Under the best of circumstances, having an appliance break down can be stressful. During these CoVid times, it’s liable to be even moreso.

Early on during the pandemic, people thought it might be a good idea to spend some money at home that they might otherwise have spent on travel or entertainment or dining out. That meant that there was a big run on major appliances. Many people suddenly found themselves spending much more time in their homes than they had before, because they were furloughed, or because they were transitioning to working from home, and because they no longer were able to visit the places they liked to go and spend time doing the things they liked to do. Some suddenly had fewer excuses not to get around to those projects they had promised to get around to, or began noticing and being bothered by things that previously they were able successfully to overlook.

All of that meant that there was a run on appliances, even as factories were crippled either by scarcity of parts or labor, or (in early days) even by logistical challenges. Naturally, if large numbers of people were suddenly embarking on home remodeling projects, or getting around to replacing balky appliances, or undertaking general home improvement with an eye to upgrading performance and efficiency. Those demands led to scarcity, and new appliance prices have climbed as availability has decreased.

In more normal times, it might be possible to limp along better with a poorly working appliance, but it has become more difficult, particularly for those who have to isolate due to vulnerability. It’s harder for them to get out to get a good look at what is available. And even if they have something new delivered and installed, viewing something online or in a catalog isn’t quite the same as inspecting it in person.

The upshot of all of these factors is that it has become more desirable to opt to fix appliances than it has been in the past, and the demand for service calls has been steadily increasing. The general rule of thumb was, for major appliances across the board, that if a repair cost half or less of what it would cost to replace an appliance, taking into account installation of the new one and removal of the old one, it probably was a good idea to repair, assuming that the appliance hadn’t had a major repair before and the efficiency and performance would still be relatively similar to something newer. That equation still works to some extent, but consumers find that availability is lower than usual and prices higher than usual, so many are opting to repair, instead.

Whether it’s a refrigerator, a washer or dryer, a water heater, a furnace, or a range, it’s challenging to find the usual range of options for replacement. Studies show that a larger portion of customers are satisfied with repairs performed by an independent appliance repair firm than with factory repairs, though obviously if your appliance is still under warranty, you will want to go that route. You need certified appliance repair technicians who have seen it all, and that’s just what you will find at Dave’s Appliance.

The knowledgeable technicians at Dave’s Appliance will be happy to consult with you and give you their best advice regarding your needs. They take every pandemic precaution on each home visit, and they come prepared. If it turns out to be in your best interest to replace an appliance, despite the challenges of the market, they will let you know, too, and they have the relationships with the best manufacturers to see that you get the best of what is available, should that be necessary.

Give the helpful people at Dave’s Appliance a call.

The post Appliance Breakdowns Can Be Stressful and Purchasing New Ones Can Be Costly appeared first on Dave's Appliance Service.

You are excited. You have found a new job in a different state or you built your house and you have to move from your current rental apartment. Among the things you have to move with is the washing machine.

Unfortunately, you can’t carry it with water—you have to drain the water. Since you don’t want to have any water remaining behind that might damage your other valuables, you have to properly drain the washing machine.

How do you do this?

Here is a guide given by washer repair experts on how to drain a washing machine for moving:

Step 1: Disconnect the machine from the power

Start with switching off the power button on the machine and unplug the machine from the power source. To avoid splashing the power cord with water, duct tape it to the top of the washing machine.

Step 2: Locate the drain hose and water supply hoses

If necessary, pull the washing machine away from the wall and access the drain hose. The drain hose is often located at the back of the washer, along with hot and cold water supply hoses. And it carries wastewater away from the machine while the hot and cold water supply hoses bring clean water to the machine.

To tell them apart, the hot hose is colour-coded red while the cold one is coded blue. The drain hose is often gray.

Step 3: Drain the washing machine

Depending on how the washing machine is installed, the drain hose might be carrying water into a standpipe, a drainpipe in the wall, or a large nearby utility sink.

To drain the washing machine, place a large bucket in place and disconnect the drain hose from the pipe by simply wigging it loose. You should then hold the hose up in the air to prevent water from flowing out until you place the bucket in place.

Once the bucket is in place, lower the end of the hose below the water level and gravity will cause the water to flow out.

If the water is too much that you have to pause to empty the bucket, simply place the disconnected end of the drain hose.

Step 4: Get rid of the drain hose blockage

If you find that the water doesn’t flow out or it drains too slowly, chances are you have a blockage in the drain hose. To unclog the drain hose, release the clog using a plumber’s snake. To do it, push the tip of the coil until it reaches a blockage, then turn it manually with the handles on the opposite end until you get through the blockage.

Step 5: Remove the clog in the drain pump

If the clog isn’t in the drain hose, chances are it’s in the drain pump. Depending on your machine, the drain pump might be located behind the removable panels in the front or back of the washing machine. It’s also not uncommon to find it at the bottom of the machine, and you have to tip the machine forward to access it.

After locating the pump, remove the spring clamps by squeezing them with a pair of pliers and clear any clogs present using needle-nosed pliers. The clogging material can range from small articles of clothing to a buildup of lint or pet hair.

Once you are done, reattach the hoses.

Step 6: Inspect the machine

You are better off fixing the washing machine before you move so that when you get to your new home, you will have time to enjoy it, not start looking for an appliance repair Fairfax to fix the machine.

Inspect the washing machine’s lid switch and confirm its working properly. All you need to do is to depress the lid switch by hand and if you don’t hear a click, its most likely broken and needs replacement.

You also should take a look at the belts and if they are damaged, unscrew the access pane and replace them.

You can do the work by yourself, but if the work is above your skill level, let a professional handle it. For best results, ensure the professional is experienced and certified to work in your local area.

The post How to Drain a Washing Machine for Moving first appeared on HVAC Repair, appliance repair. The post appeared first on Express Appliance Repair

Are you wondering, is it worth repairing a 15-year-old washing machine? Well, this depends on the broken part and the cost of repairing it. If the broken part is easy to find, so you can easily source it and not expensive to repair, it’s worth repairing the appliance, but if the part is hard to find and expensive to repair, you are better off getting a new appliance.

A good rule of thumb is to avoid repairing an appliance if the cost of repair is half the new unit’s price.

As you are making your decision, remember that most old appliances have fewer electronic widgets, so appliance repair professionals have an easy time repairing them.

While this is the case, there are situations when you shouldn’t even weigh your options and instead replace the appliance. These situations include:

Excessive leaking

A leaking washing machine comes about due to overflowing or a loose connection. If your appliance is old, it most likely uses the same amount of water for every size load. To minimize leaking, determine the load’s size that can fit in the washing machine and leave enough room for spinning, turning, and shaking.

If you do this and the appliance is still leaking, the water hose located at the back of the washing machine might be worn out or has come loose. Take a look at the hose and tighten it.

If you tighten it and the washer still leaks, you might be having a cracked tub. Tubs are expensive to replace, so you are better off buying a new appliance.

The appliance is making a lot of noise.

One of the most common washing machine noises is the appliance sounding as if it’s about to take a flight. If this is the case with your unit, you have nothing to worry about as the unit is simply unbalanced, and all you need to do is rearrange the clothes, so they are evenly distributed.

If the machine makes the noise even when empty, it means it’s sitting on an uneven surface. To fix the problem, position the washer in such a way all four feet are level.

If neither of these solves the problem, your motor mount or drum may need tightening. Contact your local appliance technician and find out how much it will cost you to do it. Depending on the amount charged, you will assess whether it’s wise to repair the unit or get a new one.

The appliance moves around.

A properly installed appliance should stay in place when cleaning, rinsing, and spinning your clothes. If your washing machine moves around that it looks as if it’s walking, you have a problem.

Begin with checking whether it’s level, and if it’s not, level it.

Even if your walking machine is functioning as well as a stationary one, you should know it’s not normal for a machine to move around. One of the issues that can come about is the appliance sloshing water outside the unit and ruining the floors and other parts of the house.

The walking machine also has high chances of pulling itself free of its connections, and it comes to an abrupt stop.

Ask an experienced professional to look into the problem, and if there is no way you can stop the appliance from walking, get a new one.

Water doesn’t fill the drum.

When your drum’s washer isn’t filling up, it means you have a delayed cycle selection, a problem with your hot and cold water faucets, and a kink in your hose. If you check all of the three and see no problem, your unit might be having a complication with the water intake valve or filter, and this needs to be looked at by a professional.

Sometimes the drum might fill with water, but it doesn’t turn as it should. If this is the case, take a look at the lid switch and belts and ensure they are working as well as they should.

Malfunctioning belts are easy to replace, but if the problem is with the lid switch, the washer repair Springfield professional needs to put in some work. Get a few quotes from different contractors and compare them. Is it worth fixing the lid switch issue or getting a new appliance? It’s up to you to make the decision.

The post Is It Worth Repairing a 15-Year-Old Washing Machine? first appeared on HVAC Repair, appliance repair. The post appeared first on Express Appliance Repair

Cleaning your refrigerator is important as it keeps it looking great and ensures it’s in top working condition all the time. While this is the case, the big question is, how do you clean your refrigerator? According to refrigerator repair professionals, proper refrigerator cleaning requires you to follow the right steps that include:

Step 1: Switch off the fridge.

If you can easily move the fridge and access the plug, turn off the circuit breaker serving the refrigerator. You should note that you don’t have to do this on all refrigerators. If your fridge has removable shelves and you are cautious about keeping the door closed while cleaning, leaving the fridge on makes no difference, but if your appliance doesn’t have removable shelves and you are going to have the doors open for long hours, unplug the fridge to avoid wasting electricity.

Step 2: Remove all the food.

The first thing to do is to remove all the food from the fridge. Toss any old or expired food into the trash. Remove the food that is still good and place it into a cooler to keep it cold while cleaning the remainder of the fridge.

Step 3: Remove the shelves and drawers

Does your fridge have removable drawers and shelves? Remove and set them aside. If you got any drawers and shelves made from metal or plastic, wash them with hot water and dish soap. For glass and ceramic pieces, gradually warm them up to room temperature before washing them with scalding water. This is to prevent them from cracking and breaking.

Step 4: Wipe down the interior

Using a clean cloth with hot water and mild dish soap, wash your fridge from top to bottom to prevent the water from dripping onto the surfaces you have already cleaned. If the insides have tough, stuck-on spills, use a plastic, non-abrasive scrubber to clean them.

If you got no scrubber, lay a warm wet cloth over the spilled area for a few minutes for the spilled area to get softer and easier to wipe away.

As you are cleaning the insides of the fridge, remember to clean the rags, so you don’t transfer dirt. Also, consider using multiple rags to maintain cleanliness. Once you are done with the insides of the fridge, pay attention to the interior doors.

Step 5: Clean the shelves and drawers

After removing the shelves and drawers, now it’s time to clean and dry them. Be cautious when cleaning, so you don’t break the slippery glass shelving.

Step 6: Dry the interior of the fridge

Once everything is clean and tidy, use a clean, dry cloth or towel. Wipe the interior of the refrigerator to ensure it’s completely dry. Remember to dry the interior walls as well.

Step 7: Replace the food.

Now, it’s time to put food back into the fridge. If you have jars or containers that you may need to store the food, now is a good time to clean them. Remember to use clean cloths when cleaning the jars and dry them thoroughly once you are done.

Step 8: Clean the freezer

Using the above-mentioned methods, clean the freezer. The cool thing with freezers is they often don’t get a lot of spills, so you don’t need to scrub them. You only need to check for and remove expired foods.

If there is some dirt or want to leave the freezers sparkling clean, go ahead and clean them.

Step 9: Clean the outside of the refrigerator.

Start cleaning the fridge from the top and work your way to the bottom using hot/warm water and mild dish soap. If you have a stainless steel fridge, use a soft, non-scratching rag and vinegar or window cleaner to clean the surfaces.

While at it, remember to clean the rubber gasket seal around the door edges using warm water and dish soap. By doing this, you remove dirt and grime that might have collected there, putting the seal at the risk of cracking.

Clean your fridge once a month

For an optimally functioning fridge, clean it at once every month. You don’t have to hire an appliance repair Fairfax professional to help you out, as you can do most of the work by yourself.

The post How Do You Clean Your Refrigerator? first appeared on HVAC Repair, appliance repair. The post appeared first on Express Appliance Repair

Having a self-cleaning feature of an
oven can seem like a huge bonus, but in some cases, they are more
trouble than they are worth. If you are not sure if you should be
using the self-cleaning option on your oven, we welcome you to check
out this advice from your local
appliance repair company. If you have questions or need
assistance, contact American Appliance Repair at 800-640-9934.

Understanding How the Self-Cleaning Cycle Works

First, let us cover how the
self-cleaning cycle even works. It raises the temperature within the
oven up to 1,000 degrees F. This burns away all food particles and
any debris. The temperature is kept this high for several hours, and
anything in the oven will be reduced to ash that can be simply wiped
out when the cycle is complete.

It is Effective but it Can Pose Risks

Yes, this is an effective way to clean
your oven. That said, anything you have temperatures that high and
food burning, there are potential risks. We suggest that if you are
going to use the self-cleaning option, you first lightly wipe out the
interior of your oven to get rid of any surface dirt. You should then
remain home during the entire cycle.

It is always wise to have a fire
extinguisher handy in the kitchen, but this is especially true when
you are using the self-cleaning option. Make sure your kitchen is
well-ventilated throughout the process.

The Self-Cleaning Function Can Cause Damage

It is also important to know that the
self-cleaning could actually damage your oven. The high self-cleaning
temperature can damage many American Appliance Repair at 800-640-9934 for fast service.

The post Should You Be Using the Self-Cleaning Option on Your Oven? appeared first on American Appliance Repair.

With so many cheaper and efficient dishwashers in the market, it’s normal to ask yourself, is it worth fixing a dishwasher when it breaks down?

The answer to this question isn’t a yes or a no, but more of a decision-making answer. To decide whether to fix or replace the appliance, you need to consider several things such as:

The amount charged by the service provider

When your appliance breaks down, you hire a dishwasher repair professional to fix it. Different professionals charge different rates depending on their experience, location, and nature of the problem.

To decide whether to fix the appliance, compare the contractor’s fee and the cost of a new appliance. Of course, you shouldn’t pay for a repair when the fees are higher than the cost of a new appliance.

The appliance repair market is full of unscrupulous contractors, so be cautious when comparing prices.

Don’t approach one contractor and think that is the amount charged by all contractors. Get quotes from 3 to 5 contractors from different locations, then compare them.

Avoid uptown based companies as they charge higher fees. The high fees aren’t because the contractors provide the best services, rather because they pay higher rents there.

If you do your comparison and find that the average price is higher or close to the price of a new appliance, simply get a new unit.

On the flip side, if you find the repair price lower than the machine’s price, fix the dishwasher. For best results, work with an experienced technician that understands what they are doing.

Age of the appliance

How long has the appliance been around? If your appliance is 8, 9, or 10 years, don’t bother fixing it—simply replace it.

The reason for this is because most of the modern appliances are designed to last for only 10 years. This means the closer your appliance is to 10 years, the better it is to replace it.

The problem the appliance has

Minor dishwasher problems are easy and cheap to fix, so it makes sense to fix your appliance if it has a minor problem. If your appliance is missing a seal, pressure switch, latch, drain pump, fill valve, or any other easy-to-find part, simply fix it.

On the other hand, if the appliance has a serious problem such as a malfunctioning motor or circulation pump, it’s more economical to replace the dishwasher as the cost of a new part and installing it will be much higher than the cost of a new dishwasher.

Warranty

If you have had your dishwasher for 1-2 years, you most likely have a warranty. This means when the appliance breaks down, you simply take it to a factory-authorized shop and have it fixed at no cost to you.

Due to this, it’s better to have the dishwasher fixed regardless of the problem’s nature. After all, the cost isn’t transferred to you.

If you never bothered with the warranty at the time of purchase or your appliance is old, you aren’t covered by the warranty, so you have to shoulder all the costs.

If the problem is minor, you can get money from your pocket and pay for it, but you are better off replacing the unit if the issue is complex.

Buying a new dishwasher

If you don’t have a warranty, your dishwasher is old, and/or the appliance has a complex problem, you shouldn’t bother with fixing it. Instead, buy a new one.

When buying a new appliance, take your time and ensure you buy the right one. One of the things to look at when buying is the efficiency rating of the unit.

Of course, you want a highly energy-efficient dishwasher that will consume little energy and function efficiently for a long time.

The price is another factor to consider. While expensive dishwashers function better and last for a long time, avoid the luxurious ones as they have too many features that you probably won’t need.

Go for moderately priced units within your budget.

After buying the appliance, take good care of it, so it lasts for a long time, and avoid hiring appliance repair Alexandria professionals now and then.

The post Is It Worth Fixing A Dishwasher When It Breaks Down? first appeared on HVAC Repair, appliance repair. The post appeared first on Express Appliance Repair

Any time an appliance starts to make
noises that it does not normally make, it is cause to worry. However,
not every surprising noise is a big deal. For example, if you have a
gas oven and it makes a hissing sound, it is just the gas releasing
that will be ignited.

The most concerning noises an oven can
generally make are rattling, scraping, buzzing, or grinding noises.
Learn the most common reasons for those noises and when you should
call your local
appliance repair company for oven
repairs.

You Might Have a Loose Impeller Fan

Convection ovens often make noises, and
in part, this is generally due to the way their impeller fans work.
These fans work to circulate hot air around the oven cavity, which
helps food cook faster. However, having these extra fans mean that
there can be extra problems. Warping in the fan blade can lead to
banging, or squeaking and squealing can occur if the spindle of the
fan is too dirty.

When the impeller fan is the issue, the
good news is that it is generally not actually a problem with the fan
– it just needs to be either cleaned or lubricated. Before you
start looking for replacements, make sure that it does not just need
to be cleaned.

Your Cooling Fan Might Be Faulty

If you do not have a convection oven
but are seeing and hearing the same symptoms as described above, it
could be an issue with an entirely different fan – the cooling fan.
Not all ovens have one, but these fans are designed to automatically
run when the oven is done being used in order to quickly cool it
down. If you hear screeching, grinding, or squeaking noise – but
only when you shut off the oven – it could be due to a dirty
cooling fan.

You Could Have a Loose Oven Panel

When a body panel is removed from an
oven and put back on, it might not be screwed on tightly enough, or
it could be that it was not flush. For both gas and electric ovens,
there will be small vibrations when the oven is working, but that
vibration could potentially cause the loose panel or screw to rattle
around.

If you have recently taken the door of
your oven off to make your own repair, and there is a rattling sound,
make sure that you have closely screwed in everything you took out.
If you have not recently made any repairs, then we recommend
contacting an appliance repair company to find out what your best
options are. Contact American Appliance Repair at 800-640-9934 for troubleshooting or a
repair appointment.

The post Discover the Most Common Reasons Your Oven Might Be Making Noises appeared first on American Appliance Repair.

Often at the bottom of most refrigerators, the compressor is the heart of the refrigerator’s operating system. The compressor compresses the refrigerant before sending it on to the condenser coil where it exchanges its heat with cool air.

Being an integral part of your fridge, you should pay close attention to it and fix it before the problem gets worse. How do you know if your refrigerator compressor is bad? There are plenty of things you can look out for as given by refrigerator repair professionals. These things include:

Fan stops

The compressor fan is necessary to cool the system and prevent overheating. When the fan stops working, it makes the fridge start making weird noises.

If you have noticed your fridge overheating or making funny noises, chances are the fan has stopped working and you might be having a compressor problem in your hands.

Don’t fix this problem on your own. Instead, hire a fridge technician or electrician that understands how to replace fans to do the work.

You can’t hear the compressor working.

If you are at home most of the time, you must have heard the compressor kicking on and off. This is characterized by a faint humming noise from the fridge, and when you hear the hum, you know the fridge is running.

If you have been in the house for the entire day and you haven’t heard the noise, chances are the compressor is bad.

Pull the fridge away from the wall and listen carefully. Can you hear the sounds of the motor running? If it’s all silent, the compressor isn’t working.

If you hear humming sounds, but the fridge’s food is warm, the compressor is functioning improperly, or you have another problem.

Failure of the fridge to cool enough

As mentioned above, failure of the fridge to cool enough is a clear telltale sign you have a problem with your compressor. Your compressor will also be faulty if some parts of the fridge are less cool than before.

To tell what is happening, test the compressor motor. To do it, you need to access the motor from the back of the fridge.

You can do the work by yourself but if you are scared due to a capacitor’s presence, let an experienced professional do the job.

Look at the relay switch.

If you aren’t afraid of doing some sleuthing on your own, you can access the relay switch and find out whether your compressor is faulty.

To access the switch, you need to remove the panel on the side of the compressor. The relay switch resembles a small ink cartridge both in size and shape and after getting hold of it, give it a bit of a shake and if it rattles, the switch is faulty, and you need to replace it.

If you shake the switch and there is no rattle, the switch has no problem, and the problem is most likely due to a bad compressor.

The compressor is making a lot of noise.

The compressor is usually silent, so if you have noticed yours making a lot of noise, it’s most likely faulty. Before you conclude that you should replace the compressor, you should note that the compressor handles the gas and pressure inside the fridge so the noise might be associated with the high pressure and bad gas maintenance.

If you aren’t experienced in handling these issues, it’s wise you hire a professional that knows what they are doing.

The fridge keeps tripping the circuit breaker.

If your fridge intermittently trips the circuit breaker when starting up, it means your compressor is bad or is beginning to fail.

It has been shown that the electric motor draws 5-6 times its operating current when starting up. As the compressor ages, it takes longer to reach operating speed which prolongs the inrush current that causes breakers to trip intermittently.

Compressor runs continuously

Your compressor is definitely faulty if it runs continuously without the freezer and refrigerator compartments reaching their proper operating temperatures.

You should note this problem can also be brought about by low refrigerant levels in the fridge or failing compressor valves. Let an appliance repair Fairfax professional look into the unit before making your decision.

The post How Do You Know If Your Refrigerator Compressor Is Bad? first appeared on HVAC Repair, appliance repair. The post appeared first on Express Appliance Repair

It’s a sultry afternoon and you can’t wait to cool down. You pour your favorite drink and run to the refrigerator ice maker for a few ice cubes. You get a few blocks in your drink and you have a refreshing ice icy beverage. You can’t imagine your life without an ice maker.

How long do refrigerator ice makers last? You wonder.

According to refrigerator ice maker repair professionals, the ice makers often last for as long as refrigerators (usually 10-15 years). You only need to take good care of them.

How do you maintain refrigerator ice makers?

There are plenty of ways to do it. The most common ones being:

Descale the ice makers

Although standalone ice makers produce more ice than ice makers inside a refrigerator, you still have to descale them as they also experience calcium deposits (also known as scale).

If you don’t remove the calcium deposits, you risk damaging the machine parts hence shortening the ice maker’s lifespan.

The cool thing is each refrigerator brand has a protocol on how you should go about descaling. Check your manual and you will find a guide on how to go about it.

Cleaning the ice maker

Ice makers turn water into frozen cubes so it may sound absurd that you have to clean them. After all they are in constant contact with water, right?

Remember, ice makers are like other food handling appliances. If you don’t clean them and you keep them running in unsanitary conditions, you will be promoting germ growth which is a health risk.

Keep your refrigerator ice maker in top shape by sanitizing it regularly (at least once a month). Unplug the fridge and empty both the freezer and the fresh food sections.

Proceed to wipe down or handwash the interior surfaces using mild soap and warm water. Don’t use abrasive tools or harsh chemicals when doing it.

Before you return the items, ensure every item is dry. You don’t want your ice maker to be a harbor for germs, do you?

When doing the cleaning, don’t focus on the inside only. Also pay attention to the outside to prevent dirt and stain buildup.

Now and then, you will need to remove dried spills with a damp cloth.

Change the filter

Even ice makers inside refrigerators have a water filtration system. Water passes through an activated charcoal filter that removes common tap water impurities such as chlorine.

With time the filters get dirty and you can’t make quality ice from dirty water. To continue producing good quality ice, clean or replace the filter.

A tell-tale sign it’s time to replace the filter is to monitor the smell and taste of the resulting ice. If you notice a change in either of the two qualities, it’s time for a new filter.

You can also tell when to replace the filter by checking the manual. It could be as frequently as 3 months, 6 months, or even a year depending on the brand.

Fix clogs as soon as they come about

Refrigerator ice makers are more prone to clogs than standalone ice makers. Due to regular use, it’s common for the ice dispenser chutes to jam often because of frozen ice melt and smashed ice particles.

The cool thing is it’s easy to fix this problem especially with newer models. All you need to do is to remove the ice bin along with stuck cubes. Then using a warm, damp cloth, clean the bottom of the bin and ice chute.

You should then dry everything thoroughly then replace the bin.

If you have an older refrigerator model, check the ice chute for blockages. If there is no problem, cubes in the bin might have fused together and to prevent this from happening, empty the ice bin.

Fix problems as soon as you notice them

A funny sound, an indicator light, or a weird smell might seem harmless but it can be a sign of a serious problem.

So to be safe, make it a habit to address any problem you see with seriousness. Don’t ignore any issue regardless of how minor it appears. When you notice a problem, get in touch with a refrigerator repair Alexandria professional to look into the problem and fix it.

The post How Long Do Refrigerator Ice Makers Last? first appeared on HVAC Repair, appliance repair. The post appeared first on Express Appliance Repair

Washing machines move a lot of water –
it is their job. Water goes into them, is moved around with great
force, and then rushes out the drain. When you think about it, it is
rather impressive that washing
machines don’t leak all the time. Of course, that doesn’t
make it any easier to handle a leak when you do have one.

If you are dealing with this problem,
the easiest and fastest way to get the right help is to contact an
appliance repair
company such as American Appliance Repair. You can call us at 800-640-9934 or keep
reading to learn about some of the troubleshooting fixes that might
help.

Take a Look at Your Laundry Detergent

If your washer is front-loading, and it
is leaking from either the back or underneath, then you might have
sudsy detergent. This is most common with soft water coupled with too
much soap, concentrated soap, or soap that is too strong for the
washer. You will know this is the issue by looking at the water that
is leaking. If you can see soap in it, then it is likely an issue
with the detergent.

Turn Off the Washing Machine’s Water Valves

If there is no soap in the water, then
the issue is likely something else. The next step is to turn off the
water valves. Go behind the washer and twist them clockwise (i.e., to
the right). If the handles and/or connections are both wet, or if one
of them is, then this could be the cause of the leak. If they are
dry, then twist them until they are firmly shut. This will stop water
from flowing, which can make it easier to troubleshoot and can reduce
damage.

If the valves are wet, consider how
wet. If there is a slow dribble from a loose connection, then this is
likely fairly easy to deal with. If the valve is so wet that it is
likely the source of the puddle-creating leak, then you might need to
replace the o-ring. You can also call American Appliance Repair for professional
help.

Check the Water Line Connections

If the issue is still not resolved,
then it is time to check the water lines. These run from the valves
to the back of your washer. Run your hand along each of the
connections to see if they are wet. If it is leaking, it will
generally drip from the lowest or outermost point of a bend. If the
yare both dry, check the point at which they connect to the washing
machine. If any of these are damp, identify where the dampness is
coming from.

If these troubleshooting options do not
fix the problem, then it is time to contact the professionals. You
can contact American Appliance Repair at 800-640-9934 now.

The post Try These Troubleshooting Fixes if Your Washing Machine is Leaking from the Back appeared first on American Appliance Repair.