Want to Do Some DIY Appliance Repair? Here Are a Few Tips…

When a household appliance malfunctions, you can either reach out to a local technician or choose to repair the appliance yourself. Though most homeowners are not qualified to perform major repairs, the following DIY appliance repair and maintenance techniques can save you a few dollars.

Cleaning Refrigerator Coils

You can increase your fridge’s function by regularly cleaning its coils. Clogged coils not only raise your energy bills but also shorten the compressors’ lifespan. Ideally, you should clean your refrigerator coils every year, but you can increase the frequency if your fridge is exposed to too much dust or grease.

Depending on the type of your fridge, you need to either detach the grill at the bottom or roll your fridge out from the wall to access the coils. Use a soft, bendable brush and a vacuum to thoroughly clean the coils, including the hard to reach places.

Replacing or cleaning HVAC filters

Statistics show that replacing or cleaning a clogged air filter can minimize your unit’s energy consumption by up to 15%. Some filter types are reusable, while others need to be replaced. To clean or replace your air conditioner’s filters, turn off your unit and locate the service panel. Remove the air filters from beneath the service panel. If you have reusable filters, clean them with running water and make sure your reusable filters are completely dry before reinserting them. Insert the new (or cleaned) filter back into the service panel.

Keeping Your Stove Grease-Free

When cooking oil reaches boiling point, it emits a flammable vapor. Therefore, when that oil is left to solidify, not only is the resulting grease accumulation messy and unsightly, but it can become a danger as well, particularly for gas stoves. Clean your stovetop regularly by spreading baking soda across it. Then spritz it with vinegar. Let it sit about 15-30 minutes. After letting the cleaning solution sit, scrub it and wipe it clean with a wet rag. Make sure that when you are cleaning a gas range, that you also thoroughly clean the burner and remove any grease build-up from the gas ports (where the flame comes out). You should also regularly have the stove vents professionally cleaned, as grease vapors can accumulate there.

Before commencing with your DIY repair project, check whether your appliance’s warranty will be compromised. Most manufacturers void a warranty if an appliance is opened by an unauthorized person or one without a license. Ensure you are safe by first disconnecting the appliance from the power source. Never try to move a heavy appliance by yourself as this might hurt you or cause further damage to it.

If you have an appliance that isn’t operating smoothly and you’d like some professional help, give us a call at 505-835-1927 and we’ll get it running efficiently right away.

The post 3 Tips for DIY Appliance Repair appeared first on Appliance Repair New Mexico.

Modern refrigerators are engineered to last for more than a decade. However, even the best units will require servicing at some point. Here are five signs you need fridge repair:

1. Water on the Floor

When dealing with a leaky refrigerator, don’t be surprised to discover puddles on the floor. This is a problem that needs to be fixed as soon as possible. You definitely don’t want any water damage to occur. The cause of the leaking can stem from a few different issues, including a worn door seal and a clogged drain tube.

2. Spoiled Food

Prematurely spoiled food is one of the most obvious signs a fridge repair is necessary. Although you may need to simply adjust the thermostat, your refrigerator more likely has a mechanical problem. In order to prevent spoiling, the food needs to be kept at a temperature of around 40 °F. To prevent wasting money, have the refrigerator inspected by a local licensed professional.

3. Strange Noises

Refrigerators naturally have a low hum. However, take notice of any strange noises. If you start to hear a tapping or growling sound, this indicates the need for fridge repair. A defective blower motor is a common cause of loud chatter. Failing to act will only lead to an even bigger headache. You want to prevent the blower motor from completely burning out.

4. Mold and Mildew

The presence of mold and mildew is a bad sign. Not only does mold cause your refrigerator to have a bad odor, but it can also trigger allergy symptoms. Contrary to common belief, mold isn’t just caused by expired food. If the rubber seals around the doors aren’t in good condition, mildew will creep inside the refrigerator.

5. Increased Energy Consumption

Many people tend to blame their higher electrical bills on other home appliances, especially the air conditioner. However, a poorly performing refrigerator can also drain more energy. If you happen to notice other signs like odd noises and warmer temperatures, there’s an even greater chance your refrigerator is the culprit. While your refrigerator may seem to be on its last leg, simple repairs can give it a new life. Routine refrigerator maintenance, such as cleaning the condenser coils, will save you even more money in the long run.

Have you noticed any of these issues? Reach out to Dave’s Appliance Service as soon as you can by calling (262) 253-2200. We will let you know what to expect and how you should proceed. Ask us about our repair specials. Senior Discount: Seniors ALWAYS receive $13 off any repair service.

 

 Picture by Ian E. Abbott is licensed under CC BY-NC-SA 2.0 

The post Be Aware of the Signs Your Refrigerator Might Need a Repair appeared first on Dave's Appliance Service.

The washing machine is one of modern society’s greatest conveniences. It’s an appliance that you probably take for granted until it fails to work one day. Getting a long life from your washing machine is easy. Your washing machine has several components that must work together seamlessly, and those parts will eventually wear out or stop working properly if regular maintenance isn’t done on the machine. Here are six warning signs that your washing machine needs repairs:

#1 Drum Doesn’t Fill with Water

No, your washing machine didn’t turn into a high-efficiency (HE) appliance since your last load of laundry. Although HE washers are designed to use less water than regular washing machines, your conventional washing machine’s drum must have an adequate amount of water to thoroughly clean your clothes. A washer that has a blockage will have no water or a low amount of water in its drum. A reputable washer repair technician has the tools and skills to inspect, clean, and fix washer hoses, pipes, and filters.

#2 Water Remains in the Drum

A lack of drainage is another issue that signals the need for a professional service call. When your washer finishes its wash and rinse cycles, the machine automatically drains the water from the drum. A washer that doesn’t do this may be sending you a cry for help. Your washer could have a blocked hose or pipe that prevents the water from leaving the drum at a normal rate. It could also have a damaged pump.

#3 Drum Doesn’t Move to Agitate Clothes

A stationary drum means that your dirty laundry isn’t going anywhere until you haul it off to the laundromat. Worn components such as belts, switches, clutch, and sensors are often to blame for washing machines that won’t spin.

#4 Machine Makes Loud Noises

A noisy washing machine is not uncommon, but it’s a signal that you should get the appliance checked by a service professional. Washing machine noises can be caused by an unbalanced machine. By redistributing your clothes within the machine and making sure that the appliance is on a level surface, you can stop some washer noises. If the noise persists, you may have a problem with your motor mount or drum. A certified repair technician will know how to find and fix the problem quickly and effectively.

#5 Washer Leaks Water

A washer that leaks water can cause damage to floors and promote mold growth in your home. This problem is usually caused by a worn hose or a loose water connection. Getting a washing machine service professional to inspect the appliance’s components periodically can help you to avoid the inconvenience of a leaky washing machine.

#6 Clothes Remain Wet After Completion of Wash and Spin Cycles

The ability to wring excess water from clothing after completing wash and rinse cycles is a key feature of today’s washing machines. If your washer’s spin feature isn’t working properly, you’ll have to spend extra energy drying your soggy clothes. Technicians fix this problem by checking washing machines for damaged motor couplers, clutches, and belts.

Final Words

While some washing machine problems such as an electronic control panel that won’t power on are obvious, the listed warning signs are often ignored by users as nuisances that will go away during the next wash cycle. By postponing washing machine repair work, you risk making a small problem more serious. When you call Dave’s Appliance Service at (262) 253-2200 to repair your washer, you get fast, affordable service that gets you back to living a normal life. The family-owned appliance service shop also offers same-day repairs to its customers in the Metro Milwaukee area.

Ask us about our repair specials. Senior Discount: Seniors ALWAYS receive $13 off any repair service.

The post Ignore These 6 Washing Machine Repair Warning Signs and You’ll Be at the Laundromat appeared first on Dave's Appliance Service.

We all rely heavily on the appliances in our homes. They add productivity and comfort to our lives, and we can hardly do without many of them. Unfortunately, many homeowners take their appliances for granted. They don’t give them much thought at all until they break. Repairs after major appliance failure can be costly, and many times they can be prevented entirely. Performing regular maintenance on your appliances is important. Here are a few reasons why:

Efficiency

Appliances that aren’t well maintained tend to work harder than they need to, burning more electricity or gas. A refrigerator that likes to stay cracked open burns way too much energy trying to maintain the internal temperature. A dryer with a dirty filter or a partially clogged exhaust vent is a dual problem: first, it doesn’t dry your clothes as well, but second, and more importantly, it’s a huge fire hazard. You end up running the dryer longer to get your clothes dry. This burns unnecessary energy and adds to your utility bills.

Appliance Lifespan

Maintaining your appliances helps them live longer. Not only do unmaintained appliances burn too much energy, but they also burn themselves out faster. Your blocked-up dryer works harder and hotter than it’s supposed to, which often leads to early failure. You should regularly follow the maintenance procedures printed in your appliances’ owner’s manuals. Doing so will keep them running well for longer.

Property Safety

Maintaining appliances helps keep your home and property safe. A dishwasher that’s not draining well can flood your kitchen. A refrigerator that’s running too warm can sicken your entire family. A dryer with a blocked vent can literally burn your house to the ground! FEMA says dryer fires cause $35 million in property loss every year! Maintain your appliances well to reduce the risk of appliance-related property damage.

Conclusion

These are just a few of the reasons that regular appliance maintenance is important in your home. Here at Sarah’s Appliance Repair, we can also help with maintenance as well as appliance repairs. We save you money by helping you avoid expensive replacements for your appliances. Need help with your appliance maintenance? Give us a call today at 505-835-1927!

The post The Importance of Regular Appliance Maintenance appeared first on Appliance Repair New Mexico.

Your household appliances are essential to your life. You rely on them to prepare meals, preserve food, heat water, and launder your clothes. Appliances make life easier. When a key appliance such as your stove, oven, refrigerator, dishwasher, or washing machine stop working, it can throw you off. You will want to fix the problem as fast as possible. Instead of trying to repair your appliance yourself, here are reasons to call in an expert for appliance repair:

Safety

Appliances have multiple moving parts and are very complex. These features combined with electricity can make attempting a do-it-yourself repair very dangerous. According to the U.S. Consumer Product Safety Commission, large appliances resulted in 18% of all consumer electrocution deaths from 2010 to 2013. During that same time period, small appliances resulted in 12% of the reported electrocution deaths. The CPSC reports that a majority of the electrocution deaths from appliances occurred when people were trying to repair their appliances themselves. If you attempt appliance repair on your own, you could start a fire or suffer an electrical injury. A professional has the training and certification necessary to troubleshoot what is wrong and to fix your appliance in a safe manner.

Maintaining your warranty and insurance coverage

The warranties on your appliances will only cover defects during the manufacturing process. If you also have insurance for your appliances, it will not cover any damage that is caused by you. If one of your appliances stops working correctly, and you attempt to fix it yourself, you might void the warranty and your insurance coverage. If your appliance breaks down in the future, this can leave you without a remedy and you will still have to pay for a new appliance. When you hire a professional to repair your appliance, the insurance provider or warranty will cover the cost of the repair. Companies only cover repair costs when the work is completed by a certified professional.

Cost savings

Many people decide to attempt their own appliance repair because they want to save money. However, do-it-yourself repairs often cost more money instead of less. If you do not have the proper equipment and training, you can cause additional damage to your appliance. Damage that you cause can require more expensive repairs. It could also force you to purchase a new appliance to replace the one that you damaged. Why not hire a professional appliance repair person in Menomonee Falls from the start? Then you would avoid causing damage that could cost you more money.

Time savings

If your refrigerator or freezer stops working, time is of the essence. You will want to call an appliance repair person to come to your home as soon as possible. An expert repair person may be able to access parts that are needed quickly and to repair your appliance much faster. If instead you try to fix your appliance yourself, your food may spoil while you spend hours trying to fix whatever is wrong with it.

Contact Dave’s Appliance for help

If your appliance is malfunctioning or has stopped working, it is important to get help from a professional appliance repair person. Menomonee Falls based Dave’s Appliance Service has helped people in the greater Milwaukee area since 1963 to repair their appliances quickly. We repair all major brands of appliances. We are a recipient of the Angie’s List Super Service Award, so you know you’ll get great service! Contact us today to extend the life of your appliance by calling (262) 253-2200.

Ask us about our repair specials. Senior Discount: Seniors ALWAYS receive $13 off any appliance repair service in Menomonee Falls and throughout our service area.

The post Why Hire a Repairman for Your Home Appliance? appeared first on Dave's Appliance Service.

As days are going by, people are getting more reliable on the dishwasher. The dependency arises due to its multiple striking qualities. Using it saves your time as well as physical effort. If you have huge dishes in your home to wash because of a party, you have thrown, the dishwasher will be your ultimate savior.

You will be able to give more time to the guests than passing a boring time washing the dishes. But what will happen if your dishwasher is not working properly and you are facing some problems in it? You will feel that your whole world just fell apart. Don’t get disheartened in this situation as there are solutions for every problem. Hiring an engineer for every problem will be time-consuming as well as expensive. If you understand the source of the problems, you will be able to find the solutions successfully by yourself.

It is best for you if you gain knowledge about the problems and solutions in order to avoid any kind of damages on the machine. Following the article, you will get to know the common dishwasher problems and the way to overcome this.
Read on to find out more.

The dishes are not Cleaned Properly

This is a common problem that will probably piss you off the time you will see your dishes not getting cleaned properly. The dirt in the dishes might trigger your anger to a point that you might physically harm the machine as well as yourself. Please don’t do that. This will simply add up to your already existed problem. To find out the problem, start by checking the number of dishes you are putting into the dishwasher. If you are overloading the machine with dishes, all of the dishes won’t be washed properly. If you are confident about the loading of the dishes properly, increase the washing cycle at a higher temperature.

This is a good step to take. If you are still facing the problem, try using a washing detergent that is strong enough to remove the dirt. In addition to that, check the machine for any malfunctions. Check the spray arms about its movement and efficiency. If it is covered with dirt, gently remove the arm and clean it with a fresh cloth and toothbrush.

Water leakage from the dishwasher

This problem will flood your kitchen if it is not solved instantly. Check the door and the door gasket of the dishwasher. You might find some amount of dirt, preventing the door from closing properly or might find any cracks where the leakages are happening. For the dirt, you have to scrub it off gently with a cleaning solution for dishwasher and for the cracks, you have to replace the whole door gasket.

The dishes are still wet in some areas

This is a clear indication that the dishes are not getting dried properly. There can be various reasons behind this. If you are loading your dishes unevenly and not in a proper way, there will still be some wet areas left. To avoid this, load the dishes in a proper way so that the heat generated by the heating element can reach the dishes in every area possible in order to dry it properly. If it is not the problem in your case, check the amount of rinse aid you are applying. Apply it for a couple of times so that all of the water can easily be evaporated. The problem can also arise from the malfunction of the heating element.

The heating element is very crucial as it mainly controls the temperature and the proper way to spread the heat among the dishes evenly. The element can be seen at the bottom of the tub. You can check it by yourself to find any malfunction and damages. If you manage to the electrical malfunction that is out of your knowledge, contact an electrician. You will harm yourself if you try to fix it without having the knowledge of the solution.

Appliance Repair Service Near Me

Go to the Google website and type ‘appliance repair service near me’. If you are unable to find a dishwasher repair service by typing that, try typing ‘washer repair near me’. Various repair service will pop out in your location and you can choose any of them according to your desire. If you are living in the USA, you are obviously familiar with the fact that the business city is Huntsville, AL as the environment is very business friendly. If you are staying in that location, expect to get multiple washers to repair services with good reviews from customers.

Bad odor from your dishwasher

The problem is very disgusting to experience. Your whole kitchen might smell bad due to the bad odor present in the dishwasher. The smell is the cause of foods that got stuck in the dishwasher for a long period of time. Search the whole machine thoroughly for any foods that got stuck and clean them gently. Check the screen of the dishwasher which can be seen at the bottom of the machine. If you find foods in that place, don’t waste any time and wipe it off as soon as possible.

Dishwasher not turning on

This problem is an electrical one and should be handled carefully. Check the switch and the power box for any malfunctions. Don’t forget to check the wires and plugs. If the doors aren’t closed properly, the machine won’t work. So, make sure it is done. Sometimes the machine turns on and off continuously. This problem should arise from the motor. Spin the motor with your hand to find any blockages. If possible, clean the motor along with that. As mentioned already that it is an electrical problem, shut the power off when you are fixing the problem. Don’t get an electrical shock along the process.

Drainage system not working properly

If this happens, you will see some amount of water that hasn’t been drained at the bottom of the dishwasher. This arises mainly from the washing cycle. Every cycle adds up some amount of water at the bottom which can turn out to be a massive problem if not drained as soon as possible. The problem can arise from the filtering portion in the machine. The filters can be filled with dirts and debris to an extent that the waters are getting blocked while draining.

These can be found at the bottom of the machine and the filters should be cleaned on a daily basis. Another problem can arise from the drain hose. This can also create the same problem due to the dirt’s getting jammed in it. To solve it, remove the hose from the dishwasher and blow it gently to remove the dirt.

Conclusion

Read the article for a couple of times for your benefit. These are the common problems that every dishwasher user faces and if you can solve it successfully, you will gain the confidence to solve any kind of dishwasher problems in the future.
Best of luck.

The post Common Dishwasher Problems [#6 Proven Solution 2019] appeared first on Appliance Masters Repair Service.

Springtime is an excellent time to clean your whole home. With fresh air blowing through your windows, you have an excellent opportunity to get rid of odors, dust and dirt that may have built up on your rugs, upholstery, hardwood floors and furniture. In addition, be sure to take your cleaning to the next level by including your home appliances on your spring cleaning checklist.

Cleaning Your Dishwasher

Your dishwasher is probably filled with bits of food as well as hard water deposits from frequent use. Thoroughly clean the screens and filters on the bottom of the dishwasher and also wipe down the sprayer arms. You may even want to use a shop vac to get rid of food debris. For very difficult-to-remove lime or calcium deposits, consider cleaning with a commercial cleanser, such as CLR or Lime-Away.

Cleaning Your Refrigerator

Little spills of food and drink in your refrigerator can add up to one huge mess by the springtime. Wipe down all of the shelves with a warm, wet microfiber cloth, and clean around the door seal as well. Be sure to pull your refrigerator out to clean the coils on the back. If your refrigerator has not been effectively cooling your food lately, be sure to schedule refrigerator repair . This is also the perfect time to change your refrigerator’s water filter.

Cleaning Your Oven

Most modern ovens come with self-cleaning options that make spring cleaning super simple. Once the cycle is complete and the oven has cooled, simply wipe out the ashes. Be sure to clean your stove top as well as around all of the knobs. If you have a glass-top stove, gentle cleansing products will be your best friends. However, if you have a traditional electric or glass stovetop, you will need to remove the burners and scour around them.

Cleaning Your Washing Machine

With a name like “washing machine,” you might think that this appliance needs little help from you to stay clean all year long. However, the gasket and drum can become quite dirty and filled with gunk especially if you have hard water. Use white vinegar in place of your regular detergent on an empty load cycle. Then wipe around the gasket and door seals with a cloth soaked in white vinegar. Also see this helpful tip: How to Remove Mildew Odor from your Front Load Washer. If you are having persistent problems with your washing machine not getting your clothes as clean as it once did, you may need appliance repair in Menomonee Falls.

Cleaning Your Clothes Dryer

While the inside of your dryer should stay relatively clean, the dryer’s vent may not be so spic and span. Take out the removable vent in your dryer and vacuum it and around it as well as possible. You should also clean the long dryer hose that vents outside to get rid of lint that could eventually become a fire hazard.

While spring is a great time to clean your home’s appliances, it is also a key time for you to take note of any issues that you may be having with them.

Image from PIXNIO

The post Add Your Home Appliances to Your Spring Cleaning Checklist appeared first on Dave’s Appliance Service.

Refrigerators had made life so much easier than it was back when they did not exist, and today it is the most essential and used appliance in our life. While everything beneficial comes with its problems, refrigerators have similar difficulties to deal with besides its sound effects.

With a refrigerator not working correctly, it may lead to all the stored food to spoil and waste. Most of the times, to recover from such problems refrigerator repair near me are quite useful.

But if you can deal with them at home and get your problems solved in minutes by yourself, the job gets much more comfortable. So it is always better to be acquainted with some handy skills while dealing with a refrigerator.

Common problems:

1. Continuous water leakage
2. Strange noises from the refrigerator
3. Temperature not cold enough
4. Freezing of food at the bottom part
5. Ice building up inside the fridge

Most of these problems occur due to carelessness while handling the fridge and can be prevented with adequate care. A few tips can always come in handy while repairing your refrigerator at home.

Solving your refrigerator problems:

1. Continuous water leakage:

A refrigerator leaks water when the water supply line freezes and splashes water continuously. It can also leak when the drain hose gets clogged with food particles, vegetable leaves, and other litters and scraps.

The clogged hose leads to a blocked defrost drain eventually causing water dribbling from the drain. In such a case, the problem can be fixed by using a tub of warm water to clear the blocked drain within a few minutes interval.

The hose can be cleared with a bent hanger or anything with a bent end slowly removing the litter with a few attempts.

A defect in the water supply line or a shut-off-valve at its open state can also cause water leakage. To get rid of this problem, the valve behind the panel of the refrigerator should be closed clearing the blockage and checked for any wear and tear. The water supply line should be tested and fixed according to the problem faced.

2. Strange noises from the refrigerator:

The refrigerator makes high pitched noises when the condenser motor fan stops working due to blockage. The fan gets blocked due to litter accumulating in the propeller blades and every time it rotates, the clicking sound produced is due to the litter.

This problem can be solved by unplugging the refrigerator at first and then brushing the blades with warm water and bicarbonate solutions. The freezer may also create sounds when the distance between it and the wall is narrow. This may lead to vibration and can be solved by displacing it from a space an inch away from the wall.

3. Temperature not cold enough:

The condenser fan is clogged with litter also plays a role in inadequate cooling of the refrigerator. If the condenser fan is blocked by debris, the rotation is slow, and enough frosting does not occur.

Clogged coils inside can also add to the raised temperature inside and result in inadequate cooling. To solve this problem, remove the evaporator cabinet and replace the fan. The compressor should start running after the replacement and will start frosting again.

A brush can be used to clean the condenser coils after unplugging the refrigerator from the source. The thermostat readings should be checked if the problem lies underneath it as well.

4. Freezing of food at the bottom part:

The bottom portion is not designed to be frosted at a freezing point in a refrigerator. So freezing of food at the bottom part is counted as an abnormal phenomenon. This can happen due to a wide range of reasons.

Firstly, the food may be insufficient compared to the surface area required to be occupied and the air to reach the food. Due to inadequate food compared to the amount of air inside, the food tends to freeze.

The food can also freeze inside if the temperature regulating points are not set correctly. Too much low-temperature setting points can cause food to freeze inside the bottom part.

The problem can be solved by setting the regulatory points to an optimum temperature, storing ample food compared to the surface area, avoiding the bottom part for negligible food, etc.

5. Ice building up inside the refrigerator:

A sudden frost inside the freezing compartment of the fridge is a matter of concern and needs attention to be solved as soon as possible. Inaccurate sealing of the fridge, and keeping the door open for too long add to the problem of ice building up inside the chambers.

Loose door pivots and careless closure of doors let the external air accumulate inside and cause the building of excessive ice. Defective door seals also let air pass through and cause building up of ice.

Ice buildup can lead to clogging inside the chambers and imbalance in humidity to be maintained inside. The proper preventive measure is to always tighten the door seals and check for proper closures.

It can be solved by unclogging the apertures, unplugging the refrigerator and introducing warm water to get rid of the excess buildup of ice pouring out.

Attention should be given so that distance is maintained between the wall and the fridge so that it gets enough space to release the excess air. Plug the refrigerator again and check the compressor to ensure proper cooling after the changes.

Conclusion:

Wrapping it up, it can be concluded that a refrigerator may face a wide range of problems if used incorrectly and carelessly. Inadequate cooling or frosting is always a matter of concern in this kind of appliance and can lead to severe damage to it.
Proper measures and useful tips should always be followed to take care of your refrigerator by yourself. Tricky tips can work smoothly and help you benefit from them without the help of repairing services and technicians. Thus, following some do’s and don’ts can help you fix your refrigerator in a short period effectively.

Note: Image Source  cnet.com/reviews/lg-lsxc22436s-side-by-side-counter-depth-refrigerator-review/

The post Top 5 Refrigerator Problems and Solutions appeared first on Appliance Masters Repair Service.

Dryers are one of the most essential and necessary appliances in the present everyday life because they are super useful in saving our time and doing a part of our daily chores, saving us in emergencies and saving our tireless efforts.

Not only are they useful in providing us with adequate scope to get our clothes dry in a limited period and a fast rate, but they also make our lives easier by doing their functions in times of necessity.

Although they are effective, they exhibit some difficult problems have created a nuisance. A few tips can always help solve these difficulties.

Problems commonly faced:

1. The dryer fails to start
2. The dryer makes strange sounds
3. The dryer does not heat
4. The dryer gets slow
5. The dryer gets too hot

Although the problems sound difficult and are incredibly annoying, they can be handled pretty quickly if the correct techniques are followed. Dryer repair near me are quite handy and available almost everywhere nowadays, but it always feels better to solve such problems at home yourself.

How to solve dryer problems:

1.The dryer fails to start

This is the most common problem faced while handling a dryer. No matter how many times you try to start it and push the switch again and again, the dryer fails to start. In such cases, always check the control settings and make sure everything is in the proper place.

If that is not the case, the problem might lie in your electricity connection. Ensure if the electricity is reaching your appliance and if the link is adequate.In most cases, a circuit breaker seems to slip, and the dryer fails to activate, and the problems can be solved by resetting the circuit breaker. If it persists, there might be an issue related to the circuit outlet which might need the help of the electrician.

The problems might also be related to the door switch and thermostats and will eventually require replacement with screwdrivers and pliers if you are comfortable dealing with them.

Most of the reasons the dryer fails to start lies within the electricity issues or mishandling through pressing the wrong system buttons and can be solved with proper handling.

2. The dryer makes strange sounds:

Often dryers are observed to make high pitched noises, and squeaking sounds without any reason while operating them which is scary at most times out of a sudden.

These noises indicate signs of abrasion and need immediate attention. Dryers contain a belt around the drum, and these belts may undergo loosening or scraping off and lead to abnormal sounds out of the dryer.

This can be solved by opening the cabinet and pulling the worn out belt off and replacing them with a new one. The sounds may also result from drum supports of the dryer called glides which seem to wear out evenly and cause friction with the inner wall and cause shrill sounds.

It should be replaced as soon as possible before damage may occur to the interior of the dryer. Anything metallic getting trapped inside the dryer may also result in jammed noises and can be a source of a nuisance so it must be brought into attention as soon as possible.

3. The dryer does not heat:

A dryer may fail to heat because it might get blocked due to impaired airflow inside, it might get clogged in the filter, and it might face a problem of the safety devices to function correctly.

Most of the time the dryer does not receive adequate air flow due to a blocked aperture and air cannot enter in sufficient amount leading to heat failure. In other cases, a clogged filter or non-functioning burner flame can cause the dryer to fail to heat.

In such cases, the problem can be solved by replacing the gas burner, cleaning the filter properly and clearing the aperture well. Defective electric coils and false readings in the thermostat indicate the heating ability of the dryer to be diminished.

These problems can be solved by checking the readings of the thermostat behind the dryer whether it is at zero or not.

If it is at zero, replace the thermostat by pressing the probes, and it will solve the problem. Removing the defective coils and replacing them is also an easy task and can be done manually.

4. The dryer gets slow:

A dryer may indicate slow functioning when it takes time longer than usual to dry clothes. A clogged filter and blocked aperture can lead to this problem when the dryer has not been adequately cleaned in a long time.

The best way to deal with this is to clean the filter once a month or within a few weeks to get it going smoothly.

Adequate air flow should be allowed to pass through the aperture to let the dryer to run at its optimum speed. The slow pace of the dryer can result in inadequate heating of the clothes, and the garments may appear wrinkled as well.

5. The dryer gets too hot:

A dryer may get hot when the internal conditions are extremely unfavorable, and the consequences can be pretty damaging if proper precautions are not taken and attention is not given. Accidents may also occur due to mishandling of the dryer during such times.

A dryer may get hot due to the accumulation of excess lint inside the aperture and cause humidity to be trapped inside. Excess heat can build up inside due to impaired thermostat operation and defects in the gas burner flame.

Poisonous carbon monoxide can also get accumulated inside during such conditions and cause overheating. To prevent such problems, the first and foremost priority should be to turn the switch off and let the dryer cool down first to avoid any accidents.

After the dryer has cooled down, carefully remove the filter and clean the lint trapped inside. The thermostat should be replaced if worn out, and the burner flame should be checked.

Final Verdict

Summing it up, it can be said that a dryer faces some difficulties due to irregular cleaning up and impaired functioning of the parts. Such problems may lead to hampering of the regular activities while using a dryer. In such a case, ample skills can help in the long run and solve the problems.

The post Top 5 Dryer Problems and Solutions appeared first on Appliance Masters Repair Service.

Microwave ovens have been sold since 1946. Then known as the Radarange, the technology advanced and more affordable and compact microwave ovens began to become popular for home and commercial use in the late 1970s. Some have questioned the dangers of using microwaves, similar to x-rays, in the home and early pacemakers were susceptible to malfunction when in close proximity to an operating microwave. As well, water may erupt out of a cup when it is overheated in a microwave, but it is generally accepted that a microwave, in good repair and operated in accordance with the operating instructions, is a safe and convenient addition to any kitchen.

Keeping Your Family Safe

The United States’ Occupational Safe and Health Administration cites a report from its Canadian counterpart that provides information on the safe operation of microwave ovens, which includes:

• Following the manufacturer’s instructions for use
• Check the door seal for wear
• Inspect the area where the door closes for damage, such as dents, that might prevent proper closure
• Never disable any safety locks
• Repair or replace any microwave oven that is not in good condition
• Repairs should only be made by qualified service professionals

So, the key to the safe use of a microwave oven is to maintain it in good working order. Even dirt that may accumulate in a door seal may allow radiation to escape a microwave when it is operating, just as if the seal was not working properly due to wear and tear. Notably, microwave ovens are not an appliance that should be maintained by non-professionals

An Ounce of Prevention…

Regular cleaning and maintenance, as discussed above, is key to the safe operation of all microwaves. Removing dirt and grease before it accumulates is crucial to maintaining safe operating conditions, and should be done on a regular basis. Inspection of the door seal and ensuring that the door closes properly is another important element to the safe use of a microwave oven.

Leave It to the Professionals

While simple cleaning can obviously be done by the owner, repairs of any sort to a microwave’s seals, door, sensors or any other internal part must be done by a trained professional. This is one appliance that is not an option to troubleshoot by yourself. If your microwave is making more noise than normal, is not heating up or in any way is not operating as it should, you should look to have it examined by an appliance repair service.

Who to Trust?

Appliance Masters has trained technicians who have the skill and experience to safely and competently repair your microwave, at an affordable cost. We work on all makes and models, and will work to find the best option to maintain your investment and extend its life while being sure that it is operating safely. If your microwave oven is not working properly, or if you just want to be sure that it is safe to operate, call us for peace of mind and know that your satisfaction is guaranteed

The post Danger in the Kitchen? appeared first on Appliance Masters Repair Service.