Call 877-959-3534 for an Appliance Repair Quote!

When you are going on a holiday, or you will be out of the house for extended periods, you might have been tempted to leave the dishwasher open for moisture to evaporate and air to flow through the insides of the unit, but you aren’t sure whether this is a great decision.

Should you let the dishwasher air out? If you are wondering about this, you should know that it’s okay to do it. According to appliance repair professionals, airing out your dishwasher comes with plenty of benefits that include:

You allow heat and moisture to escape

Heat and moisture are usually a nightmare combination for most homeowners as they create unhealthy living conditions. When you let your unit air out, you get rid of this moisture, which leaves your unit in top working condition.

Besides leaving the door open when you are leaving the house for extended periods, it’s also recommended that you leave it open regularly to ensure that the dishes are fully dry before you remove them.

A good rule of thumb is to leave the door ajar for at least 30 minutes after each cycle.

You get rid of limescale.

Limescale is the yacky white coating you see on units exposed to water for some time.

The coating results from excess calcium in the water, and while it’s not a hazard to your health, it can lead to many problems for your appliance, such as blocking the unit and restricting water flow.

As you can tell, when your appliance has excessive limescale depositions, it doesn’t run as well as it should.

When you air out the unit, you slow down or prevent the depositions from coming about as you eliminate most of the moisture.

Besides airing out your unit, it’s also highly recommended that you regularly clean the insides of your dishwasher.

Call 877-959-3534 for an Appliance Repair Quote!

You get rid of harmful bacteria.

Bacteria thrive in wet environments, and when your appliance has plenty of moisture in it, it’s bound to promote the growth of these bacteria.

When you air out your appliance, you keep the insides dry, which is handy in keeping the bacteria to a minimum.

Like when keeping the limescale at bay, you also need to regularly clean your appliance to prevent the bacteria from multiplying. When cleaning, pay close attention to the rubber seals, as this is where most bacteria love hanging out the most.

You get rid of standing water.

Even when your dishwasher is running at optimum levels, some water remains behind, which serves as a breeding ground for mosquitoes and other insects.

When you leave the door ajar, you allow this water to evaporate, which leaves your unit dry and free from insect infestation.

You prevent mold growth.

The last thing you want is mold growing, where you clean the plates and forks you eat with.

Unfortunately, the moist and hot nature of the dishwasher makes it an excellent environment for mold to grow in. When mold grows in your unit, you have heightened incidences of asthma, allergies, and other complicated health issues.

When you air out your appliance, you make the insides of the dishwasher dry, which as you can guess, isn’t a great growing ground for mold.

Leaving the dishwasher door open also means that the dishwasher isn’t too hot on the inside, which impedes mold growth.

Remember to regularly clean the insides of the unit to keep the mold off.

Other dishwasher best practices

Besides airing out the dishwasher after a cycle or when you aren’t using it, also make it a habit to clean it regularly.

In most cases, cleaning the dishwasher involves running an empty cycle with hot water that eliminates most bacteria that can wreck havoc.

Dishwasher repair professionals also recommend that you move with haste and fix even the most minor issues as soon as it comes about. This prevents the problems from getting too big and complicated to fix.

Call 877-959-3534 for an Appliance Repair Quote!

The post appeared first on Express Appliance Repair

Call 877-959-3534 for an Appliance Repair Quote!

Would you love to run your dishwasher at top performance? Here are tips that will guide you as given by dishwasher repair professionals:

Load your dishwasher upside down

This might sound obvious, but it’s not. Even when you have been using your dishwasher for a long time, you must have found yourself tossing cups and bowls right side up on more than one occasion, right?

You should always load everything upside down for your dishes to be clean. This way, the water gets into the insides of your glasses and bowls, removing any pieces of gunk sticking around, and as a consequence, you have sparkling clean dishes.

You should always remember to load all of your dishes upside down. The only things that are an exception are spoons and forks.

Place the bowls on the bottom rack, facing the center

Besides being cautious of the direction you place the bowls facing, you should also be cautious of the position you place them in.

You might have the impression that it doesn’t matter where you place your dishes as the water will reach them, but you should be cautious where you place them as placing them anyhow can easily lead to them missing the water spray, which isn’t the right way to go about it.

The best way to do it is to place the bowls in the bottom rack, facing the center. This way, you are sure that there is no way the water spray will miss them.

While at it, ensure that there is as little overlap between the bowls as possible. This is to ensure that your dishes receive the full force of the water stream, without leaving any smudgy spots.

Call 877-959-3534 for an Appliance Repair Quote!

Load the dishwasher from the back to the front

How you load your dishwasher is vital to how well it functions. As a rule of thumb, load your unit from the back to the front.

By doing this, you maximize the space in your appliance and, at the same time, reduce the risk of breaking anything during the loading process. The back-to-front procedure also makes it easy to unload the dishwasher once all the dishes are clean.

Keep similar silverware together.

You should put similar silverware such as spatula, whisk, and other awkwardly shaped items together. This way, you free up extra space down the unit, making the unloading and putting away the items easy.

While you should put silverware together, take care that some silverware, such as spoons, don’t nest together.

Don’t rinse food from your dishes.

To make the work easy from the dishwasher, some homeowners rinse the food from the dishes. This is wrong. As much as you will have almost clean dishes by the time you are putting them in the dishwasher, you often don’t get the results you deserve.

This is because the soap particles don’t have an adequate surface to adhere to, so the dishes don’t get as clean as they should. Instead of pre-rinsing the dishes, scrape off any leftover food and then place the dishes in the dishwasher.

When you leave some food on the dishes, you give the soap something to cling to, which is handy in giving you the spotless dishes you deserve.

Call 877-959-3534 for an Appliance Repair Quote!

Be cautious about the soap you use

You can use any soap to clean the dishes, right? As long as the soap can clean the dishes, you are good to go, right? Well, this isn’t the case. You need to be cautious of the one you go for.

As much as using plenty of soap with plenty of bubbles might seem like a great idea, it isn’t, as the excess soap often causes a buildup of moisture that takes a long time to air out.

Appliance repair  professionals recommend you use the soap recommendations at the back of your appliance. If you aren’t sure about the right soap to go for, get the input of an expert.

Call 877-959-3534 for an Appliance Repair Quote!

The post appeared first on Express Appliance Repair

Call 877-959-3534 for an Appliance Repair Quote!

Just because something is a piece of clothing doesn’t mean that you should put it in the washing machine. This is because it might get damaged or, even worse, damage your precious and expensive appliance. Which pieces of clothing should you not put in the machine? Here they are as given by washer repair professionals:

Suits

If you have a premium suit, you shouldn’t put it in the washing machine when it gets dirty. This is because it will develop plenty of wrinkles that will be unsightly to look at. There is also the risk of damaging the premium material used in making the suit.

Instead of washing the outfit at home, take it to a dry cleaner, where it will be professionally cleaned.

Clothes covered in pet hair.

If you have cats or dogs in your house, you most likely have their hair on your clothes. A few hairpieces on the clothes aren’t a big deal, but if you have plenty of it, it’s unwise to put the outfits in the washing machine.

While the hair might come off after washing, it often sticks in the washing machine, where it might get transferred to other pieces of clothing you put there.

The best way to wash clothes covered in pet hair is using hand. First, remove all the fur if you have to wash them using a washing machine. One excellent tool you can use for the work is a lint roller.

Clothes with open zippers

If you run your finger along an open zipper, you will notice that each of the teeth catches your skin. This is the same thing that will happen to your washing machine.

When you run a cycle with unzipped zippers, they risk catching and damaging other clothing items, especially delicate ones. There is also the risk of the zippers scratching the insides of the drum.

To protect your washing machine and delicates, zip up all of your zippers to the top before you run a cycle.

For the buttoned clothes, leave the buttons unbuttoned to avoid putting too much pressure on the button thread during the cycle.

Call 877-959-3534 for an Appliance Repair Quote!

Swimsuits

Swimsuits are delicate; even if the label might say that the outfit is machine washable, it would be wise to avoid it and wash it by hand.

The reason for this is that the swimsuit material is at risk of stretching and sagging when subjected to a washing cycle, meaning that it will eventually lose its shape.

There is also the risk of the swimsuit getting caught on other pieces of clothing and getting damaged.

As mentioned above, to avoid this, gently hand wash the outfits.

Loose bras

Similar to swimsuits, bras are also delicate, so you can easily damage them when you put them in the washing machine.

In most cases, the wash ruins the bra’s shape, not to mention damaging the underwire.

There is also the risk of the metal clasps snagging and tearing other items in the load during the cleaning cycle.

To protect your precious bra, always use a laundry bag. You should put all your bras in this bag and throw them in the washing machine.

If you don’t have a bag, go the old route and wash the bras by hand.

Delicate sweaters

It’s not just the inner wears that are delicate. Sweaters can also be delicate. If you have a sweater made from wool, velvet, or cashmere, be cautious when placing it in the washing machine, as high temperatures can shrink the material.

There is also the risk of friction between the sweater and the washing machines leaving the outfit looking worn and ugly, and you don’t want this, do you?

Wash your delicate sweater by hand using a gentle laundry detergent to stay on the safe side. If you don’t have the time for it, take your sweater to the dry cleaners.

Even if the labels on the sweater say that you can machine-wash the outfit, don’t do it. If you have to do it, appliance repair professionals recommend that you place the sweater in a laundry bag that will protect the sweater from any form of damage.

Call 877-959-3534 for an Appliance Repair Quote!

The post appeared first on Express Appliance Repair

Call 877-959-3534 for an Appliance Repair Quote!

When replacing your home’s stove, fridge, or other appliances, what should you do with the old ones? Since these are large items, getting rid of them isn’t as simple as throwing them in the trash. The following tips can help you determine what to do with your old appliances.

Working Appliances

If your appliances are still working, a couple of options are available.

Donate to Charity

Some charities take working appliances and give them to those in need. Look for local charities that accept these appliances. In many cases, these charities will come to your home to pick up your old appliances.

Sell Online

You might consider selling your old appliances online if they’re still in good working condition. You can post information and photos of your appliances on websites or social media, such as Facebook Marketplace, Craigslist, and Nextdoor. Make sure you’re honest about the condition your appliances are in, so your buyers will know whether or not any appliance repairs will be needed.

PNM Refrigerator Recycling Rebate

If you’re a PNM customer, look into the company’s refrigerator recycling program. PNM offers a rebate when you recycle your fridge or freezer as long as it’s regular household sized, completely empty, and in working condition. You can schedule an appointment to have PNM pick up your appliance either in your home or outside, such as in your garage or on your porch or patio. PNM hauls it away at no cost to you and handles all of the necessary paperwork.

Roughly 4 to 6 weeks after having your fridge or freezer picked up, PNM will send you a check. The rebate is typically $75, although PNM runs specials from time to time. In July 2022, PNM offered $100 rebates for a limited time. Keep an eye out for upcoming rebate specials.

Call 877-959-3534 for an Appliance Repair Quote!

City of ABQ Large Items Pick-up

The City of Albuquerque’s Solid Waste department offers large item pick-up services for residents free of charge. You can call 311 or fill out an online form to request a large item pick-up for old appliances. You’ll need to put your appliances at the curb 5 feet away from mailboxes, trash cans, fire hydrants, and other objects to give the truck easy access.

If you’re scheduling a large item pick-up, you’ll need to empty your appliances. Fridge and freezer doors must be taped shut. You can request large item pick-ups throughout the year from Monday through Saturday.

Metal Recycling Yard

If you can transport your old appliances, consider bringing them to a metal recycling yard. These places recycle the metal components in your appliances so that they won’t end up sitting in a landfill. This is a good option if you can’t sell or donate old appliances, such as when they don’t work anymore.

Call 877-959-3534 for an Appliance Repair Quote!

The post What Do I Do with My Old Appliance? appeared first on Appliance Repair New Mexico.

Call 877-959-3534 for an Appliance Repair Quote!

The refrigerator is meant to keep the food cold and fresh, and this task is accomplished with the help of fans, an evaporator, a condenser, thermostats, and timers. While this is the case, the unit shouldn’t consume too much electricity that you spend more than you should.

If you have noticed that your fridge is consuming a lot of energy, you might be wondering why this is the case, right? According to refrigerator repair professionals, this can be brought about by several factors. Here are these factors and what you can do to solve them and prevent a similar issue from resulting in the future:

You have faulty gaskets

The gaskets between the door and housing wear out over time, and the adhesive holding them in place sometimes wears out too. The gasket rubber also sometimes loses its elasticity.

As the door gaskets fail, the fridge loses cool air, and the refrigerator has to work harder to maintain cool air inside. As you can guess, this means the appliance consumes more electricity than it should.

To prevent the appliance from doing this, make it a habit to inspect the gaskets as you are doing the cleaning. If you notice them worn out, replace them.

Call 877-959-3534 for an Appliance Repair Quote!

You have a faulty thermostat.

The thermostat is a switch that is usually open. The switch closes when the temperature gets too high, causing the fan to force cooler air into the freezer and fridge.

Sometimes, the thermostat fails and sticks in the closed position. This means that the fan forcing the cold air into the freezer and fridge works continuously, which triggers the refrigerator to draw more energy than usual.

Like with the gaskets, regularly inspect the thermostats (especially if you have an older refrigerator) and fix them if faulty.

You place hot food in the fridge.

You might argue that when you put hot food in the fridge, the food cools down faster. While this might be true, you should know that doing it increases the temperature inside, forcing the refrigerator to work hard to maintain low temperatures.

When you place hot food directly from the stove into the fridge, experts observe that it takes up to 2 hours for the refrigerator to bring the temperatures to normal levels. This means your fridge will be in working mode for two hours, consuming power nonstop for this long.

To save energy, don’t put food directly into the fridge. Let it cool first, then only put it there once it has fully cooled down. This way, you don’t increase the temperature in the fridge hence the unit doesn’t overwork to maintain the low temperatures.

Call 877-959-3534 for an Appliance Repair Quote!

You have compressor problems.

The compressor creates cold air for the fridge and connects to the heat-exchanging pipe coils outside the refrigerator.

An expansion valve at the end of the pipe system allows the refrigerant to exit as fine mist. Another set of heat-exchanging pipes winds through the inner walls of the fridge.

In the event the coils or expansion valve get blocked, the compressor keeps running, which triggers it to use excessive energy, even if there is no cool air reaching the fridge.

To prevent this from happening, regularly inspect your fridge and replace it if the compressor is faulty or too old.

If you have had your fridge for over a decade and it’s constantly bringing problems, you will save money and have peace of mind by buying a new unit.

Your fridge is too close to the wall.

Like any other heat-producing appliance, when you place your fridge too close to the wall, heat gets trapped between the wall and the refrigerator, leading to the appliance overworking and consuming a lot of energy.

Ensure a 30 cm gap between the wall and your appliance to stay on the safe side.

If you have a large house, refrigerator repair professionals recommend that you avoid keeping your fridge in the kitchen, as the room temperatures are high here.

You also should avoid keeping the heater, microwave oven, or any other heat-producing appliance close to your fridge.

Call 877-959-3534 for an Appliance Repair Quote!

The post appeared first on Express Appliance Repair

Call 877-959-3534 for an Appliance Repair Quote!

As a responsible homeowner, you want to keep your cooktops clean and well maintained, don’t you? The good news is that it’s possible to do it. All you need to do is to put into place these cooktop best practices:

Wipe the spills as soon as they happen

Spills might seem harmless to your cooktops, but they aren’t. According to appliance repair professionals, spills on your glass or ceramic cooktops are ugly to look at and hard to remove, especially when you let them dry on your surfaces.

Your cooktop controls are also affected and fail to respond as well as they should, especially when spilled with sugary liquids or grease.

Use the right cookware on your cooktop.

The cookware you use on your cooktop is of vital importance as it not only affects how well you cook, but also how long your cooktops last.

As a rule of thumb, don’t use cat iron cookware on a smooth top cooktop. This is because the cast iron cookware is most likely rough, and any movement of the top on the cooktop will leave scratches on the surfaces. You don’t want your cooktops to have any scratches, do you?

If you have an induction cooktop, don’t use any pan on it. Besides the fact that it doesn’t make sense to use a cheap pan on your expensive cooktop, remember that induction cooktops work extremely differently from ceramic cooktops.

They use a magnetic field under their surfaces to transfer heat directly to the pots and pans. As a result, they need special induction cookware with a ferrous base to transfer the heat as well as they should.

Call 877-959-3534 for an Appliance Repair Quote!

Use a fridge magnet to tell whether your cookware will work with your induction cooktop. If the cookware doesn’t stick on the magnet, get new units.

As you are choosing the right cookware for your home, remember to go with pans that sit flat on your cooktops as they provide even heat distribution. They also tend to be more stable on the cooktop.

This calls for you to avoid pans and skillets with rounded edge bottoms as they won’t provide you with an even heat distribution. The pans also tend to rock while on the cooktop; you don’t want this.

Clean the cooktops

You need to clean the cooktops to not only keep them looking good, but also remove any damaging materials that might be there.

While you might want your cooktops as clean as possible, be cautious about the materials you use. As a rule of thumb, don’t use harsh cleaners as they will damage your surfaces.

While a glass cleaner might seem like an obvious choice, don’t use it as it can leave streaks on your cooktop surface.

The right way to go about it is to use a dedicated ceramic cleaner and a microfiber cloth. These won’t cause any damage and will leave your cooktops looking as good as new.

When cleaning the surfaces, don’t forget the knobs. You should remove any dirt and scraps that might still be trapped under them.

Besides the cooktops, keep the bottoms of your pots and pans clean. This is because when the pots are dirty, they transfer grease and other forms of dirt on the cooktop, and you don’t want this. While you can remove the grease and other forms of dirt from the surfaces, they are usually hard to clean.

Call 877-959-3534 for an Appliance Repair Quote!

Don’t use your cooktop as a preparation space.

The smooth and tough nature of the cooktops can tempt you to use the cooktops as a food preparation surface, but don’t. The reason for this is that you can easily damage the cooktops.

To protect your surfaces, always use a chopping board.

Don’t stand on the cooktops.

The glass on your cooktops might appear tough and can stand your weight, but don’t stand on it. This is because it can easily shatter and break, especially when hot.

Don’t stand on the cooktops if you have to reach the top shelf. Instead, use a ladder.

Cooktop repair Northern VA also recommend against placing any heavy item on the smooth cooktops, even if you are doing it temporarily.

The post appeared first on Express Appliance Repair

Having a manufacturer’s warranty on a new appliance can give you some peace of mind. These warranties might offer some relief when it comes to paying for repairs. However, it’s important to understand the terms and conditions of your warranty, so you’ll know what’s covered. Keep these facts about manufacturer warranties in mind when purchasing new appliances.

Must Have Proof of Purchase

Most manufacturers require you to show proof of purchase before reimbursing you for the cost of repairs. When you purchase a new appliance, keep the receipt in a safe place, so you can easily access it if needed. Consider attaching your receipt to your warranty right away to keep it from getting lost or accidentally thrown out. This way, you’ll have it handy when you need to provide proof of purchase for appliance repairs.

Some Repairs Are Not Covered

Having a manufacturer warranty doesn’t mean all kinds of repairs are included in your coverage. Knowing what is and isn’t covered ahead of time can help you understand whether or not you’ll be paying out of pocket for repairs.

Which repairs usually aren’t covered? You might have to pay the full cost of repairs for damage resulting from misuse. For example, if you’re using your dryer, stove, or fridge incorrectly, your warranty is unlikely to cover these repair costs. Other kinds of repairs that usually aren’t covered include damage caused by poor or improper installation and cosmetic issues, such as dents or scratches.

Some Parts Have Extended Warranties/Coverage

Manufacturer warranties typically expire after a year, although this can vary. You might not realize that certain parts or components of appliances sometimes come with extended coverage or warranties. For example, circuit boards or motors inside appliances might be covered for up to 10 years instead of just a year. Go over the details of your warranty to see if your appliances have parts with extended warranties or coverage.

Warranties Are Not Transferable

When you sell your home, warranties on the roof or other components sometimes transfer to the new owner. However, this isn’t the way manufacturer warranties work. If you sell your home, the warranties on appliances won’t transfer to the new owner. Likewise, if you purchase a home, the warranty for any appliances that are included won’t transfer to your name. You should expect to pay out of pocket for appliance repairs in this case, unless you’re purchasing new appliances.

Warranty Technicians Work for an Independent Company

While you might assume that warranty technicians work for the manufacturer, this isn’t the case. These technicians work for independent companies, so they’re not responsible for being familiar with the terms and conditions of your warranty. They also can’t authorize any product replacements. Warranty technicians are only responsible for fixing your appliance. If you have any issues or questions about warranty coverage, you’ll need to talk to the manufacturer.

The post 5 Facts About Your Manufacturer Warranty appeared first on Appliance Repair New Mexico.

Call 877-959-3534 for an Appliance Repair Quote!

If you have a dishwasher, you want to get the most from it, right? Are you asking, how do I get the best results from my dishwasher? There are plenty of ways to go about it, with the common ones as given by dishwasher repair professionals being:

Use hot water

To have an easy time cleaning the dishes, use hot water as it has been shown to clean better. It’s always wise to check the hot water temperature at the kitchen faucet using a candy or meat thermometer. For best results, the temperature should be 120 degrees.

If the water is colder than this, adjust the settings on your water heater.

To ensure you have hot water throughout the dishwasher, run hot water in the kitchen sink before you start your dishwasher. This way, you ensure that, the tub fills with all hot water, which ensures that you thoroughly clean your dishes.

Scrape the food off the dishes

You might have heard that you should remove as much food from the dishes as possible to give your dishwasher an easy time. Removing some of the food from the dishes before washing them is wise, but you should avoid overdoing it.

As a rule of thumb, don’t rinse the dishes as you will not only be wasting water, but also worsening the detergent’s performance.

The right way to go about it is to scrape the large food particles from the dishes and then put the dishes in the dishwasher.

Call 877-959-3534 for an Appliance Repair Quote!

Run a balanced load

You should run a balanced load to prevent your dishwasher from making noises as it’s working. This calls for you to ensure that your dishes are balanced in all areas.

To ensure this happens, follow the recommendations given by your manufacturer on the proper loading of the dishwasher. As a rule of thumb, don’t crowd or overload the dishwasher, as you not only risk your appliance not running smoothly, but also risk blocking the spray arm and preventing the water from reaching all the surfaces.

Use the right cleaning cycle.

Most modern dishwashers come with different cycle settings meant to clean different dishes. These cycles include: regular cycle for normal cleaning, the heavy-duty cycle for deep cleaning, and the light cycle for china and fragile items.

You should use the right cycle to get the most from your dishwasher. If you aren’t sure about the right cycle for your dishes, consult the owner’s manual or an experienced professional.

Go easy on the soap

Using a lot of soap will get you cleaner dishes, right? Well, no. As much as you would want spotless dishes, using too much soap than necessary doesn’t give you the best results.

Besides still having soap on your dishes after running a cycle, using too much soap can ruin your dishwasher.

When choosing a washing cycle, refer to the instruction manual for directions on the best soap to clean the dishes and the right amounts to use.

Call 877-959-3534 for an Appliance Repair Quote!

Keep your machine clean.

Since your washing machine is responsible for cleaning, you don’t need to clean it, right? Well, no. Like other appliances, you need to clean your washing machine.

By doing so, you not only always have clean dishes, but also have a properly functioning dishwasher that is beautiful to look at.

To clean your dishwasher, run the appliance on a normal cycle using two cups of white vinegar. As a rule of thumb, don’t use a detergent to do the cleaning. This way, you remove any materials in the appliance and eliminate awful smells.

If you want to go the extra mile, wipe down the interior walls and racks of the appliance with a solution of vinegar and baking soda. Remember to rinse the surfaces properly after going over them.

Regularly inspect the dishwasher.

The same way you should regularly clean the dishwasher is the same way you should regularly inspect it and fix any issues it might be having. You can do the inspection yourself or hire a dishwasher repair professional to help.

When hiring professionals, ensure they are experienced and know what they are doing. Don’t hire a novice that will be a liability to have.

Call 877-959-3534 for an Appliance Repair Quote!

The post appeared first on Express Appliance Repair

Whether it’s a refrigerator, washing machine, or any other appliance you have in your home, you want it to last for as long as possible, don’t you? The cool thing is that it’s possible to do it. Here are tips given by appliance repair professionals that will ensure that your appliance lasts for as long as possible:

Pay attention to the instruction manual

If you are like other homeowners, you don’t even pay attention to the instruction manual. You look at it once, then throw it in the trash can, don’t you?

Don’t do this for your appliance to last a long time. Besides the manual telling you how to use your appliance properly, it also contains information on how to use it correctly so that it lasts for a long time.

You should regularly refer to the manual to know how to keep it in top shape.

Don’t overload the appliance.

Whether it’s the washing machine, refrigerator, dishwasher, dryer, or any other machine, you should never overload it.

You might have the impression that stocking more items in an appliance will save you time and money, but this isn’t the case in most cases.

When you put more clothes in the washing machine, the machine doesn’t run the cleaning cycle as well as it should, resulting in some of the clothes being dirty. As you can guess, this forces you to repeat the cleaning.

The same thing applies to the refrigerator. When you stock too much food there, you prevent the effective flow of cold air, which leads to some of the food getting spoilt, which, as you can guess, is costly.

Put only the required items in your appliances to stay on the safe side. Never overload them.

Keep the appliances clean.

Clean appliances are beautiful to look at and last for a long time, so you should strive to keep your appliance clean at all times.

The beauty is that you don’t need to use specialized cleaning materials—the good old soap and water is often enough.

To have an easy time, clean your appliances immediately after using them, then at least one thorough cleaning, once a week.

If there are hard-to-remove stains, remove them using vinegar or other tough material.

As you clean the appliances, pay close attention to the smells and ensure that you remove them.

Repair the appliances

Even the best-maintained appliance will break down at a certain time. When this happens, you should move with haste and fix it before the problem worsens.

Some homeowners ignore minor issues with their appliances, which is dangerous as these issues worsen over time and become hard to handle.

To stay on the safe side, fix even the smallest problem as soon as you notice it—don’t let it sit, hoping it will go away.

For peace of mind, ensure that the repair work is done by an expert that knows what they are doing.

As the contractor repairs the appliance, they also should inspect the unit for any other issues it might be having and fix them.

Use the right accessories.

Every appliance comes with its requirements and specifications. For example, a juicer should have the correct juicer attachments for it to function at an optimum level. The same thing applies to the sandwich toaster. To properly cook the bread, you must place it in the right slot.

For your appliance to last for long, you need to use the right accessories. This means that the manufacturer should recommend the power appliances, replacement parts, and other accessories.

Don’t mishandle your appliance.

The same way you don’t mishandle your car is the same way you shouldn’t mishandle your appliances. This means that you shouldn’t bang your refrigerator door. You also shouldn’t close the washer door with your leg.

Sometimes you will find that you can’t close your washing machine as well as you used to. If this happens, don’t force the door to close. You should realize that this happens when you have a problem, and you should find the source instead of forcing the door to close.

If you have encountered a similar problem before, you should try to fix the issue, but if the problem is new, let an experienced appliance repair professional help you.

The post appeared first on Express Appliance Repair

Your freezer is more than a convenient way to have ice cream always available. It’s an important part of your family’s health and safety. Improperly frozen food can become contaminated and have an impact on the health of your whole family. Some issues are simply annoying, but can indicate a problem that may become dangerous.

Freezer Not Freezing.

If your food isn’t actually freezing, then you are at risk of illness, in addition to losing food. It may indicate dusty, dirty coils, or it may be a problem with the evaporator fan motor, or the starter may not be working right. If you want to deal with the issue right, contact one of the experts at Dave’s Appliance.

Frost Buildup.

Frost buildup can be irritating. It decreases storage space in your freezer, and it may trap odors, or encourage freezer burn. Frost buildup can indicate a number of issues. It may result from improper fridge position, poor seals, dirty coils, or clogged freezer drain. Too much frost buildup results in improper freezing of food, so it’s best to deal with it right away.

Freezer Runs Constantly.

When your freezer runs all the time, it is definitely working too hard. It may result in variable freezing of the food, and it is certainly costing you money in the electricity used. The easiest solution is that the temperature is set too low. Otherwise, it could be the condenser fan motor or evaporator fan motor. Those repairs need the expertise of Dave’s Appliance.

Clicking Sound.

A clicking sound from your freezer means that you should call Dave’s Appliance. Almost certainly, it’s not something that can be easily rectified. It may be a malfunctioning starter relay, or it could indicate that coolant is not moving through the coils properly. In any event, it is an issue that requires professional attention.

Defrost Drain Issues – Leaking Water

If it is only the freezer and not the refrigerator that is leaking water, it is probably a clogged or frozen defrost drain. It is possible for you to remove the cover to expose the freezer drain and check if there is an obvious clog. If you can do so easily, extract it. If the drain is frozen, you may want to contact Dave’s Appliance.

Defrost Drain Issues – Frozen Drain
If you’re uncomfortable removing freezer covers to expose the defrost drain, or are worried about what you may find once you do, just call Dave’s Appliance. In addition to the typical issues with the defrost drain outlined above, there’s the possibility that the drain strap may have fallen off or deteriorated. If so, Dave’s Appliance can fix or replace it.

Like any appliance, your freezer benefits from regular maintenance. If you’re having issues, try these maintenance tips to see if the problem disappears.

Position. The refrigerator needs to be located away from the wall slightly to allow enough room for the air to circulate. The heat from the compressor needs to have sufficient room to dissipate.

Temperature. Sometimes the temperature setting becomes moved by mistake. Your freezer should be set to 0º to keep food properly frozen. It’s a good idea to keep a thermometer in your freezer to monitor the temperature.

Door seals. The seals of the freezer should be clean and in good repair. Simply use soapy water and then apply a thin layer of petroleum jelly to maintain the seals.

Coils. The condenser coils can become dirty and dusty. Use a vacuum to clean the debris off.

You should be able to enjoy the food from your freezer without fear. You don’t want to take chances with your family’s health, so If you have any concerns about your freezer working properly, call the experts at Dave’s Appliance, and we’ll be able to diagnose and fix the problem.

The post Reasons Your Freezer May Not Be Freezing appeared first on Dave's Appliance Service.