Author: admin

The Ultimate Dishwasher Hacks You Didn’t Know You Needed

Using a dishwasher is relatively simple, right? You load it up, insert a tablet, press start, and voilà, the dishes are done.

While it’s supposed to be easy, studies show a considerable difference between novice and boss levels regarding getting the best clean from your machine.

Studies show that many homeowners not only fail to use their dishwashers properly but also improperly use their machines to the extent that they make too many mistakes that ruin their units to the extent that they have to hire dishwasher repair professionals to help fix them.

The cool thing is that there are several things you can do to properly use your dishwasher so that you get highly efficient results and, at the same time, keep your unit in top shape. The things you need to do include:

Don’t bother with expensive dishwasher tablets

Although dishwasher tablets can be costly, you don’t have to spend much money to have spotlessly clean dishes.

Some of the costlier products are indeed genuinely effective. However, for a fraction of the cost, a low-cost brand will provide you with an excellent wash.

You only need to research and find a cheaper tablet to give you the results that you are after.

Place the dishwasher tablet on the floor of the dishwasher

It may only save you approximately five seconds, but throwing your dishwashing tablet on the dishwasher floor is the best way to go about it.

The dispenser is meant explicitly for powder detergents. It does not open until after the first rinse cycle, allowing the powder to dry before being poured at the beginning of the wash cycle.

Tablets will not wash away, and the water in the first rinse cycle will begin to work on the dissolvable wrapper, so it’s ready to use as soon as the wash cycle begins, especially if you’re running a rapid program.

So save yourself the time and bother of fumbling with the nasty little dispenser door and simply lob it in. You’ll save time, plus it’s exciting just to chuck the tablet in – it feels like violating the rules, but you aren’t causing any harm.

Scrape the dishes, don’t rinse them.

Avoid rinsing your dishes to save even more time (and water, too).

In addition to using more water, rinsing your plates can cause your dishwasher to think that your plates are cleaner than they are. As a result, it may turn down the power and not clean your dishes as thoroughly. And you don’t want this, do you?

The whole point of owning a dishwasher is somewhat negated when you have to rewash your dishes after they are taken out of the machine. To clean your dishes, you spend a lot of money on a dishwasher, right? Therefore, have faith that it can manage your soiled dishes.

Simply scrape off any large pieces of food, place your dishes in the dishwasher, and let it do its work.

Have a plate with you when buying a dishwasher.

No, this isn’t only to keep you from becoming hungry while shopping for appliances. It’s so you can try out your dishwasher for size.

Before buying, you must ensure your plates will truly fit in your new dishwasher. Also, if you wash your wine glasses in the dishwasher, bring one along to ensure it fits.

You should note that some dishwashers feature adjustable-height top baskets, which allow you to change the rack height to accommodate larger plates. An ‘easy-lift top basket’ is the best version; it will enable you to adjust the height while the dishwasher is filled, so you won’t have to unload it to fit that final plate.

They come particularly handy for dinner gatherings where larger platters have been used or if you forget to bring a plate when shopping for a dishwasher.

Properly stack your dishes.

Dishwasher stackers can be divided into two categories: chaotic and perfectionist. In most cases, the careless stacker frustrates the perfectionist while unaware of it.

You can optimize your stack style when you’re (inevitably) re-stacking the dishwasher, but you might not be able to influence the habits of your other stackers.

Consider water flow. You want to ensure that water can easily reach all dirty surfaces.

This implies that the business end faces inward, the larger items are on the outside, and the smaller items are toward the center.

And make sure the dishes are separated – they should not be spooning.

Leave the door open after a cycle.

Between washes, you should leave the dishwasher door slightly open.

If you close the door, the dishwasher won’t be able to dry out, so you could end up with mold and bad smells. And you don’t want this, do you?

Additionally, the rubber seals will constantly be compressed while the door is tightly closed, which may alter their shape and, consequently, their capability to seal the unit.

Leaving the door open after a wash will save you a lot of work later on and ensure that your dishwasher is always in top condition and smells fresh.

Clean the filters

You probably realize you should do this. But, honestly, who wants to shove their fingers into a slimy Hellmouth of sludge, meat muck, and mushy beans?

The same applies to picking trash out of the spray arms’ tiny openings; it is nasty and laborious.

You must take the plunge at least once a month to keep your dishwasher clean and unclogged, even though it’s an ick factor.

Cleaning your dishwasher filter is up there with going to the dentist and doing your tax return: no one wants to do it, but it’s part of life.

Additionally, things will go more smoothly if you stay on top of things, just like with dentists and taxes. Clean dishes and a contented dishwasher are the results of a clean filter.

Do your future self a favor and stay on top of filter cleaning so you never have to find out how disgusting a blockage can be.

You can do the work by yourself, but if you don’t have the time or aren’t comfortable doing the job, you can always hire appliance repair Springfield professionals to help you out.

The post The Ultimate Dishwasher Hacks You Didn’t Know You Needed first appeared on HVAC Repair, appliance repair. The post appeared first on Express Appliance Repair

LG Recalls Electric Ranges Due to Fire Hazard

500,000 LG Electric Ranges Recalled Due to Fire Hazard – Check If Yours Is Affected

At Sarah’s Appliance Repair, our priority is keeping our customers informed and safe when it comes to their home appliances. LG has recently issued a recall affecting approximately 500,000 electric ranges due to a fire hazard. If you own an LG range, read on to see if your model is affected and learn what steps to take.

Why Are These Ranges Being Recalled?

The recall involves LG Slide-In and Freestanding Electric Ranges with front-mounted knobs. These knobs can be accidentally activated by humans or pets, potentially leading to fires.

 

Incident Reports:

  • The Consumer Product Safety Commission (CPSC) has received at least 86 reports of unintentional activation.
  • Over 28 fires have been linked to these ranges.
  • Five fires caused extensive property damage totaling over $340,000.
  • At least eight injuries, including burns, have been reported.
  • Three fires resulted in pet fatalities.

Which Models Are Affected?

LG has identified the following models as part of the recall. The model number can be found inside the oven door or storage drawer at the bottom of the oven.

Model Number Serial No. (From) Serial No. (To)
LDE4411ST 607KMXXXXXXX 807KMXXXXXXX
LDE4413ST 506KMXXXXXXX 408KMXXXXXXX
LDE4413BD 606KMXXXXXXX 901KMXXXXXXX
LSE4611ST 607KMXXXXXXX 206KMXXXXXXX
LSE4611BD 704KMXXXXXXX 704KMXXXXXXX
LSE4613ST 510KMXXXXXXX 106KMXXXXXXX
LSE4613BD 604KMXXXXXXX 106KMXXXXXXX
LSEL6337D 102KMXXXXXXX 304KMXXXXXXX
LSEL6337F 102KMXXXXXXX 312KMXXXXXXX
LSEL6331F 201MMXXXXXXX 312MMXXXXXXX
LSEL6331F 310KMXXXXXXX 312KMXXXXXXX
LSEL6333F 107MMXXXXXXX 311MMXXXXXXX
LSEL6333F 308KMXXXXXXX 312KMXXXXXXX
LSEL6333D 107MMXXXXXXX 312MMXXXXXXX
LSEL6333D 309KMXXXXXXX 312KMXXXXXXX
LSEL6335D 102KMXXXXXXX 312KMXXXXXXX
LSEL6335F 102KMXXXXXXX 312KMXXXXXXX
LTE4815BM 802KMXXXXXXX 001KMXXXXXXX
LTE4815BD 802KMXXXXXXX 207KMXXXXXXX
LTE4815ST 801KMXXXXXXX 205KMXXXXXXX
LRE4215ST 601KMXXXXXXX 903KMXXXXXXX
LTEL7337F 206KMXXXXXXX 312KMXXXXXXX

What Should You Do If Your Range Is Affected?

LG is offering a free warning sticker and instructions on how to use the Control Lock or Lock Out feature to prevent accidental activation.

How to Check If Your Range Is Affected

LG has also released an instructional video explaining how to use the Control Lock feature: Watch it here.

Safety Tips for LG Range Owners

Until you receive your warning label and instructions, consider these safety measures:

  • Keep children and pets away from the range knobs.
  • Always check that knobs are turned off before leaving home or going to bed.
  • Do not place objects on the cooktop when it is not in use.

Where Were These Ranges Sold?

These LG ranges were sold at major retailers including Best Buy, Costco, The Home Depot, Lowe’s, and other appliance stores nationwide, as well as online at LG.com. The affected models were available for purchase between 2015 and January 2025, with prices ranging from $1,400 to $2,650.

Stay Informed and Stay Safe

If you own an LG electric range, we strongly encourage you to visit the recall website and check if your model is affected. Taking immediate action can help prevent potential fire hazards and ensure your home’s safety.

The post LG Recalls Electric Ranges Due to Fire Hazard appeared first on Appliance Repair New Mexico.

How Do I Make My Fridge Run Cold?

appliance repiar

If your refrigerator is too warm, it’s quite normal to feel a little alarmed, especially if you’ve been keeping some delicious perishables chilled there. Therefore, you might question why your refrigerator isn’t as cold as it once was when you went inside.

Well, there are plenty of reasons why your fridge might not be as cold as you may want it to be, and there are a number of things you can do to fix it. Some of the things you can do, as given by fridge repair professionals, include:

Quickly fix the appliance

Finding a quick and simple solution to your refrigerator’s cooling issue should be your initial course of action. When it comes to keeping their refrigerators cool, many homeowners make plenty of mistakes. The first involves changing the setting, while the second one consists of obstructing the freezer’s cold airflow. To fix the unit, you need to:

Modify the temperature setting.

Locate the temperature setting first. This should be a knob or switch that you turn to show the proper temperature inside your refrigerator. There’s always a chance that someone loaded or unloaded anything from the fridge and accidentally changed the setting. Make sure the thermostat is colder than it was by adjusting it between the mid-cold and the coldest settings.

Clear the Compartment Vents.

The next item to check is your vents. Cold is created beneath or near the freezer and directed through a vent between the freezer and refrigerator chambers. If this vent is clogged, cold air cannot move into the refrigerator, and the temperature may be too high. This can also lead to the freezer being excessively cold or not defrosting correctly.

Make sure the vent is clear on all sides. Remove bulky boxes, bagged items, and any frost that has accumulated on the vent.

Fix the faulty components.

Once you’ve ruled out any simple causes for your warm fridge, it’s time to investigate mechanical problems. A variety of systems keep your fridge cold, and numerous small-to-medium repairs can make a difference or solve the problem.

Align the Doors

One possibility is that your door isn’t correctly positioned. If the door does not close properly, chilly air escapes. Your fridge will use more electricity to stay cool, and it will most likely be warmer than necessary.

The first place to look is the door alignment. Remove all heavy items from your door and inspect the hinge alignment. Tighten your hinges to provide a more aligned seal.

Clean the coils.

Another common issue is with your condenser coils. The coils radiate cold, and air is pumped over them to cool the freezer and refrigerator. If the coils are covered in dust, the cold cannot reach the air and, hence, the fridge. You can clean the coils with a towel or a special condenser brush.

Replace the thermistor.

The thermistor is your defrost thermometer, which monitors how cold the freezer and refrigerator are and cycles the chilling process accordingly. If your thermistor fails, your refrigerator cannot accurately regulate its temperature. If the thermistor fails to function properly, you must replace it.

Change the circulation fan.

Your refrigerator is equipped with two fans. The first is crucial since it blows air over your condenser coils. The circulation fan between the freezer and refrigerator sections, however, is the one that is most likely to result in a warm refrigerator.

The fan is necessary to force cold air from one compartment to another. You need to access the fan by removing the inside panels to replace it if it breaks.

Ensure that the condenser fan motor has not stopped.

Unplug your refrigerator and locate the condenser fan motor, which is normally located on the lower back of the fridge. Remove the access panel. Check to see if the fan can move freely and clear any debris that may be obstructing the fan blades.

Also, look for signs of wear and tear on the fan. If there are any physical concerns, you will have to replace it. If you are familiar with electrical work, you can use a multimeter to examine the condenser fan motor for any difficulties with the electric supply. If you have a problem, get in touch with a refrigerator repair specialist for assistance.

Fix the Defrost Assembly.

Finally, you may need to repair your defrost sensors, timer, or other components of the assembly. A freezer that overfrosts or defrosts too frequently can produce a warm refrigerator.

Clever tricks

If your fridge is in good working order (or you are waiting for a new part to come), there are a few tactics you can use to make it cooler inside and keep it chilly while running. These are ingenious fridge management tactics that trap extra cold within the fridge and build cold batteries that will last even when your fridge is turned off or left open.

These strategies include:

Stock the refrigerator.

Stock your refrigerator with food. The more food that is cooled, particularly wet or thick food, the colder you can keep in the fridge. The excess contents work as cold batteries. So, if the refrigerator is open or does not keep a cool air temperature, thick, cold foods can help.

Cool gallons of liquid

These also make wonderful cold batteries. Keep a gallon of orange or apple juice in the refrigerator to improve your health and fridge function. If you need to leave your fridge mostly empty, keep a couple of gallon jugs of water inside as cold batteries.

Defrost regularly.

Finally, make sure your refrigerator remains defrosted. If your refrigerator does not have a defroster, manually defrost it before frost forms on the vents. If you have a defroster, make sure it works properly.

Parting shot

Keeping your refrigerator cold is easier than you think. Maintain your refrigerator, keep the door closed, and fix any broken parts along the route.

While there are a number of things you can do, such as placing liquids in the fridge, there are a number of issues that require you to hire professionals. When this happens, you should always hire appliance repair Northern VA experts who know what they are doing.

The post How Do I Make My Fridge Run Cold? first appeared on HVAC Repair, appliance repair. The post appeared first on Express Appliance Repair

What Is the Correct Way to Use a Washer?

The days of randomly selecting your cycle and loading your laundry into a machine with a detergent that is not proportioned correctly are long gone. To avoid issues and ensure that you don’t keep hiring a washer repair professional now and then to fix your unit, you need to use your unit correctly.

To help you out, here is a guide on how to properly use your machine to conserve energy and avoid issues:

Sort the clothes into categories.

The first step is to separate your laundry into different categories according to the kind and color of the fabric. To prevent destroying your materials, you should also look for washing instructions on the care label of every item of clothing.

You’ll most likely come across a lot of statements like “delicate wash,” “cold wash only,” or “wash with like colors.” You should sort all of the laundry into similar groups based on color and washing instructions: denim with denim, lights with lights, whites with whites, and darks with darks.

Be sure to consider each garment’s weight as well. For instance, you should keep denim and heavier materials (such as canvas) together and wash them separately because they can easily harm more delicate fabrics.

Noting which items need to be hung or laid flat to dry and which should be tumble-dried later.

Be sure to give your most delicate pieces of laundry extra attention: to avoid damage, wash them by hand, in a mesh bag, or on the delicate cycle.

Choose the correct washing cycle.

You need to choose the appropriate cycle setting. While cold water can make whites appear dingy, warm water can rapidly and easily shrink or damage clothing that is supposed to be washed cold.

Which temperature to use should be indicated on your clothing labels, but it’s crucial to understand the specifics of each choice. The meanings of the three most prevalent cycle types are listed below.

Delicates: This cycle has less agitation and a slow spin speed. Even if your machine automatically sets the temperature to warm, manually adjust it because delicates typically require washing in cold water.

Regular wash: This cycle is designed for clothing typically heavy to normal weight, such as denim, cotton, t-shirts, and towels. It has a high spin speed and medium to vigorous agitation.

Although your machine may come with a warm or cold temperature option by default, washing colors on cold and whites on warm or hot is usually advised. (Remember: Cool Colors, White Heat.)

Permanent or Perm Press: This cycle combines slow and quick movements. Slow spin speed (to avoid creases) and rapid agitation (to remove dirt and stains). It is designed for synthetic materials that require a thorough cleaning but are prone to wrinkling, such as polyester or nylon.

Remember to use a cycle that protects your clothing and maintains maximum cleanliness.

Set the proper water temperature.

Using the proper water setting in your washer can make a massive difference in washing. Hot water, for example, sanitizes and kills germs more effectively, but it might shrink your garments, discolor your textiles, set some stains, and consume significantly more energy.

Therefore, save hot water washes for bedding, bath and kitchen towels, durable textiles, and anything too dirty. Use warm water for dark colors, the permanent press cycle, and pretty filthy loads.

Finally, use cold water in the delicate cycle for delicate laundry materials with potentially bleedable dyes or clothing that isn’t too unclean. You can save energy and help the environment by washing your clothes in cold water, which is the gentlest way to do it.

Add the right detergent.

See your washer’s manual before adding your preferred detergent and fabric softener to determine which goes where. Because too much laundry detergent might lead to issues, check the back of the box and any labels on your washing machine to determine how much you should use. The amount required varies depending on the load size and type of washing machine you use.

Add detergent before loading your soiled laundry unless your washing machine’s instructions specify otherwise. Don’t add more detergent than necessary; keep it below the fill line indicated on the cup.

This is especially crucial if you use a high-efficiency washing machine, which uses less water than earlier models, or a concentrated detergent.

During the wash cycle, extra detergent produces more suds, which raises the tub’s dirt, smells, and bacteria. This leaves a residue that might make your next load of clothes look dingy, fade colors, and attract more dirt.

Use as little detergent as necessary for the best cleaning because residue buildup can also encourage the growth of bacteria and odors.

Load the machine properly.

You need to load your clothing in the washing machine properly. As a rule of thumb, avoid packing the machine too full, which could prevent the garments from getting the proper wash. Inaccurate numbers may also result in damage and operational issues.

Clothing that is very tightly packed becomes wrinkled and only half clean. When there are too many items in the machine, there is less space for water, which reduces water circulation and restricts how well the machine can clean.

Inside the machine, the clothes should be spread out evenly and loosely. The washer tub shouldn’t be more than three-quarters full, even with a heavy load of washing.

Avoid packing garments past the final row of holes at the front (the row nearest the door) of front-loading washing machines. And don’t put clothing on a traditional top-loader over the agitator.

Fabrics might be damaged if the heavy load rubs against the agitator. Overloading is the most common cause of “walking” washing machines, which shift out of place and become unbalanced during spin cycles.

You should note that consistent overloading might distort the washer’s frame or harm the motor, necessitating repair or replacement from an appliance repair Springfield professional.

You should be ultra-cautious about overloading and if you have to hire a repair professional, ensure they are experienced and know what they are doing. You don’t want someone who causes more problems than were originally there.

The post What Is the Correct Way to Use a Washer? first appeared on HVAC Repair, appliance repair. The post appeared first on Express Appliance Repair

Tricks to Keep Your Glass/Ceramic Cooktops in Top Shape

Do you have a glass or ceramic cooktop you are proud to own? Cooking can be a breeze with these sleek, contemporary appliances, but they also need special care to stay brand new. You should note that you risk having a stove covered in stains and food buildup if you don’t give your cooktops regular care and attention.

Thankfully, according to cooktop repair professionals, there are numerous ways to maintain the brand-new appearance of your cooktop. Although there is no assurance that these suggestions will keep your cooktop safe, they can make a significant difference. These ways include:

Be cautious of the cookware you use

You should take extra care to select cookware that won’t harm the smooth surface of a ceramic or glass cooktop. As a rule of thumb, never use cookware made of ceramic or stoneware with rough, unpolished bases. Avoid placing dishes on the cooktop while removing them to cool, and keep those parts in the oven.

Do you have a favorite cast iron skillet? Regretfully, you must keep it away from your burner. Any movement of a cast iron pot or pan on the cooktop can cause scratches because cast iron cookware is often very rough. And you don’t want this, do you?

Lastly, it is not wise to use pans or skillets with rounded edges. A rounded edge may result in uneven heat distribution, subjecting the glass or ceramic to needless stress. When your old cookware starts to warp, replace it with new cookware that lies relatively flat.

Be ultra-cautious when handling your cookware.

Now that you know you have the correct cookware, it’s critical to manage it carefully to maintain the brand-new appearance of your stovetop. Don’t drag heavy pots, pans, and plates across the cooktop.

Remember that cookware can scrape if dragged, even a short distance. Move your pots and pans to a different part of the cooktop to lessen the chance of scratches.

Make sure the bottoms of your pots and skillets are spotless before cooking. Electric stovetops frequently have rings or other stains that are exceedingly challenging to remove with a scrub.

This is often caused by oil accumulation on the bottom of the cookware, which can cook into the glass or ceramic when heated. By keeping your cookware clean, you can avoid wasting a lot of time and effort cleaning your stovetop.

Don’t spill while cooking.

Even though there are several ways to clean an electric stovetop, you should still avoid spills when cooking. Spills can quickly become hot and adhere to glass or ceramic surfaces, making cleanup difficult.

When boiling or cooking anything that contains sugar, exercise extra caution. Sugar is especially harmful to electric cooktops because the molecules attach to the glass as they cool, damaging the cooktop’s surface. You should be particularly cautious when working on white or light gray cooktops. When you have spills of sugar or any other material, clean them up immediately.

Be cautious of heat

Remember that the high heat may cause unpleasant chemical reactions in the glass. As such, when using your stovetop, follow a few general guidelines.

Never, even momentarily, set anything cumbersome or stand on top of a glass stove. At first, the glass might seem to support the weight, but as the cooktop heats up, the surface will expand and may shatter or crack. And you don’t want this.

You should also never set hot glass bakeware on a smooth cooktop to cool. Instead, place it on a trivet or dry towel. A heated and cool surface coming into direct contact could shatter either piece of glass.

Clean your cooktops properly.

Sometimes, baked-on food is inevitable, no matter how carefully you use your glass or ceramic stove. To keep your surfaces clean, you have to clean them. To help you out, here are tips on how to go about it:

Establish a weekly routine for cleaning the cooktop. Sprinkle baking soda on top of the white vinegar sprayed on the cooktop. Allow the mixture to operate for around fifteen minutes before wiping it away with a fresh towel soaked in hot water.

The chemical reaction that happens when alkaline baking soda and acidic vinegar combine can loosen most baked-on meals.

Scrubbing deeply embedded stains with a toothbrush and baking soda toothpaste can occasionally remove them. However, because baking soda is relatively abrasive and can scratch the glass, do not scrape the entire cooktop.

Don’t use industrial abrasive cleaners or cleaning pads to clean your glass cooktop, as they can damage them.

If used immediately after each cooking session, regular grease-cutting dish soap sprayed with a non-abrasive sponge usually wipes up spilled food from a glass cooktop. Before proceeding, make sure the cooktop is completely cool.

You can also use a sharp razor blade to scrape away small areas of baked-on food. When using it ensure that the blade’s edges don’t scratch the glass.

You should note that you can easily remove glass cooktop stains with a Magic Eraser.

Use a solution of hydrogen peroxide, baking soda, and Dawn dish soap to remove stubborn stains.

For cleaning ceramic/glass cooktops, an ordinary window-glass cleaner frequently works just as well as specialty cooktop cleansers. After cleaning, be sure to rinse the cooktop well.

Parting shot

A clean cooktop looks great and works better, enhancing the pleasure of cooking. These guidelines will help you maintain a spotless kitchen and maximize the performance of your equipment.

You can do most of the work, but if you notice an issue with your appliance, don’t try to fix it, as you will probably cause more problems than were there.

For example, if everything seems to be in place, but your cooktop isn’t cooking, or you feel it’s consuming more energy than it should, let an experienced appliance repair Fairfax professional look at the problem.

When hiring professionals, ensure they are experienced and know what they are doing. You don’t want someone who makes the problem worse than it already is, do you?

The post Tricks to Keep Your Glass/Ceramic Cooktops in Top Shape first appeared on HVAC Repair, appliance repair. The post appeared first on Express Appliance Repair

Common Fridge Problems and How to Fix Them

Your refrigerator is the house’s workhorse, keeping food chilled or frozen throughout the day and night. According to HomeAdvisor, hiring refrigerator repair professionals now and then to repair your unit can be expensive. The good news is that you can save money by fixing the problem yourself.

The most common refrigerator problems are leaks, loud noises, cooling troubles, and ice makers that don’t operate properly. As a homeowner, you can troubleshoot these frequent refrigerator problems with simple equipment such as a manual screwdriver and a cordless drill, as well as other readily available and inexpensive parts.

To shed more light on the issue, here are some of the most common refrigerator problems and how to fix them:

Leaking unit

Do you have water on your kitchen floor? What about pools that form on the interior bottom of the refrigerator? You have a leaking refrigerator. The good news is that leaky refrigerators are relatively simple to fix because there are just a few likely causes of the problem: door gaskets, defrost drains, and drain pans.

If the soft rubber-like door gaskets are the problem and they fail to seal properly, water may seep from the bottom. You need to use warm, soapy water to clean the seal and any refrigerator sections it comes into contact with.

If that doesn’t work, replace the door gaskets completely.

You also should check to see if the defrost drain leading out of the freezer is plugged. If this is the case, remove any obvious impediments. You should use hot water to break up any remaining obstructions in the tube.

The drain pan at the bottom of the refrigerator may also be so full that water is spilling out. If you are having this problem, you need to clear the drain pan of water. After removing the drain pan, clean it with warm, soapy water and a soft cloth. Do not use abrasives.

If the drain pan smells bad or has mold patches, mix a 1:10 bleach solution with warm water. Ensure that you rinse and dry the pan before replacing it.

Extremely loud refrigerator

Refrigerators generate sounds that often come from ice clattering into the storage bin and refrigerant hissing through lines. You should note that both of these sounds are expected and usual sounds. So, if you have them, you have nothing to worry about.

While this is the case, you should note that sometimes the unit makes weird noises. Many people have the impression that these noises are common with old appliances, but this isn’t the case. Even new refrigerators can make weird noises.

The most common noises are buzzing, humming, whirring, and vibrating noises. If your unit is making any of these noises, you should move with haste and fix them as soon as possible.

Your fridge has leveling legs. As your home ages and your kitchen floorboards sag, the refrigerator needs to be balanced again. The fridge might be making weird noises due to the legs being imbalanced.

You should use a wrench to turn the legs. For the best outcome, ensure that the doors close on their own when opened halfway (45 degrees).

You should adjust the legs with the door halfway open and continue until the door swings close.

You can also order special dense foam mats and place them under the refrigerator to reduce vibration transmitted through the legs to the floor. This repair is especially useful if the people below you complain about refrigerator noise. You’ll need to place anti-vibration pads under each of the fridge’s four feet.

Ask a helper to tip the refrigerator back while you insert the pads, and then repeat on the opposite side.

Do not stand on the tipped side, as the fridge may tip over on you.

The fan distributes air from the coils to keep the temperature consistent. In some cases, the fan may be rattling due to old or broken rubber grommets. Grommets are inexpensive, and you can buy them online. The evaporator fan is accessible from inside your freezer compartment.

What you should do is unplug the device and remove all goods and shelves from the freezer. Remove the fan from the freezer by opening the access door at the back with a screwdriver.

You also should remove the old grommets and replace them with new ones. Once you are done, replace the fan and tighten the screws.

The refrigerator is too cold or freezing over.

You want your refrigerator and freezer to stay cold. But is it becoming too much? After you’ve tried readjusting the thermostat, here are some alternative fixes.

Cold air may be constantly pouring into the chamber, unregulated by a damper that remains open. The thermostat controls the damper, which is placed between the cooling and freezing compartments.

You can easily buy refrigerator thermostats online. Find your model number on the inside or back of your door, and then order a compatible thermostat.

You should unplug the fridge first, then open the cooling compartment. Using a Phillips head screwdriver, remove the top cover of the cooling chamber (inside the box). Usually, only a few screws hold this in place.

Use the same screwdriver to remove the plastic control assembly cover.

The lid is fastened to the refrigerator with wires, so lift it cautiously. The thermostat will be a bronze-colored metal device connected by copper wires and a plastic capillary tube.

You can find it useful to photograph the wire arrangement so that you can replicate it with the new thermostat. Pull the wires straight out by hand, then remove the tube.

The new thermostat installation is a one-to-one replacement with two black wires doubled up. It is connected to one terminal, one orange wire, and one green ground wire.

You should attach the capillary tube and then replace the assembly covers with the appropriate screws.

Parting shot

These are some of the most common problems that your refrigerator might have. While you can fix some of the issues, you should note that sometimes the problems are complex. If this is the case with your unit, you should let experienced appliance repair Northern VA professionals handle it.

The post Common Fridge Problems and How to Fix Them first appeared on HVAC Repair, appliance repair. The post appeared first on Express Appliance Repair

The Ultimate Refrigerator Maintenance Checklist

Maintaining your refrigerator is critical to keeping your kitchen clean and your utility bills low. A fridge that is not properly maintained will consume more electricity than necessary. According to refrigerator repair professionals, preventative maintenance lets you detect a problem before it grows or worsens to the point where it can no longer be repaired.

You also risk not maintaining appropriate temperatures within the fridge, allowing food to degrade faster. Suboptimal temperatures can also cause mold to grow in various compartments and waterlines.

To keep your fridge in top shape, you have to be strategic in organizing your maintenance schedule. To help you out, here is how to go about it:

Tasks you should do every month

You don’t have to be a skilled repair professional for efficient preventive maintenance. There are simple actions you can complete once a month to protect your most vital kitchen appliance. These tasks include:

Deep clean the fridge

Many people keep putting it off, but deep cleaning the refrigerator does not take as long as you think. Usually, you don’t even need to keep anything in a cooler. Remove everything from your refrigerator and arrange it on the counter in a single stack.

Make sure you remove and clean all of the shelves. Use an all-surface cleanser or a vinegar-based solution to remove organic residue from spills and seepage. Next, clean the fridge’s walls, the top and bottom of each shelf, and the inside of the drawers.

Get rid of the spoiled food.

Pay attention to what goes into the refrigerator as you refill it. As a rule of thumb, discard any food, beverages, or containers that have been there for at least a month or that you do not recall putting in the first place.

Check expiration dates regularly to avoid storing ruined food. This way, you can prevent mistakenly consuming or drinking something you shouldn’t. This strategy can also assist in avoiding unattractive and harmful mold development and contamination.

Ensure the vents are clear and open

No containers or bags should obstruct the vents between the freezer and refrigerator. This is where the chilly air comes from, so these sections require adequate ventilation.

Things to do every few months

You should strive to go through these processes at least twice a year if not more. These steps are crucial for keeping your fridge in peak condition for an extended period.

Test your door seals.

Check the seals on your refrigerator and freezer doors every two to three months. First, take a few minutes to clean the seals and remove debris. After cleaning, check the seals for wear and tear or breakage.

A simple solution is to close the fridge door with a $1 bill. After you close the door, try to remove the bill without opening it. If you can remove it, you may need to repair your door seals in poor condition.

Swap out the water filters.

You should replace these filters every three to nine months, depending on how much water or ice you use. A good rule of thumb is to update your water filter every six months.

Clean the coils

The coils on the rear of your refrigerator are responsible for heat removal. You’ll need to relocate your refrigerator to access the coils, and you should disconnect it before cleaning them. Then, use a vacuum cleaner or a soft brush to remove the dust.

Clear out the drain pan

To eliminate condensation, your refrigerator employs a drain hole and a drip pan. Your owner’s manual should include instructions for removing mineral deposits from the drain hole. You’ll also need to empty the drip pan and remove any debris.

What to do once a year

Defrost the freezer

When your freezer or refrigerator has accumulated frost, empty it. A small amount of ice on the walls of your freezer is acceptable. However, if there is enough ice to block away space for food, you may encounter difficulty. Defrost the refrigerator entirely, using glasses of warm water to speed up the process.

Wipe off the defrosted walls with vinegar and consider changing your fridge settings to reduce frost buildup in the long run. If the buildup occurs quickly (over a few days or weeks), you may need to have the entire defrost system serviced.

Confirm the fridge is on level.

Use a bubble level to test the top of the refrigerator from all four corners. If the fridge isn’t level, move the feet in or out until they are. This movement enhances food storage and cooling efficiency, preventing the door from swinging open or closing.

Be on the lookout for common problems.

Even when undertaking preventative maintenance, you should be alert for any issues. Numerous warning indicators indicate that your refrigerator is malfunctioning. Recognizing these early warning signs allows you to address a problem before it worsens.

These signs include:

Excessive condensation: Too much condensation indicates your refrigerator isn’t cooling correctly. If condensation accumulates in or around the fridge, call a repairman to keep your food from rotting.

Cold spots: Certain areas of the refrigerator may be colder than others. For example, the top shelf may be frozen while the bottom is warm, or vice versa. Cold spots in your refrigerator can ruin food or cause extra thawing during dinner preparation.

Food spoiling too quickly: Your food may decay considerably faster than the expiration date suggests. Fast spoiling indicates that your refrigerator is not maintaining the proper temperature to preserve and keep items fresh.

Overheating motor: Overheating from the engine indicates that the refrigerator is working harder than necessary. Excessive heat in the condenser might cost hundreds of dollars in electricity.

Excessive condensation: Too much condensation usually indicates that your refrigerator isn’t cooling correctly. If condensation accumulates in or around the fridge, call an experienced appliance repair Alexandria professional to keep your food from rotting.

The post The Ultimate Refrigerator Maintenance Checklist first appeared on HVAC Repair, appliance repair. The post appeared first on Express Appliance Repair

What Shortens The Life of a Refrigerator?

appliance repiar

Refrigerators are a household necessity, but they are quite expensive. They can cost a lot of money, depending on the refrigerator brand and features desired. Because the fridge costs a lot of money, it’s important to take proper care of it so it lasts as long as possible. A refrigerator’s usual lifespan is 10 to 15 years; however, according to refrigerator repair professionals, it can survive up to 20 years if properly maintained.

Knowing how you may be limiting the life of your fridge allows you to avoid bad behaviors and make your well-spent bucks go further. That’s why we’ve compiled this list of ways you could shorten the life of your refrigerator. These things include:

Failing to clean the fridge

Debris, foodstuff, sticky spills, and other frequent culinary mishaps that remain on the refrigerator door gasket for an extended period can tear or destroy the seals of your unit. This can result in a leak, enabling cool air to escape. You don’t want this.

To keep your fridge in good condition for as long as possible, wipe down the door edges on a regular basis. While you’re wiping down your fridge, check to see if you’ve properly organized it to keep ingredients fresh and prevent food diseases.

While you are at it, also remember to clean your fridge’s coils. For a great experience, make it a habit to clean them once a year. If you have pets, do it twice a year.

Remember that debris on the coils can prevent your refrigerator from effectively releasing heat, causing your compressor to work harder and longer than it was designed to. This increases the amount of energy used by your refrigerator and reduces its longevity.

Running the fridge full at all times

As much as you want to store as much food as possible in your fridge, you should be cautious when stockpiling and storing. While this is not a major issue with modern models, certain older versions have fan blades that are not as well shielded. In such a case, you can even see the fan blades in your freezer or refrigerator.

If you have an older unit, cramming your food into it and the freezer to the point of putting too much pressure on it can cause a break.

Ineffective refrigerators are often overworked, which tend to fail eventually. To avoid overfilling your fridge, perform a deep clean of the contents now and then and remove any debris that might be there. Not sure where to begin? Look for the things that you haven’t used in a while and get rid of them.

Running your unit in the wrong temperature

The incorrect freezer temperature might shorten the life of your ice maker and compromise the safety of the food you’ll be consuming. A temperature above 15 degrees Fahrenheit might potentially cause the defrost thermostat to fail, overloading your refrigerator and shortening its life.

You should make it a habit to check the temperature of the cooling system in your refrigerator and freezer on a regular basis.

The refrigerator’s internal temperature should be between -4 and 0℃. You should note that this temperature may vary from time to time, which is normal; however, you must ensure that it does not interfere with the refrigerator’s operation.

If you believe your refrigerator is not maintaining the proper temperature, you can reset the thermostat setting, which should resolve the issue.

If resetting it doesn’t solve the problem, you should contact a professional refrigerator repair service provider to help you out.

Failing to inspect the fridge

Most people will run their units without paying attention to them, which is wrong.

If your gasket does not seal properly, cold air might escape, causing the unit to work harder and consume more energy to maintain the desired temperature.

This is not only bad for your refrigerator, but it will also increase your energy bill. As a result, you must check for symptoms of wear and tear on an ongoing basis.

If you notice cracking or degrading sounds, you must replace them to avoid significant refrigerator issues. As part of your regular refrigerator maintenance practice, clean the gasket with warm, soapy water to prevent crumbs and spills from damaging the seal.

If you discover that your refrigerator is constantly running or is running louder than usual, take action immediately. Some repairs are simple enough for you to handle yourself or are inexpensive for a professional, but even if that’s not the case, letting a fridge work harder than it should is an excellent way to shorten its lifespan.

Depending on the age of your refrigerator, you may decide not to repair it and instead invest in a new, more energy- and cost-efficient model.

Failing to close the door after using the fridge

Your mother may have always had to yell if you failed to close the refrigerator door. As much as you might have hated it, she was correct. Keeping the fridge door closed is one of the most effective strategies to maintain proper fridge upkeep.

This is because the fridge has to work harder to maintain the proper temperature when the door is regularly opened.

To be safe, you should always consider what you need from the refrigerator before opening the door and take everything at once. When you’re finished, make sure to close the door tightly. This will keep the cold air from escaping from the refrigerator.

When you spend minutes on the fridge door deciding what you want, you should note that you allow hot air into the fridge, which causes it to work harder than it should. As you can guess, this causes the unit to have a shorter lifespan. You don’t want this, do you? So, always ensure that you keep your fridge door closed at all times.

As mentioned above, to minimize the amount of time you spend in the fridge, ensure that you know what you want before you head to the refrigerator.

Parting shot

These are some of the ways you are shortening the life of your fridge. To be on the safe side, take good care of your unit and be ultra-cautious about how you handle it. If you notice any issue with it, always move with haste and even consider hiring an appliance repair Springfield professional to fix any problems that might be too complex for you.

The post What Shortens The Life of a Refrigerator? first appeared on HVAC Repair, appliance repair. The post appeared first on Express Appliance Repair

How to Extend the Life of Your Fridge Last for as Long as Possible

Virginia Refrigerators Repair

Are you ruining your refrigerator without knowing it? To extend the longevity of your refrigerator, here are a few good things you should do as given by refrigerator repair professionals:

Ensure there is proper ventilation

Refrigerators work hard to keep food in cold, safe conditions. This intense work generates heat, which refrigerators must evacuate. Poor ventilation implies insufficient space surrounding the unit to dissipate the heat.

In addition to the limitation of space, dust and debris accumulating in the vents impede airflow. Over time, this prevents heat from escaping the fridge, affecting the internal temperature and causing the appliance to fail.

Keep the door closed at all times.

Refrigerator doors must remain closed at all times. It’s easy to lose track of time while standing in front of the shelves looking for items, but you should note that leaving the door open might harm the fridge in the long run.

The internal temperature rises when the refrigerator door is repeatedly left open, or the door gaskets fail to seal correctly. The quick temperature change requires the motor to work harder to maintain the ideal cool, food-safe temperature, leading it to overheat and eventually fail.

You don’t want this, do you? To keep your appliance in top working condition, you should always reduce the time you keep the door open. Before you open the door, you should know what you are looking to get from the fridge.

This way, you can go straight to the fridge and get the item without wasting too much time wondering what you wanted in the first place.

Properly clean the fridge.

Refrigerators, like any other device, require frequent cleaning, mainly when used in high volume. To ensure peak performance, you should thoroughly clean the device’s interior and exterior. Clean the exteriors thoroughly to prevent dirt and debris from gathering in the vents.

Leave the internal components to a skilled refrigerator technician. This is because trying to clean the interior yourself can cause drainage to the interior system, causing obstructions and leaks.

You should work with a professional who will properly clear the defrost line to prevent it from becoming clogged or freezing, as well as water leaking from the coils and gathering at the bottom of the unit.

Don’t neglect the coils.

The coils are one of the most critical components of a refrigerator. Simply said, they keep the fridge cold by eliminating heated air, resulting in chilly, food-safe temperatures.

When the coils become broken or clogged, they cease to operate effectively and, as a result, cannot maintain the desired interior temperature. This causes the unit to consume more power to compensate for the diminished function, shortening the lifespan of the coils and necessitating a premature and costly replacement.

To be on the safe side, also clean the coils. You should avoid cleaning the coils yourself as you will most likely cause damage, and you don’t want this. The right way to do it is to let an experienced professional do the work.

Remove torn gaskets

Simply closing the refrigerator door is insufficient; you must also consider how well it seals. Door gaskets and rubber seals that run along the door frame reinforce the seal and provide insulation to prevent warm air from entering the interior cabinet and raising the temperature.

The motor works harder to restore the appropriate temperature, increasing energy bills. You should regularly check the gaskets and replace any that are torn.

You can do the replacement yourself, but for the best outcome, let the work be handled by an experienced professional who knows what they are doing.

Run the fridge at the right temperature.

Setting the wrong temperature in your fridge means that your unit functions harder than it should, which increases its chances of breaking down. Keep your unit at the right temperature to ensure this doesn’t happen.

If your unit doesn’t have a thermometer, invest in one. To use the thermometer, dip it into a cup of water. Why? Your refrigerator measures the temperature of the air around your food, but you want to replicate the temperature of the food itself.

After 24 hours, check the thermometer and adjust the temperatures of your appliance accordingly.

Many freezers now feature a smart thermostat that automatically regulates the internal temperature to maintain food safety. If manual controls are provided, avoid setting the temperature too low to prevent the motor from overworking and maintain a comfortable atmosphere.

Too low temperatures can also cause food to freeze—even when it shouldn’t—and frost to collect inside the cabinet. Be ultra-cautious, read the handbook, and consult a skilled technician about the best settings you should go with.

Keep warm food out of the fridge.

Hot, freshly prepared food doesn’t belong in the refrigerator until it has cooled. While it is crucial to avoid leaving food out too long, keep track of the time and allow it to cool adequately.

You should note that placing hot food inside the refrigerator raises the interior temperature, affecting the quality of the other perishables. This also makes the device work harder to maintain the temperature.

The best way to go about it is to let the food cool completely before you place it in the fridge.

Defrost the fridge

Many freezers are now designed to self-regulate and defrost automatically. However, ensuring that the unit is defrosted regularly when in use for lengthy periods is still critical.

Frost is widespread in older refrigerators, accumulating over the inside coils and reducing the fridge’s efficiency when left alone.

Establish a regular defrost schedule for older refrigerators and ensure adequate thermal transfer between refrigerator components.

Parting shot

You should do these things to keep your fridge running efficiently and ensure it’s in proper working condition at all times. For the best outcome, ensure that the maintenance work is handled by an experienced appliance repair Fairfax professional who knows what they are doing.

The post How to Extend the Life of Your Fridge Last for as Long as Possible first appeared on HVAC Repair, appliance repair. The post appeared first on Express Appliance Repair

Tricks to Make Your Washing Machine More Effective

Where would people be without washers? In some families, these are used daily. Most people rely so heavily on them that it seems like the world’s end when the washing machine fails.

You don’t want your washing machine giving out on you in the middle of a cycle or failing to clean your laundry as well as you would want it, do you? To help you out, here are tricks given by washer repair professionals to ensure that your unit functions optimally at all times:

Descale the unit regularly

Descaling your machine regularly helps to prevent limescale buildup. To descale the machine, run a standard wash cycle with no laundry in the drum, substituting a large cup of distilled white vinegar or lemon juice for laundry detergent.

Alternatively, you can use a descaling solution. The frequency with which you must do this is determined by the hardness of the water in your location and the number of loads of laundry.

You should also use a water softener in each wash to prevent limescale from forming in the first place.

Clean your machine regularly

Cleaning your washing machine regularly is equally crucial as descaling. With each use, leftover detergent and softener remain in your machine.

If you go for a long time without cleaning your unit, you will start seeing suds at the end of the cycle. If not handled, these can accumulate and affect efficiency.

Worse, this promotes bacterial growth, resulting in musty odors. To help prevent this residue, you should clean your washing machine regularly.

Begin by running an empty service wash once per month. If one is unavailable, use a hot wash at 60 degrees or above. For the best outcome, clean your machine every three to six months to keep detergent buildup under control.

Don’t overwash your clothes

Many people are guilty of repeatedly overwashing their clothes. Recent research from Chalmers University of Technology discovered that when picking what to put in the laundry basket, many people are more likely to be motivated by disgust than by sustainability.

That means that people tend to wash far more garments than they should, which puts additional strain on the washing machine. It’s also bad for the environment, as excess detergent is consumed, and hundreds of thousands of microplastics are emitted per load.

The next time you throw something in the laundry basket, consider whether it needs to be washed. This way, you get to reduce the amount of washes you have to undertake over time, reducing wear on your machine.

Spread your load

Most people know not to overload their washing machines, but underloading can bring just as many issues. ‘When clothes become wet, they become heavier. Add a towel or two to balance the load if you’re washing a pillow or a small, single duvet.

You only need to ensure you do not exceed your machine’s maximum capacity.

It’s critical to do this because if your washing machine loses balance, it can begin to tremble violently as it prepares to spin. This reduces the unit’s efficiency and can damage both your floor and the machine itself.

Ensure your washer is balanced at all times

To keep your washer in good condition and ensure that it cleans your load well at all times, ensure it is balanced.

Most people know that overfilling the washer may cause the machine to become inefficient and imbalanced. This can also occur when there are too few items in the load.

Adding or removing a few items often solves the problem if the washer becomes unbalanced.

Use a washing machine-safe bag if you are washing items with strings or laces that could become stuck or twisted.

Use the right cycle or mode for the type of load you’re washing. Setting the washer to the “standard” cycle while cleaning many towels may cause the machine to be imbalanced.

Whenever you notice your machine being unstable, hurry, find out why this is the case, and fix it.

Remove clothes from the tub once you are done

You should not leave anything in the tub after washing your clothes. You should leave the door open to allow air to circulate the machine, keeping it dry, free of mold and germs, and extending its life.

Remove the garments as soon as possible so they don’t get stuck on something else or cause damage to your machine. If this happens and you cannot remove whatever is stuck, contact a professional immediately.

Don’t use hot water

Most people prefer hot water to wash their clothes. This is wrong. Most people don’t realize that hot water is bad for your washing machine’s health. When you routinely use hot water, you reduce its efficiency, and you have to get a new unit in no time.

To be safe, clean the washer using warm water instead of hot water. So, even when pre-soaking, always use lukewarm water.

Perform regular maintenance

Taking good care of your washing machine makes the unit more efficient and, at the same time, increases its lifespan by many years.

As a user, you can undertake routine cleaning or hire qualified appliance repair Springfield technicians who have the knowledge and expertise to inspect critical components such as the heater, motor, and pipes.

Maintaining your washer regularly will save you money on repairs and replacements by keeping it working like new year after year.

When you run a properly maintained unit, you not only get excellent cleaning results but also have peace of mind as you know there are fewer chances of your unit breaking down in the middle of a cleaning cycle.

The post Tricks to Make Your Washing Machine More Effective first appeared on HVAC Repair, appliance repair. The post appeared first on Express Appliance Repair

This website nor its owners are an actual service provider, this website is a referral service. When you place a phone call from this website, it will route you to a licensed, professional service provider that serves your area. This website may receive compensation for referrals. For more information refer to our terms of service.

© Appliancerepairnearme.cc

(877) 959-3534