or repairs until you are sure you have found the problem. You can
contact American Appliance Repair today at 800-640-9934 to find out how we can help you
troubleshoot the issue and find the right solution. Call us now and
we can get to work right away.

The post Get Answers to Three of the Most Common Issues with Trash Compactors appeared first on American Appliance Repair.

Your washing machine is supposed to
clean your clothes and leave them smelling lovely and fresh. What
happens when the opposite occurs due to your washing machine smelling
bad itself? This is actually a more common issue than you might
guess. You can always contact American Appliance Repair at 800-640-9934 for washing
machine repair or follow these steps to get rid of the smell.

Understanding Why There is a Smell in the First
Place

You may wonder: Why does my washing
machine have this smell? The truth is that though the drain gets rid
of most of the hair, dirt, soapsuds, and grime, some will remain
behind. If you use too much detergent when you wash then you can
actually end up with a dirtier washing machine because of the excess
suds.

Once you are done with a load and close
the door, remember that your washer is inherently warm and moist,
which is the perfect environment for mold and mildew to develop. This
can cause a smell that gest worse over time. There could be mold and
mildew within the filter, walls, and gasket of your front loading
washing machine.

Start by Running the Self-Clean Cycle

If you notice a moldy smell, simply
cleaning out the interior of the washtub could be enough to get rid
of that smell. Luckily most Samsung front loading machines come with
a self-clean cycle that may fix the issue for you.

Before you start it, make sure that the
tub is entirely empty and dry. Fill up the detergent compartment with
bleach, close the door, and select the self-clean option. Press start
and wait for the one to four hours the cycle will take to complete.
Then wipe down the tub to get rid of any residue. Then leave the door
open so that it can fully air dry.

Clean the Washer Pump Filter

Your washer has a
pump filter that is supposed to screen out debris to assure that it
does not clog up the drain. If it smells bad, cleaning out this
filter can help. There is a cover on the bottom of your washer. It
should be on the right side in the front of your washer. Press that
cover and it will open. Put down a towel and something to catch drips
from the house.

Then take off the drain hose camp and
let water drain out of it. Take out the pump filter by twisting it
and use a toothbrush to scrub away any debris that is stuck on it.
Then put the filter back in, put the drain hose cap back on, and
close up the access panel.

Remember that you can always call American Appliance Repair for service and we also sell appliance parts if you’d prefer to do the job yourself.

The post Learn How to Get Rid of Bad Smells in Samsung Front Loading Washing Machines appeared first on American Appliance Repair.

Compared to other types
of appliances, dishwashers can actually require more maintenance.
However, if you follow dishwasher
usage tips and cleaning, your dishwasher can run at its peak
level. Keep reading to learn more or contact American Appliance Repair at 800-640-9934 to
let the professionals handle it for you.

Use the Right Dishwashing Detergent

It is key to make sure you are using
the right detergent. However, there is not one detergent that works
best for everyone. You can first start with either powder, liquid,
tablets, or pods, depending on your preference. Other type of soaps
cause too many suds and can leave behind a residue. If you are not
sure what is best for your machine, check your manufacturer’s
instructions or ask when you call American Appliance Repair for maintenance help.

Use a Rinse Aid

When you need a deep clean, try a rinse
aid agent. These products help rinse out the dishwasher so that it
can perform its best. If you have spots that form on your dishes,
these are generally happening during the rinsing cycle when the
detergent is gone. Adding a rinse agent can help the water drip off
entirely during the dry cycle – which means an end to spots and
stains on your dishes.

Use a Dishwasher Cleaner Every Few Months

You can run a dishwasher cleaner
through your washer once every two to three months. This can get rid
of any mold, mildew, or bacterial growth, along with other types of
residues. If you have noticed that your dishwasher smells bad, or
that it often has clogs, then this could make a big impact.

Avoid Pre-Rinsing

As dishwashers
begin to work at lower and lower capacities, it is natural for a
homeowner types even more. They assume that since the dishwasher is
not working well that it cannot handle the added residue on plates
and bowls. The truth is that while you do want to scrape off excess
food from your dishes, you do not want to rinse them. Believe it or
not, dishwasher detergent actually works its best when there is
something for it to interact with.

Make Sure You Are Loading the Dishwasher
Correctly

We know – this is a topic that many
people cannot agree on. We are not going to debate which way the
forks and knives should sit, or which way the plates should face.
However, we will tell you a few uncontroversial facts: Put larger
dishes on the bottom rack with larger items on the top rack. Make
sure that you have enough space between your dishes so that the
entire surface can be cleaned.

If you are having issues with your
dishwasher, contact American Appliance Repair at 800-640-9934 to get started.

The post Learn How to Get Your Dishwasher Performing at Optimal Levels appeared first on American Appliance Repair.

If you have a faulty refrigerator, you must be wondering, can a fridge be repaired? If you are one of the people asking this question, appliance repair professionals report that yes, you can repair a refrigerator.

While this is the case, you shouldn’t just go ahead and hire a repairman as you might be wasting your money. Before you do it, you should consider plenty of factors that include:

Factors to consider before hiring a repair professional

Age of the fridge: If you have had your refrigerator for more than a decade, you will be wasting money as it will be too expensive to repair it. This is because old appliances keep on failing, and you have to keep on fixing it. A never-ending money pit, you might say.

Spares for old appliances are also difficult to locate, not to mention the cost of maintaining the appliance. If your appliance is old, you should simply replace it.

Cost of repair: The other factor you should pay attention to is the cost of hiring the repair professional. If your fridge is not from a popular brand or is inbuilt, it will be expensive to repair compared to one from a popular brand.

Before you ask a repair technician to repair the appliance, first compare the price of fixing it and that of getting a new one.

Energy efficiency: How efficient is the appliance you are looking to repair? If you have had it for a long time, the chances are that it’s old and inefficient. Therefore, it’s contributing significantly to your home’s energy bill.

If you can improve the efficiency of the appliance, well and good, but if you can’t, you are better off simply replacing it.

What if you don’t have money to hire an AC repair professional?

If you don’t have the money to hire a repair technician, try fixing it by yourself. Some of the problems that you can easily fix include:

Failure of the freezer to switch on: The fridge will fail to turn on if you haven’t used it for a long time. When this happens, the first thing to check is the power. Is it on? Is the appliance properly connected to the socket?

Properly functioning freezers should be properly connected directly to the socket. If an extension lead connects your appliance, it could provoke a problem.

Failure of the internal freezer light to come on: The light inside the fridge can stop working due to many reasons: the light bulb might be blown, the lamp may have gotten loose, among many other issues. You need to find out why the light isn’t working and fix it.

Failure of the fridge door to close properly: In most cases, the fridge will fail to close properly if it’s not level on the ground. Here you simply need to level the fridge.

The door will also fail to close correctly if you have placed too much weight on the door shelves.

Check the condition of the fridge and fix it appropriately. While at it, also check the door seals for wear and tear and replace them if necessary.

Taking care of the refrigerator

To avoid having to repair the appliance, you should take good care of it. Some of the things you should do include:

Defrost the freezer regularly: Defrosting gets rid of excess ice. Before you defrost it, remove any foods that might be there. You should then unplug it from the power source and let the ice melt away. To speed up the ice melting, use a blow dryer or place a bowl of steaming water in the unit.

Clean the fridge: Another thing you should do is to clean the appliance regularly. Most people pay attention only to the exterior, but you should also pay attention to the interior too. At least once a week, remove all the food material and using warm soapy water, wipe all the interior surfaces.

To avoid damaging the surfaces, refrigerator repair Alexandria professionals advise against using harsh chemicals such as bleach. Stick with dishwashing liquid and natural cleaners.

Maintain the right temperature: Finally, you should maintain your refrigerator at the right temperature. As a rule of thumb, ensure that the freezer is -18° Celsius. To avoid damage, regularly check the temperature and be alert for any spoilt food.

The post appeared first on Express Appliance Repair

For your expensive washing machine to last longer and function optimally, you need to take good care of it. According to appliance repair professionals, you should have a daily, weekly, and monthly washing machine maintenance routine for you to keep the appliance in top shape the entire year-round:

Daily cleaning of the washing machine

Once you are done using the machine, take some time to wipe the drum. This comes in handy at preventing the machine from getting smelly. You also should check the detergent compartment and confirm whether there are still any detergent residues left.

If there are any left, wipe them away with a clean dish rag. By so doing, you prevent mold from building up once you maintain a clean appliance all the time. If you want to have an ultra-clean appliance, consider cleaning it with a hose.

Once the clothes are clean, immediately remove them from the washing machine and transfer them to the dryer or hang them on the clothing line to dry. You shouldn’t leave them in the washing machine as they will get moldy and musty.

When you aren’t cleaning, leave the washing machine door open. This will allow the air to circulate inside the machine reducing the chances of mold or awful smells developing.

Weekly washing machine maintenance

At least once a week, inspect the washing machine for signs of leakages. Ensure that the rubber seal of the washing machine hose is still working perfectly at sealing the connection of the hose and the water source.

If you notice the connection beginning to deteriorate, consider replacing it.

Pay attention to the detergent compartment water slots. These are the slots where the water comes out. Ensure that there are no hard minerals or residues left that might clog the slots. Pay close attention to them and clean them if necessary.

Monthly washing machine maintenance tips

Here you should pay attention to the belt of the washing machine. Pay attention to any signs of wear and tear. If the machine is wearing out faster than it should, the chances are that you are using the wrong laundry cycle.

Take time to go back to the manual and confirm the cycle you should be using. You also should use the washing machine wisely by avoiding running small laundry cycles.

Are there worn out or damaged parts that should be replaced? Whether they are belts or bearings, replace them if they need to. While at it, tighten up some screws or parts that might have gotten loose.

If you live in a hard water region, limescale can build up, leading to plenty of problems such as limescale building up on the heating element resulting in the component being less effective.

To prevent this, you should descale the washing machine at least once a month. If the water in your area isn’t hard, you should still descale your appliance, but you should do it every three to six months.

Proper washing machine use

How you use the machine goes a long way towards keeping it in top shape. One of the things you shouldn’t do is to overload the machine. When you overload the machine, you throw the machine off balance while leads to plenty of problems.

If you are new to using the machine, consult the owner’s manual for instructions on the proper loading sizes.

Keep the machine level: Washing machines always vibrate when working, and when they aren’t level with all the four legs, they rock back and forth and even vibrate strongly than they should.

To prevent this, ensure that the machine is level at all times. You also should keep it as close to the floor as possible to reduce the vibration.

Use the right amount of detergent: Most people pay attention to the information given on the packaging, but you shouldn’t. The best way out is to follow the owner’s manual and follow the instructions given by the washing machine manufacturer.

According to commercial appliance repair Springfield, when you do this way, you don’t use more detergent than you should hence putting your appliance at the risk of clogging up.

The post appeared first on Express Appliance Repair

It is unlikely that even if it were in
perfect condition, your refrigerator would be silent. However, there
are many sounds that can indicate an issue with your fridge. Keep
reading to learn about potential reasons and then contact American Appliance Repair
at 800-640-9934 if you are in need of refrigerator
repair or maintenance.

Grinding and/or Clattering is Often an Issue with
Your Ice Maker

One of the most common things that
people worry about is a sound of grinding or clattering. This
generally comes out of the ice maker. The fact is simple: Ice cubes
can be noisy, especially when they are falling into a cold, hollow,
plastic tray. The machinery that actually makes the ice also moves,
which can cause additional noise.

If the grinding and/or clattering is occasional, then it is likely just your ice maker making ice. If it is louder, the sound is jagged, or it has started when it used to be silent, then it may be time to take out your ice maker and clean it. If that and a defrost cycle doesn’t fix the issue, contact American Appliance Repair at 800-640-9934 for help.

A Broken Fan Can Cause Rattling and Clacking

If you hear a rattle, whether it is
constant or comes and goes, this could be an issue with your fan that
has broken or become loose on its motor shaft. The job of the fan is
to keep the temperature even within your refrigerator by moving cold
air around. If it is an issue with the fan, you will also likely
notice that the air is not flowing well, there is frost built up, and
other signs. This is a situation that warrants a call to your local
appliance repair
company.

A Worn Out Motor or Condenser May Make Whining or
Whirring Sounds

It is often the case that a whine or
high-pitched sound from a refrigerator is caused by a malfunction
with the motor or electricity. A motor is likely to whine when it is
not in alignment and when it is grinding against something that
causes resistance. If too much power goes through a low-power
circuit, electricity can make a whining sound.

This is another issue that requires the help of professionals. It may be that a deep cleaning can fix it but in most cases, it will be time to replace apart. The good news is that at American Appliance Repair, we have access to high-quality parts and provide expert installation. Call us now at 800-640-9934 and we can get started.

The post Troubleshooting Refrigerator Sounds: Learn Potential Causes of Sounds Made by Your Refrigerator appeared first on American Appliance Repair.