Just like any other appliance, the ice maker develops problems. For the unit to continue working you have to hire a commercial appliances repair professional to fix it. There are many problems that can face your ice maker. The most common ones are:

Failure of the ice machine to make ice

This is probably the most common problem with an ice maker. The problem comes about when the water’s route is blocked or the solenoid fails to work. There are a number of things that you can do to fix the problem. One of the things is checking water supply line. Check the water supply and ensure that it isn’t kinked behind or beneath the refrigerator.

You should also take a look at the tap valve. This is a little device that connects the water supply of the ice maker to the water pipe. If it’s faulty, ask a commercial ice maker repairs professional to replace it.

Another area that you should look at is the electrical connection. Check whether the motor is working.

Other areas that you should pay attention to are: Shutoff arm, supply valve, water inlet switch, thermostat, water inlet valve, holding switch, ice mold heater, freezer temperature and ejector.

Ice maker makes ice cubes that are too small or too large

The most common cause of this problem is the cube size control. All you need to do is adjust the control to your preferred settings. In addition to this you also need to check the supply valve, water supply line, water inlet valve, and water inlet switch and ensure that they are working perfectly.

Ice machine fails to eject ice

I’m sure you have come across this. The ice machine makes good ice, but fails ejecting it. How frustrating is that? The most common cause of this problem is the motor assembly. If you have the skills, you should dismantle the motor and fix the problem. If that doesn’t fix the problem take a look at other areas of the ice maker. They include: holding switch, thermostat, ice mold heater and ejector gear.

Ejected ice has a bad taste

Bad tasting ice is common when you use dirty water or the ice bin is dirty. To fix the problem you need to wash the ice bin and remove any old food that might be in the fridge. You should also replace the refrigerator’s water filter. You can do the work or hire a commercial appliance services Arlington to help you out.

The post Commercial Appliances Repair : Putting A Lens On The Common Ice Maker Problems first appeared on HVAC Repair, appliance repair. The post appeared first on Express Appliance Repair

Studies have shown that dishwashers are four times more water efficient than hand washing, with the most water-efficient full-sized dishwasher using nearly ten times less water to wash the same quantity of dishes as hand cleaning.

While this is the case, you could spend more energy, time, and money washing your dishes when you improperly use your dishwasher. To help you out, here are some of the ways recommended by dishwasher repair professionals to use your dishwasher to save energy and money:

Don’t prewash the dishes.

This is an age-old mistake that many people continue to do. You should note that there is no need to rinse dishes into the dishwasher, no matter how dirty they are.

Apart from wasting water, rinsing plates beforehand will stop the dishwasher sensors from working correctly as they measure how much dirt is in the water after the initial cycle.

So, when there isn’t much dirt on the dishes, they won’t work hard, so they won’t properly clean your dishes. 

Dishwasher detergent tablets work best when there are food particles to allow them to do their work. This means that when you pre-rinse the dishes, the detergents don’t work properly, so they don’t clean the dishes as well as you would want them to. 

Instead of pre-rinsing the dishes, scrape the extra food particles and let the dishwasher do the rest. 

Load and unload the dishwasher correctly.

Overfilling and placing dishes in the wrong area or at an improper angle may prevent the dishwasher from washing your dishes effectively.

The best way to load your dishwasher is by placing large things like plates on the bottom tray, followed by cups and utensils on the top. 

You should separate items so there is space between them to allow the jets to wash. This includes separating the cutlery so the water can reach all areas.

You should make sure that nothing is preventing the spray arms from turning freely. Place the cups and bowls vertically so that the water can drain off properly, and they can dry.

The same way you need to load the dishwasher properly is how to unload it properly. 

Unload the dishwasher’s bottom rack first. The reason for this is that during a cleaning cycle, top rack cups and bowls can sometimes pool water.

This means moving them first will result in a spill and splash of water on the clean dishes below. And you don’t want this, do you?

Run the dishwasher when full.

Running a dishwasher with only a couple of dishes loses electricity and money in the same way that leaving your washing machine half full wastes energy and money.

Compared with hand-washing in the sink, dishwashers are highly water-efficient, but to get maximum efficiency, you should wait until the dishwasher is completely loaded.

This means you will be wasting energy and water by running it half-empty.

A full dishwasher will also have superior drying performance due to its higher thermal mass. 

Dishes are also more likely to smash and bump into one other when loads are partially full, increasing the danger of damage and breakage. So, always take your time and wait until you have enough dishes before you run a cleaning cycle. 

Use the right temperature.

Eco-mode exists for a reason—to save electricity. While you may be put off by the idea that it may take longer to wash your dishes in this setting, the fact that it pumps around more times means that less water needs to be heated, and your dishes will be washed for longer.

A standard dishwasher setting is usually between 55oC and 65oC, however, the lower eco temperature could consume 20% to 40% less energy. This helps you save money. 

If your appliance lacks the handy eco button, consider purchasing one that does.

Run a vinegar cycle.

At least once a month, fill a bowl with white vinegar and place it on the top rack of an empty dishwasher to run. The purpose of doing this is to give your dishwasher a refresh.

When you do this, it is like giving your dishwasher a spa treatment, as it will neutralize odors and break down grime.

When your dishwasher is clean, it not only properly cleans the dishes, but also runs efficiently, saving you energy. 

Leave the door open after use.

Your dishwasher, like your washing machine, has a moist atmosphere and fragile rubber door seals.

If you close the door tightly, your seals won’t get a chance to dry out, which promotes mold growth and foul odors.

After running a cycle, leave the dishwasher door open. This will expel any lingering moisture, which will help the machine last longer.

Don’t put everything in the dishwasher.

As much as you should run the dishwasher when full, it doesn’t mean that you should throw everything inside. 

As tempting as it is to throw everything in the dishwasher, some objects need to be dishwasher-compatible.

As a rule of thumb, don’t throw cast iron and nonstick pans in the dishwasher because it will remove the nonstick coating.

Also, don’t throw wooden spoons and chopping boards inside, as the hot water in the machine might break the wood and ruin the coating.

Placing plastic goods in a dishwasher, unless labeled “dishwasher safe,” isn’t wise, as the heat will melt them. 

If they are dishwasher safe, pop them on the top shelf only.

Also, don’t put sharp knives in the dishwasher as the dishwasher will gradually dull them.

Use the right detergents.

Some dishwasher detergents contain abrasives that quickly dull or wear away fragile glassware.

To stay on the safe side, commercial appliance repair Northern VA recommends that you use a detergent with a rinse aid to guarantee a thorough cleaning and drying.

Unlike hot air dryers, modern dishwashers dry with hot water. The rinse aid in the detergents allows the water to slide off the tub and dishes and down the drain. As a result, you don’t use too much water.

A tell-tale sign you use the wrong detergent is if you have spots on your glasses. If that’s the case, get a new detergent. 

The post How to Use a Dishwasher Correctly to Save Energy and Money first appeared on HVAC Repair, appliance repair. The post appeared first on Express Appliance Repair

A microwave oven is an important device to have in your workplace. Just like any other appliance, the microwave also develops problems that must be fixed for you to continue using it. To help you out, here are the common microwave oven problems and how to fix them:

Failure of the microwave to switch on

The first thing that you should do when this happens is to check the plug. Ensure that the plug is plugged in properly. Also ensure that the door is correctly closed and aligned. Also check the fuses and confirm if they have blown. Commercial microwave oven service providers recommend that you also check on the circuit breaker and ensure that it hasn’t tripped.

Microwave cooks unevenly or slowly

Check on the voltage at the power supply and if it’s more than 115 Volts, it’s the cause of the problem. If it’s less than 115 volts, the oven is faulty. A bad motor has also been shown to cause the problem. To take a look at the motor remove the grill at the bottom and check it using a voltmeter. If the reading is infinity, you should replace it.

Sparks inside the microwave

It’s common for grease and food stuck in the oven to create occasional sparks especially during the high-energy cycle. Commercial oven repair professional also report that a malfunctioning stirrer can cause sparks. To fix the problem you have to open the exterior panel of the unit in order to view the interior mechanical workings of the oven. If the stirrer’s belt is loose or doesn’t retain its tension, install a new one.

Mechanical problems in the oven

There are a number of mechanical problems that can come about in the oven. One of the common is burning of bulbs. To fix the problem refer to a manual and identify the exact location of the burnt bulb and fix it. If it doesn’t light, ask a commercial appliances service provider to come and take a look.

The microwave’s turntable can also fail to rotate. Built-up food debris often prevents the turntable from turning. The drive bushing may also have cracked. The problem is also common when the turntable motor fails. If you have the skills, go ahead and fix the problem, but if you have never repaired a microwave before, let commercial oven repairs Fairfax professionals handle it. For peace of mind, ensure that the professionals are certified and experienced enough.

The post Commercial Microwave Oven Repair: Common Microwave Oven Problems first appeared on HVAC Repair, appliance repair. The post appeared first on Express Appliance Repair

Appliances are a major investment; therefore when you buy them you want them to last as long as possible. According to commercial appliances repair professionals, there are a number of ways in which you can help your appliances last for long. Here are some of the ways:

Commercial refrigerators that last

If you have a refrigerator in your place of work you should take care of it. One of the major problems with refrigerators is doors. Due to the constant opening and closing the door seals wear out thus the refrigerator doesn’t cool food the way it’s supposed to. In addition to regularly cleaning the door seals also replace them when they wear out.

To improve air flow in the refrigerator, clean the refrigerator base grill. If your unit has a built-in ice/water dispenser, clean it too. Professionals recommend that you remove and clean drip tray every two or three months. Also clean the ice bucket assembly once a month. This is to prevent ice from picking up the refrigerator odors.

Washing machine that keeps on washing

There are a number of ways of to make your washing machine last longer. One of the ways is regularly cleaning or replacing air filters. These are units that trap water sediment before it enters the machine. By regularly cleaning and replacing air filters you prevent food particles, seeds, pits and other products from building up and getting trapped there resulting to inefficiency of the unit.

Another way of keeping the washing machine working efficiently for long is avoiding overloading them. Regardless of how fast you want to complete laundry, always ensure that you don’t exceed the recommended maximum.  You should also leave the washing machine door open after completing your load of laundry. This is to allow air to circulate in the washer and prevent mold and mildew from growing inside the unit.

Dryers that keep on drying

To keep the dryers in top performing levels, keep the exhaust vent clean. For ideal results, clean it at least once a year. You can clean it on your own or hire commercial appliance services Vienna. It’s also recommended that you regularly inspect the exterior vent and ensure that hot air is coming from it.

Conclusion

These are tips on how to make your appliances last for long. When any of the appliances develops a problem, hire a professional to come fix commercial appliance  as soon as possible.

The post Commercial Appliances Service: Golden Tips On How To Make Your Appliances Last Longer first appeared on HVAC Repair, appliance repair. The post appeared first on Express Appliance Repair

Without the fridge, you wouldn’t freeze quick and simple meals, wouldn’t be able to store perishable items for an extended period of time without canning, and would have to consume everything at once because you couldn’t save leftovers. This is a hard life, right?

All of these advantages will disappear if your refrigerator breaks down. To ensure this doesn’t happen, you should pay extra attention to how the fridge works.

When you do this, you can catch your fridge before it breaks down and schedule refrigerator repair service before it completely breaks down.

To catch your fridge, you’ll need to be alert for warning indications that your refrigerator is nearing its end and take prompt action when you see them.

Some of the signs you should look out for include:

The fridge failing to cool the food

The sole function of your refrigerator is to cool food items, so if it’s not doing that, you have a problem you should fix as soon as possible.

Feel the refrigerator’s internal temperature by putting your hand inside and waving it around a little. Opening a refrigerator door should feel immediately cold; if not, there may be an issue.

To determine how much cooling is occurring, try prodding the food or other items in your refrigerator.

A great item you can use is butter. If a stick of butter is not kept at the ideal cold temperature, it will soften rapidly.

If the fridge isn’t cooling as well as it should, contact a professional to fix it.

The food is getting spoilt.

Food is refrigerated only for long-term preservation. Any food in the refrigerator should last for at least a few days.

Of course, this depends much on what it is and how long you can keep it there.

If the food expires within a day of being placed in the refrigerator, it indicates that there may be one or more issues with the fridge.

While inadequate cooling is typically to blame, there are other possible reasons. In addition to insufficient cooling air, the fridge’s motor, door seal, or other components could be the source of the issue.

It just takes a slight temperature decrease to push your leftovers into the danger zone, even though the fridge appears cold and the motor appears to be working.

High condensation

There might occasionally be some condensation on the inside of the refrigerator due to the temperature difference between the inside and outside.

This is normal as long as it’s limited to the fridge’s solid surfaces, such as the shelves and compartment doors.

While this is the case, you should be concerned if you notice condensation on your food or outside the refrigerator door.

Only in temperature-contrasting situations, such as the windows of your car or house, should condensation occur.

Your refrigerator may have a breach in the body or door seal, allowing warmer air to enter if there is excessive condensation inside.

The same is true for the door’s exterior; if there is a gap in the door seal, cool air escapes and drips onto the door.

This condensation can cause the refrigerator to get wet on the inside and outside, and the motor will start overworking to compensate for the lost cooling, which could result in high power consumption.

To prevent this problem, have it checked by a professional and fixed immediately.

Excess frost

Despite popular belief, the freezer section of your refrigerator should be covered only partially in ice. Your freezer should be at a constant temperature that prevents water vapor from entering, known as a dry cold.

If you start to notice a lot of ice in your unit, it indicates that your freezer needs to be properly regulated.

You should keep your freezer at a constant temperature that prevents water vapor from entering, known as a dry cold.

Therefore, it indicates that your freezer needs to be properly regulated if you start noticing a lot of ice.

A malfunctioning freezer door seal or an issue with the refrigerator’s internal temperature control mechanism could cause this.

Food in your freezer risks freezing into an ice prison if it is icing over. It might not indicate impending danger, but it’s something to watch out for.

Depending on your fridge’s make, model, and year of manufacture, you can physically defrost it with an ice scraper or run an internal defrosting program.

Hot or loud motor

Your refrigerator’s motor does all of the cooling work. The motor drives the evaporator coils, which distribute the cool air that keeps everything nice and frosty. The motor in your refrigerator may get a little warm, like any motor, but this is normal.

The motor is most likely going to fail when it becomes scorching hot. The motor operates above its recommended capacity when it produces high heat, which might lead to unexpected shutdowns.

Your fridge’s motor can make weird, loud noises and be hot. The motor normally makes a quiet humming noise whether the door is open or closed.

If the noise becomes louder and begins to splutter, buzz, or hiss, it may indicate that the motor is being overworked.

Feel around the engine by reaching the rear of the refrigerator if you can. It’s on its last legs if it’s hot and/or making a lot of abrupt rumbling.

Hiring a repair professional

When hiring an appliance repair Springfield professional, ensure that the professional you hire is experienced and knows what they are doing.

The last thing you want is to hire someone who causes more problems than they are there.

While fixing a faulty appliance is good, sometimes it might not be a solution. If your unit is old, you should get a new one.

The post Signs Its Time to Hire a Refrigerator Repair Professional first appeared on HVAC Repair, appliance repair. The post appeared first on Express Appliance Repair

Just like any other appliance in your home a garbage disposal also develops problems. Here are some of the common garbage disposal problems and how to fix them:

Failure of the garbage disposal blades to churn up waste

This problem comes about due to premature dulling of the appliance blades. Dulling happens when you dump eggshells, avocado, nut shells and other items that shouldn’t be dumped in the disposal. To fix the problem hire a commercial garbage disposal service provider and ask him/her to replace the blades. Once you have the new blades, avoid dulling them by being cautious of the items that you dump there.

Garbage disposal clogging

Clogging happens when dumped products get stuck in the appliance. To unclog the unit, place a bucket under the drain and loosen the trap. You should then locate the clog and remove it. If you can’t find the clog, chances are that it’s in the drain pipe. The best tools to use to get rid of it is a snake or drain pipe. If you use the tools and still the clog won’t go away, hire a garbage disposal professional to help you out with the unclogging.

Leaking of the garbage disposal

If you find that your device is leaking it means that there is a hole that should be fixed. Start by taking a look at the screws on the drainage pipe and tighten them. Also check the bolts and ensure that they are also tight. Drain contractors recommend that you inspect your device and confirm if it requires more plumber’s putty. If the putty has come off replace it. If not enough add more at a section where the disposal meets the sink.

The garbage disposal stops working

A garbage disposal will stop working if it has been overloaded. To fix this problem reset the appliance. Most appliances have the reset button under them and all you need to do is locate and press it. If doing so doesn’t fix the problem, the problem could be related to faulty wiring or cord problems. If you don’t have wiring skills you shouldn’t touch the system—hire an experienced professional.

Conclusion

If you are used to having a garbage disposal you know that you can’t live without it. To avoid unwanted surprises hire a commercial garbage disposal maintenance professional to inspect the appliance and fix it for you. The professional will also help you replace any old parts.

The post Commercial Garbage Disposal Service: Taking A Look At The Common Garbage Disposal Problems first appeared on HVAC Repair, appliance repair. The post appeared first on Express Appliance Repair

A water heater is an integral part of your business. Whether you have a tankless, tank-type or solar type water heating system, the system will at one point develop problems. Here are common water heater problems and how to fix them:

Sediment build-up in the water tank

If you have a tank-type system you will often have this problem especially if you stay for long before you hiring a commercial appliances service provider to clean the system for you. There are a number of problems that come about due to excessive sediment build up. One of the problems is rotten egg smell in the water. This is awful as it reduces the chances of you getting repeat customers.

Excessive sediment build up also reduces the amount of water in the tank as the sediment takes up space.  Since most water heater burners are located at the bottom of the tank, debris buildup makes the water heater less effective thus water doesn’t heat as it should. To fix this problem you need to flush the tank to get rid of the excess sediment. You can do the work by yourself or hire a professional to do it for you.

Water heater temperature issues

If the water heater isn’t heating water well enough it could be because you haven’t set the thermostat correctly. Raise or lower the temperature a few degrees and the system will resume working effectively. If the water isn’t getting hot at all, the heating element could be spoilt and you have to replace it. The problem could also be as a result of a non-functioning thermocouple. If you have the necessary skills, you can fix the appliance or hire a professional to help you out.

Water tank noise problems

There is nothing as annoying as noisy water heater. Noise comes about when sediment build up in the tank comes into contact with the heating element. You hear noise when the heating element is burning the sediment away.  The water heater can also make noise when the heating element is on the verge of burning out.

Fixing this problem is easy as all you need to do is to flush the tank in order to get rid of the sediment. If you have already flushed the tank and still the tank makes noises, hire a water heater repair professional to replace the heating element. If you have the skills you can replace it yourself.

Conclusion

Sometimes the problems are due to old age of the appliance. If your water heater is more than 10 years old, it’s time to replace it as no repair work with fix the problems. All you need to do is to hire a commercial appliances repair Alexandria professional to do the work.

 

The post Water Heater Repair: Taking A Look At The Common Water Heater Problems And How To Fix Them first appeared on HVAC Repair, appliance repair. The post appeared first on Express Appliance Repair

In the heart of the kitchen, electric stoves stand as an essential tool for culinary creations. They provide the heat necessary to transform raw ingredients into delectable dishes, fostering warmth and comfort in our homes. However, when faced with a malfunctioning electric stove, many homeowners wonder: Is it your electric stove repairable? Let’s delve into the intricacies of electric stove repair to uncover the answers.

1. **Understanding Electric Stove Components**:
Electric stoves comprise several key components, including heating elements, controls, and wiring systems. Understanding the functionality of these parts is paramount in diagnosing and resolving issues with your appliance.

2. **Common Electric Stove Problems**:
Electric stoves are susceptible to a range of issues, from faulty heating elements to malfunctioning controls. Among the most common problems are uneven heating, unresponsive burners, and erratic temperature fluctuations. Identifying the root cause of these issues is the first step toward effective repair.

3. **DIY vs. Professional Repair**:
While some minor electric stove issues can be addressed through DIY troubleshooting and repairs, complex problems may require the expertise of a professional technician. Attempting to repair intricate electrical components without proper knowledge and tools can pose safety hazards and exacerbate the damage.

4. **Assessing Repair Costs**:
The cost of repairing an electric stove varies depending on the nature of the problem and the extent of the damage. Minor repairs such as replacing a faulty burner or recalibrating temperature controls may be relatively inexpensive. However, if the issue involves extensive wiring or control panel replacement, the repair costs could escalate significantly.

5. **Environmental Considerations**:
In an era marked by sustainability consciousness, the repairability of household appliances holds particular significance. Repairing an electric stove instead of replacing it reduces electronic waste and minimizes environmental impact. By extending the lifespan of your appliance through repair, you contribute to resource conservation and environmental stewardship.

6. **Factors Influencing Repairability**:
Several factors influence the repairability of electric stoves, including the availability of replacement parts, the age of the appliance, and technological advancements. Older models may be more challenging to repair due to discontinued parts or outdated technology. In contrast, newer models equipped with advanced features may offer greater repairability and compatibility with modern components.

7. **Professional Guidance and Maintenance**:
Consulting with qualified appliance repair professionals can provide valuable insights into the repairability of your electric stove. These experts possess the knowledge and experience to diagnose issues accurately and recommend appropriate repair solutions. Additionally, regular maintenance and servicing can help prevent potential problems and prolong the lifespan of your appliance.

In conclusion, the repairability of electric stoves hinges on a combination of factors, including the nature of the problem, repair costs, environmental considerations, and professional guidance. While some issues can be addressed through DIY troubleshooting, complex problems may necessitate professional intervention. By prioritizing repair over replacement, you not only save money but also contribute to sustainable practices and resource conservation in your household. Whether your electric stove requires minor repairs or comprehensive servicing, investing in its longevity ensures continued culinary delights and cherished memories in the heart of your home.

The post Is Your Electric Stove Repairable appeared first on Dave's Appliance Service.

When setting up a new restaurant, commercial kitchen equipment can cost you tens of thousands of dollars. When you are spending such amounts of money you need to take your time and buy the right appliance. Here are tips on how to buy the right commercial kitchen appliance:

Go for commercial-grade equipment

When buying kitchen equipment you can buy residential or commercial grade equipment. Since you are starting a commercial kitchen, you should only invest in commercial grade equipment.

In addition to the appliance being easy to clean, it rarely develops problems; therefore, you don’t have to keep on seeking commercial appliance services Fairfax. The appliances are designed to withstand the rigors of a commercial kitchen. This makes them last for a long time.

Buy new equipment

Many people starting new restaurants are usually strapped for cash. Due to this, most of them go for used kitchen equipment. While you save money by buying a used appliance, you end up spending plenty of money in the long run.

Since the appliances have been used before they constantly develop problems thus you are required to regularly hire a commercial kitchen appliance repair professional to fix them.

To avoid going through the trouble, you should invest in new appliances. While they will be costly at the beginning, they will save you plenty of money and time in the long run.

Functions

What can the kitchen appliance do? To save money, invest in an appliance that can do more than one task. If looking for a commercial refrigerator, go for one that can not only cool food, it should also provide you with ice. This saves you money that you would have spent buying a commercial ice maker.

Warranty

Warranties come in handy when the appliance starts developing problems even before the warranty period is over. When problems start developing, you should contact the company and they will ask you to return the appliance or send a commercial kitchen repair professional to fix the appliance for you.

Warranties vary from one company/brand to the other. If you are torn between brands carefully go through the warranties and understand what is covered and what isn’t in each brand. As rule of thumb go with the brand that covers the most features.

Before you leave, fill the warranty and return it to the company.

Conclusion

These are the main tips that you should consider when buying a commercial kitchen appliance. For the appliances to run effectively and for long hire a commercial kitchen appliance service provider to maintain them.

The post Commercial Kitchen Appliance Service: Tips On How To Buy The Right Commercial Kitchen Equipment first appeared on HVAC Repair, appliance repair. The post appeared first on Express Appliance Repair

Washing machines could not be simpler to use. Simply load your soiled clothing, add detergent, and start the machine. After a few hours, you’ll have clean and fresh laundry ready for clothes dryers.

While this is the case, things become more complicated if something prevents your washing machine from spinning. You end up with a sopping wet ball of clothes that you must either run through another separate spin cycle (after adjusting the load) or, if that fails, wring out and dry yourself, which is time-consuming.

A failed spin cycle can be inconvenient, and even the best washing machines can be affected. If this is a recurring issue for you, appliance repair professionals report that it can be brought about by several reasons causing your washing machine not to spin. Here are some of these reasons and tips on how to solve the problem once and for all.

Overloading the machine

It’s easy to get into the habit of cramming everything into your washing machine. After all, the fewer cycles you run, the more energy and water you save.

While this is correct, overloading your washing machine may cause the load to wash less efficiently because the garments will not agitate as quickly, and the detergent will not penetrate or apply itself evenly.

The solution is simple: don’t overload your washing machine. You can tell whether you’re doing it by how much you shove and stuff things in. Only fill it to make the best use of the available area and to ensure a complete and regulated spin cycle.

When loading the machine, remember that some cycles, such as the rapid wash setting, also have a limited capacity, so keep this in mind at all times.  

Unevenly loading the machine.

Depending on what you’re washing, you might not fill the machine but still create an uneven load. This is frequent when washing heavy objects such as pillows or tiny duvets.

Since these are saturated and weighed down during the wash cycle, any gaps in the drum become more noticeable.

The weight is thrown across the drum while the machine tries to gain speed to spin. In such cases, the sensors will normally kick in and prevent it from spinning for the abovementioned reasons.

To remedy the issue, you need to balance out the weight distribution. This can be accomplished by piling two pillows at once or padding the weight with towels. This will allow the machine to safely reach the appropriate spin speed without tossing itself around.

While this is an effective solution, ensure the bedding you’re washing is machine-safe. Certain pillows, such as memory foam, are not suited, and delicate bedding may require dry washing.

If you wash your pillows in the washing machine, completely dry them afterward, fluffing them frequently in a well-ventilated area.

Running an imbalanced machine

Another reason your washing machine isn’t spinning is because it’s not leveled properly. If the feet are not evenly balanced on the floor, the weight will be rotated in the drum, generating a lot of noise.

Leaning on the top of the appliance and moving your weight around will reveal whether this is the case. In the absence of that, a spirit level can assist in determining where the appliance is uneven. In such cases, the sensors will once again inhibit the spin cycle.

Adjust the feet to the proper height to level an uneven washing machine. To begin, unhook the appliance and carefully remove it from its location.

This allows you to inspect the floor’s condition; if it’s damaged in any manner, you’ll need to repair it. Depending on access, you may need to adjust the feet here, but otherwise, you may push it back into place with a helping hand and adjust it from there. 

The directions for adjusting the feet will be in the handbook, but the standard procedure is to loosen the lock nuts on each foot using a wrench and then rotate the required bolts to increase or decrease the height.

When satisfied, check the balance as you modify and tighten the nuts. This should resolve the issue, but if you need more confidence about adjusting the feet, you can always get a professional to help.

Using too much detergent

Many people have the impression that using too much detergent is harmless. Many believe it increases cleaning performance, but this is not true. Too much detergent makes rinsing garments more difficult, resulting in residual soap. This results in a “scrunchy” texture that is more likely to cause allergy reactions.

Clothes will also not agitate as effectively in the washing machine. You should remember that too many suds prevent a good wash by cushioning the clothes from rubbing against one another.

Too much detergent can cause issues with the spin cycle on front-loading washing machines. This is due to the fact that it produces excessive suds, which confuse the sensors if not thoroughly washed away.

The washing machine will believe it is fuller than it is, affecting the spin cycle speed. It may even pause to remove the suds, resulting in delays or problems. At best, this results in a less efficient spin cycle and clothing that is too moist and soapy.

To stay safe, use a suitable HE (high efficiency) washing detergent to avoid this issue. Such detergents will not produce excessive suds but follow the dosage instructions.

Damaged drive belt

The drive belt in your washing machine is what rotates the drum. So, if it’s stopped spinning, there could also be an issue here. By manually turning the empty drum of your washing machine, you may examine the condition of the drive belt. If it spins smoothly with little effort, the drive belt has likely been misplaced or snapped entirely.

Check the drive belt on some machines by unplugging the machine and removing the front or rear panel – your manual should provide instructions. You should be able to see if it’s come loose or broken and has to be replaced.

In either case, you should get the help of a washer repair Fairfax professional to handle the replacement. Some machines may need to be propped up or even flipped over to gain access to this part, which can be dangerous, and you must use the correct part for the exact model and fit it correctly, which a professional can assist with.

The post Reasons Your Washing Machine Won’t Spin and What to Do About It first appeared on HVAC Repair, appliance repair. The post appeared first on Express Appliance Repair