Call 877-959-3534 for an Appliance Repair Quote!

For your oven to function optimally and avoid having to hire oven repair professionals now and then, you should properly maintain your unit. How do you go about it?

Deep clean your appliance at least twice a year.

Of course, you should clean your appliance when you are done cooking at the end of the day, but this isn’t enough—you still need to clean your appliance thoroughly.

When cleaning, ensure that the unit has thoroughly cooled down. If cleaning it by hand using a wet piece of cloth, unplug it from the power to protect yourself from getting electrocuted. You will even be safer if you switch off the circuit breaker’s power.

Many people remove the knobs from their appliances so that they can properly clean them, but you shouldn’t do this. This is because the chemicals you use when cleaning can get behind the knobs and damage the wiring. You don’t want this to happen to your appliance, do you?

Use a wet cloth with a gentle store-bought vinegar or baking soda solution for the best results. You should wipe the solutions down the insides of the stove, then let the hard-to-clean areas soak before you scrub using a towel.

Call 877-959-3534 for an Appliance Repair Quote!

Always let the oven dry before you use it.

To have an easier time doing the annual cleanings, make it a habit to wipe down the stove and burners at least once a week or after every messy meal. You should never leave a thick food residue on the bottom of the oven as it can smoke or even cause a fire.

Regularly inspect the oven gasket.

Before you do the cleaning, check the rubber gasket around the insides of the oven door for tears, holes, or general wear. If the strip has any issues, replace it before you use the oven again.

When buying the gasket, don’t buy just any other—buy a high-quality one that will withstand the test of time.

Be cautious when using the self-cleaning feature.

Most ovens have a self-cleaning feature that sends the temperatures soaring to 500 degrees or even more to break up difficult debris.

Oven manufacturers recommend you use this feature when you have had messy baking, for example, when you have had a catastrophic lasagna overflow. It’s also recommended that you use this feature when your oven hasn’t received any attention in a long time.

While this feature is great and makes removing even the most problematic debris easy, you should use it sparingly to avoid damaging your oven. This means you shouldn’t use it every time your oven gets dirty—reserve it only for the necessary times.

Even when using the feature, ensure that you follow the instructions in the owner’s manual. As you are cleaning, never leave the oven unattended, as the high temperatures can easily get out of control, and when no one is attending to the stove, it can be catastrophic.

Replace the broken parts

If you regularly use your oven, some parts are bound to break. The most common parts that do are the burners. Most homeowners ignore them when they do, but you shouldn’t.

When you spot a deep red spot on the coil when baking, don’t ignore it, as it’s a matter of time before it goes off. Instead, you should turn off the oven and contact a repair professional to replace it.

Like the other parts, replace the burners with high-quality ones that will last a long time. Don’t cheap out on them, as the costs of replacing them can quickly add up.

Call 877-959-3534 for an Appliance Repair Quote!

Avoid messy dishes

To avoid having to clean and scrub the oven, avoid cooking messy dishes. When you do, place the recipes, such as pies and casseroles, on top of the baking sheet, preventing overflowing food from dripping down and staining the appliance.

As you are using the sheets, appliance repair  advice you take care not to place them on the vents as this can prevent the heat from blowing. There is also the risk of the burners getting damaged.

The post Guide to Maintaining Your Oven first appeared on HVAC Repair, appliance repair. The post appeared first on Express Appliance Repair

Call 877-959-3534 for an Appliance Repair Quote!

How you handle your washing machine comes in handy in determining its durability and effectiveness. Have you just started using the machine? Here are a few dos and don’ts you should be aware of as given by washer repair professionals:

Do ensure the washing machine is level

One of the important things you need to do is to ensure that the machine is installed correctly. This calls for you to ensure that the machine is on level ground. Remember that if your machine isn’t balanced, it will regularly develop problems with the spin cycle.

You will also have problems if the machine isn’t correctly installed. For example, if your machine is poorly installed and the waste hose is too high or too low, it won’t function as well as it should.

When the machine is improperly installed, you have a problem maintaining pressure in the pipes. When the pressure is too low, there is the risk of flooding, which can turn the machine off. The pump might not get strong enough to push the water out when the pressure is too high.

For your unit to function correctly, you need to install it properly. Thankfully, most machines come with instruction manuals that guide you on how to install the machine properly. Follow the manual and install the machine, but if you have a problem doing it, let a professional help you.

Call 877-959-3534 for an Appliance Repair Quote!

Do consider the capacity of the machine.

When loading the machine, pay close attention to the machine’s capacity. As a rule of thumb, don’t simply stuff the drum, as this puts too much pressure on the bearings, suspension, motor, and other parts of the unit, triggering the unit to wear out.

Overloading the machine also reduces the quality of the wash.

To stay safe, pay attention to your machine’s maximum capacity and do not overstuff it.

If you have a top loader, ensure that you balance your load. This is because having the weight on one side increases the chances of the machine getting damaged as it spins.

If the situation doesn’t allow it and you have to run an unbalanced load, take care and reduce the spin speed to reduce the chances of breakages.

Do empty your pockets and clean the filters.

Emptying the pockets before putting the clothes in the washing machine might sound obvious, but you will be shocked by the number of people that forget to do it.

Besides coins and other metals getting into the drum and damaging it, there is the risk of different types of debris, such as papers and cloth fibers, getting into the pipework and damaging the various components.

To ensure this doesn’t happen, always empty your pockets before you place the clothes in the washing machine.

If you regularly forget to empty your pockets, remember to clean the filters. Thankfully, most washers come with well-detailed manuals. You should read the manual and find a way to access the filters and clean them properly.

Call 877-959-3534 for an Appliance Repair Quote!

Don’t use too much detergent.

You might argue that using more than usual detergent will get your clothes cleaner, but this isn’t the case. It has been shown that using too much detergent than usual leaves residues on your clothing; hence you don’t have clean clothes at the end of the cycle.

To easily keep your clothes clean, use the right amount of detergent. If you aren’t sure about the right one to go for, get a guide from the manual.

Don’t leave wet clothes in the washing machine for a long time

Some people wash their clothes and then forget them in the washing machine. This is wrong as the moisture from the wet clothes leads to a buildup of mold in your washing machine’s drum and even sometimes on your clothes.

When washing your clothes, it’s good that you concentrate on them. This calls for you to focus on cleaning the clothes and only get to other activities once you are done.

When you finish washing the clothes, appliance repair professionals recommend you remove the clothes from the washer as soon as possible after you complete the rinse cycle. You should then leave the clothes to dry outside naturally.

Call 877-959-3534 for an Appliance Repair Quote!

The post appeared first on Express Appliance Repair

Call 877-959-3534 for an Appliance Repair Quote!

As a responsible homeowner, would you not want your fridge consuming too much energy? Thankfully, there are plenty of ways to ensure that your appliance runs as efficiently as possible and you spend as little as possible on your energy bill. Which are these strategies? Here they are as given by refrigerator repair professionals:

Cool food first

You must have visited someone or been tempted to put hot food in your fridge. As much as this might sound sensible, it isn’t. In fact, you should avoid it at all costs.

The reason for this is that when you put hot food in the fridge, you abruptly change the temperatures in the appliance, which triggers the refrigerator to start running to compensate for the changes.

As you can guess, when your fridge runs, it consumes the energy you want to save.

To conserve energy, avoid putting hot food in the fridge and instead only put it there once it’s completely cold.

Even if you are in a hurry, let the food cool before you place it in the fridge. In fact, it would be better to leave the food on the shelve for a few hours as you rush to work, then come back and put it in the fridge once it has fully cooled down.

Call 877-959-3534 for an Appliance Repair Quote!

Minimize the frequency you open the fridge door.

Most people will open the fridge door and decide what they want to pick. This results in them holding the door open for far too long it should.

Remember that the purpose of the fridge is to maintain a constant low temperature inside the appliance. This means that when you open the door and leave it open for a long, the cold air leaves, and the fridge has to kick in to fill in the lost air.

As you can tell, this leads to an increase in energy consumption, which increases your energy bill.

To save money, minimize the time you have your fridge door open. A great way to do this is to always know what you want from the fridge by the time you get there. Don’t open the door, start debating what you wish to do, as you will be wasting precious energy.

Another way to minimize the door opening frequency is to get all the things you need at once. This way, you won’t keep going to the fridge.

Adjust your thermometer

Some people think they should set their appliances at the lowest temperatures to keep their food fresh and frozen, but this has been proven not to be the case.

Your fridge will function just as well when you set it at 4 degrees and your freezer at -18 degrees. Most modern appliances have exact temperature readings, but if yours doesn’t, set the temperature dial to the midpoint.

This way, the fridge doesn’t have to work too hard to keep the temperature too low. The refrigerator won’t get triggered to start working every time you open the door, as the temperature doesn’t have to be too low.

Keep your fridge some room.

For your appliance to cool the food, it relies on airflow; when there is inadequate airflow, the fridge doesn’t function as well as it should.

This is because it tends to overwork, leading to high-energy consumption.

Be cautious of where you place your appliance to prevent this from happening. As a rule of thumb, avoid keeping it in a highly congested room, as this will impede proper airflow.

You also should avoid keeping it close to heaters, cooking stoves, and other heat-producing appliances, as this will lead to an overworking appliance you are trying to avoid.

If your kitchen is small, ensure that there aren’t any unnecessary items around. You also should keep the windows open as often as possible so that there is plenty of air getting in.

Parting shot

These are some things you should do to keep your fridge functioning efficiently. Besides these, also make it a habit to hire appliance repair professionals to inspect the appliance at least once a year and fix any issues present.

Call 877-959-3534 for an Appliance Repair Quote!

The post appeared first on Express Appliance Repair