While dishwashers have been around for a long time, most homeowners know only their basic workings. As you can guess, this means that they always achieve mediocre results with their appliances.

What they don’t know is that there are plenty of dishwasher hacks they can use to get cleaner dishes and maintain their appliances for a long time. Wondering which hacks are these? Here they are as given by dishwasher repair professionals:

You don’t need to rinse the dishes

To make the work easy for the dishwashers, some homeowners rinse their dishes. This is unnecessary.

If you have been taking good care of your dishwasher, the appliance shouldn’t have a problem wiping off the chunks of extra food that could potentially clog your drains.

A well-maintained dishwasher should generate enough water pressure and heat to wash off even food that might have dried and stuck on the dishes.

Run a cycle with vinegar

If you have hard water and your dishwasher builds up mineral deposits, run a cycle with vinegar. The beauty of vinegar is natural, so you don’t have to worry about damaging your dishwasher. It’s also highly effective at getting rid of the musty smells, so you have a fresh-smelling appliance.

Once every few weeks, run a complete dishwasher cycle without any dishes or detergent. The vinegar will remove all the trapped particles, detergent residues, and minerals that might have built up in the appliance.

Load the dishes from the back to front

It’s definitely easier to pop a crack in the dishwasher and stick your dirty dishes there, but this isn’t the right way to go about it. This is because this leads to you having a problem keeping the dishes clean and unloading them.

For your dishes to be clean and easy to unload, pull the rack all the way out and load the dishwasher from the back to front.

Organize your flatware properly

If you don’t have a premium dishwasher with a horizontal silverware tray, place the forks and spoons pointing up and some pointing down. If your appliance doesn’t allow this, ensure that you don’t put all the forks together—mix them up with spoons.

When you mix them up, you allow the water to pass through each utensil more easily, so you have cleaner tines and spoon surfaces.

Arrange the plates facing inward

Most of the standard dishwasher models have sprayer arms that shoot water from the bottom center of the machine, stopping just a few inches short of the interior walls.

If you arrange the plates facing outward, the water jets might fail to reach the surfaces facing the wall, and you have unwashed dishes by the end of the cycle. To avoid this, arrange the plates facing inwards instead.

Put the bowls on the bottom rack, facing the center

Due to their shape, it’s tempting to place the bowls in the empty spots in the dishwasher, but don’t do this as they might damage the plates. They also might not get as clean as you want them.

To avoid this, place the bowls at the bottom rack, facing the center. When placing them, ensure there is a little overlap between them as much as possible. This is to ensure that the bowls receive the full force of the water stream and you don’t have smudgy spots.

Place the delicate items on the top rack.

The fragile items such as plastic storage containers, stemware, and glasses should go in the top rack, away from the jets. The reason for this is because the water pressure and temperature are a tad lower here. As a result, the items you place here are less likely to break or melt.

You can use the dishwasher to clean other items.

Besides the dishes, you can use the dishwasher to clean other items such as plastic kids’ toys, baseball caps, metal cabinet handles, and plastic combs. To ensure that these items get thoroughly clean, appliance repair Alexandria professionals recommend that you place them at their appropriate racks.

You also should run them on a separate cycle—don’t mix them with your dirty dishes. Before you put anything in the dishwasher, confirm that it’s dishwasher safe. You don’t want to damage it, do you?

The post 8 Dishwasher Hacks Every Homeowner Should Know first appeared on HVAC Repair, appliance repair. The post appeared first on Express Appliance Repair

The refrigerator is most probably one of the essential household appliances at your home. Also, it is one of the most expensive home appliances. So why wouldn’t you take proper care of it?

When your refrigerator fails, it can mess up your day.

If you take good care of your fridge, it will run efficiently and last longer, so you don’t need to worry about repairing or replacement costs soon.

Are you wondering what is the proper way to take care of a refrigerator? Well, there are plenty of ways to go about it. Here are some of them as given by appliance repair professionals:

Set the right temperature

Keeping your refrigerator at a temperature between 30-45 degrees Fahrenheit will allow the internal environment to stay consistent, preserving your food quality. Maintaining the right temperature will also ensure that your food stays longer and better.  If you set your refrigerator’s temperature very low, it will have to run more to cool at a lower temperature; you will just be adding an extra run on the compressor that does not need to be there.

Clean out the inside

Food residue, frost or dirt can seem to take over your refrigerator after some time. If you are opening your refrigerator frequently, which is normal to most people, you might spill or forget to close the door. Especially kids forget to close the door and do not clean after themselves in case of spills.

It would help if you cleaned out the inside of your refrigerator two times a year. Do not buy any food to refrigerate the day you plan to clean your refrigerator. Allow the inside to defrost and then dry it up. After cleaning the inside of your refrigerator, look for a fridge aid to help deodorize and keep your refrigerator fresh.

Ensure the doors seal tightly

When most people take something from the refrigerator, they just shut the door and think they have fully closed it. You might often get back to the refrigerator and find its door slightly open, meaning the gasket has an issue. A gasket is a piece of rubber found on the edge of the refrigerator door to ensure the temperature stays consistent. Clean the gaskets twice a year using baking soda and water to clean any dirt or food residue. If necessary, you can seek help from professionals to replace the gasket.

Clean off cooler fan and condenser coils

Cleaning the condenser coils and the cooler fan is one of the most crucial things to maintain your refrigerator.  When dust or dirt cover the coils,this will reduce the energy efficiency. The compressor will run hotter than it would with clean coils. The extra strain on the compressor will reduce its lifespan, causing you stress to replace it.

You should remove the grate at the bottom of your refrigerator and clean it using a brush at least once a year. Condenser coils help in removing heat from freezers and refrigerators. Ensure you have unplugged your refrigerator from the power socket before you start cleaning.

Using a brush, remove all the dirt from the cooler fan, coil, and everything else around there. Use special brushes that help to make cleaning cooler fan and condenser coils easier. Check the manufacturer’s specific cleaning instructions manual in case you have any questions.

Keep your refrigerator full

The more food you have in your fridge, the better your appliance will maintain the proper temperatures. Keeping your refrigerator empty allows warm air to get inside the refrigerator every time you open it. Hence reduce efficiency. Keeping your refrigerator full will reduce the overall maintenance costs and usage of your refrigerator. Even if you mostly eat outside, at least fill your refrigerator with drinks.

Avoid putting warm food in your refrigerator

Always allow food leftovers to cool down before putting them in your refrigerator. This helps to reduce the amount of warm air inside the fridge and save some run time on the compressor.

Bottom-line

Your refrigerator is one of the most expensive appliances at your home so you should take proper care of it.  Ensure you set the correct temperatures on your refrigerator, clean the condenser coils and cooler fans to ensure your refrigerator operates efficiently. In addition, ensure your fridge is always full and avoid placing warm food in your fridge to avoid warm air getting inside. When you notice even a minor problem, don’t ignore it. Instead, get in touch with a refrigerator repair Alexandria expert to look into it.

The post What Is The Proper Way To Take Care Of A Refrigerator? first appeared on HVAC Repair, appliance repair. The post appeared first on Express Appliance Repair

Do you have a feeling that your ice maker has a problem? It could be true.

How do you know if your refrigerator ice maker is bad? Well, there are a number of things you can look out for. Some of these things as given by appliance repair professionals include:

The ice maker not making ice

The unit is supposed to make ice, so if it’s not, there is definitely a problem. The icemaker will fail to make ice for plenty of reasons, such as wrong temperature settings, dirty filters, blockages, and many others.

You should look into the unit and confirm whether the thermostat is set at the right temperature. As a rule of thumb, ensure that the temperature doesn’t exceed 5ºF.

While at it, check the arm lever and ensure that it’s pushed down. If it’s up, it might be the reason the ice maker won’t make ice, so you need to push it down.

How is the water stream? If the stream is weak or there is no water coming out, you might be having a problem with the waterline. Inspect it and if blocked or damaged, fix it.

Ice maker not making enough ice

Sometimes the ice maker will make some ice, but you can tell it’s not working at its capacity. In most cases, this will happen due to problems with the waterline. You need to access the line and find out whether it’s blocked or damaged.

Fix the problem and ensure that the stream has a steady flow with good water pressure (30-120 psi). When replacing the water line, ensure that everything is connected tightly and the water inlet valve is fully open and free of debris.

Ice maker making ice that is too small or has a weird taste

If the ice coming from the ice maker is too small, it could be due to water line problems. Does the ice have a weird taste or color? This might be due to food odors from the freezer.

Check the water line for any bulges, kinks, or damage. If you see any problem, fix it.

If the problem is too big that you have to replace the line, replace the line using a copper water line. This way, you have a durable water line that won’t give the water a weird taste.

To prevent the smell of the food in the freezer from getting into the water, make it a habit to cover the food with plastic.

Ice maker not dropping ice

If your ice maker isn’t dropping ice, you could be having a blockage in the ice tray, or the ice cube has jammed between the lever and bin. If this is the case, double-check and confirm that the lever is pushed down and/or the ice maker is switched on. If you aren’t sure about it, consult your owner’s manual.

Also, confirm if the problem is due to ice accumulation in the ice bin. If there is blocked ice, remove it by carefully chipping at it with a plastic knife.

Ice maker making loud noises

Although the icemaker should make some noise when working, the noise shouldn’t be too loud that it’s a distraction. So if your appliance is making constant or unusual noises, it might be having a mechanical problem that you need to look at.

In most cases, you can’t properly diagnose the noises and fix them on your own—you have to hire an experienced refrigerator icemaker repair Fairfax professional to help out.

Water leaking into the freezer or on the floor.

Two of the most common culprits for this problem are a faulty water line and an unleveled icemaker.

The first place to check is whether the refrigerator is leveled. If it’s not, level it. Once the fridge is level, check the inside of the freezer and ensure that it’s also leveled.

How is the water line? Check its condition and ensure that the fill tube is positioned properly. The tube’s location will vary depending on the ice maker model, but it should always be above the icemaker tray or inside the water fill cup.

The post How Do You Know If Your Refrigerator Icemaker Is Bad? first appeared on HVAC Repair, appliance repair. The post appeared first on Express Appliance Repair

If you are going on vacation for a month or more, you can’t keep your electric appliances running. One of the questions you must be asking is, should I turn off the refrigerator when not in use?

The answer to this question is a definitive yes. Appliance repair professionals recommend you turn off the fridge and unplug it at the wall.

The obvious reason you should shut the fridge is to save power. You don’t want to keep receiving high energy bills you aren’t consuming, are you?

The other reason you should shut the appliance is because you don’t want to keep worrying about what is going on at home.

Although, they are good servants, most appliances are ticking time bombs especially when they run unsupervised. They can fall, catch on fire, among many other things.

When you shut your appliance, you have peace of mind that none of your units can start a fire in your absence.

Besides shutting and disconnecting the fridge, there are several other things you should do when you will be gone for extended periods. Some of these things include:

Defrost and clean the appliance

If you don’t properly clean the fridge before storage, you will create a lot of mess that the fridge will be unusable by the time you are retrieving it from storage.

One major concern is mold that often starts from the food debris and spreads to the other parts of the fridge. There is also the pests concern. Ants and rodents can be attracted to even the smallest food pieces so when you don’t properly clean the fridge, these pests can get into your appliance and cause damage to the electrical components.

To defrost the fridge, remove all the food items and unplug the fridge. This will trigger the defrosting process and you should keep the refrigerator doors open so that moisture can escape from the fridge.

To avoid flooding your floor, strategically place a towel to catch the dripping water.

For peace of mind that the fridge is completely dry, defrost it at least a week before you leave for your vacation.

As the fridge is defrosting, you should clean both the insides and back of it.

Take out the drawers, shelves, and other removable parts of the appliance. Clean and soak these parts with mildly soapy water. For best results, ensure the water is warm. Avoid scalding hot water as it can damage the cold plastic or glass.

Using a mixture of baking soda and water, scrub away any materials that might have built up inside the fridge and freezer compartments.

As much as you want the fridge to be spotless, don’t use chlorine bleach, ammonia, or any other abrasive cleaning solutions as they can crack or even discolor the plastic and stainless steel.

Once the insides of the fridge are clean, turn your attention to the outside. Dust the coils using a brush attachment or run a vacuum cleaner. You can also use a dry cloth.

Store the fridge in an upright position

If you will be moving the fridge from its usual place, use a dolly or hand truck to move it. As a rule of thumb don’t move the fridge while laying on its side.

When you store it, ensure that it’s not in a slanting position—it should always be in a straight position.

The reason for this is to ensure that you come home to a properly functioning compressor.

Keep the fridge dry

The last thing you want is to reverse all the hard work you have put into cleaning and defrosting your appliance.

To ensure that your fridge remains dry and no moisture gets inside, remove the doors on both the fridge and freezer compartments.

According to refrigerator repair Springfield professionals, when you do this, you ensure no seal forms so your appliance is free from molds.

If you don’t want to go through the trouble of removing the doors, wedge an object between the door and the compartment frame so that the door remains open.

When choosing the wedging object, ensure that the object is tough and won’t bend or get indented over time hence close the door and cause the damaging seal to form.

The post Should I Turn Off Refrigerator When Not In Use? first appeared on HVAC Repair, appliance repair. The post appeared first on Express Appliance Repair

Imagine this. You have a large load of dishes, and you don’t want to do it in two cycles. How do you fit more in a dishwasher? Are you asking this? You are in luck as there are plenty of tricks you can use to maximize the dishwasher space without overcrowding and breaking the dishwasher, and you have to hire an appliance repair professional to fix it.

Some of these tricks include:

Take out the forks, spoons, and knives

It’s recommended you clean the silverware from the bottom rack, and you can do it if you don’t have a lot of dishes to clean. But, if you have a large load like in our case, you don’t have this luxury, so you should free up space by removing the forks and knives from the bottom rack.

Luckily, the silverware is easy to clean. Put them in a sink full of warm, soapy water, and you are done in minutes.

Cleaning the bowls, salad spinners, pot liners, and other bulky items isn’t as easy, is it? So, you should let the bulkier, difficult to clean items take the space of the easier to clean items.

Hold the small items in a mesh bag.

Does your load have plenty of water bottle tops, lids, and other small items that won’t have a place in the dishwasher? You shouldn’t leave them out of the cycle. Throw them in a mesh laundry bag, then lay the bag on top of the items on the top rack and let the dishwasher do its work.

The bag keeps the small items from falling through the cracks and ensures that the dishwasher functions to its best.

Load glasses between the tines

This tip has been around for a long time, and it’s not only the best way to load your dishwasher, but also a great way to ensure that your dishwasher carries as many items as possible.

When loading the dishwasher, place glasses between the tines, and not on top of them.

By doing this, you will have a highly functioning dishwasher and get cleaner glasses and, at the same time, prevent the glasses from breaking.

Squeeze flat items around the dishwasher perimeter

Have you stocked the dishwasher to the brim, and it seems like it can’t take anymore? Not so fast. Is the perimeter full?

If it’s not, this is one of the best places to squeeze in flat items such as plastic cutting boards, sheet pans, and cooling racks.

When you put them here, you leave enough space for the bulkier items, and at the same time, you ensure they are in the spray arm’s line, so they are clean by the time you are removing them.

Place some top rack items in the bottom racks.

If you have been reading how to properly load your dishwasher, you know that each item has its place. Some items belong in the top rack and others in the bottom rack.

Most people begin with loading their top racks, so by the time they get to the bottom rack, they have fewer items.

If you find yourself in a situation where you have a few top rack items, and you have a few spaces in the bottom racks, you should go ahead and place them there. Some of the best items to put here are the mugs and cream bowls.

Since these items aren’t supposed to be cleaned here, give the racks a shake test before running the cycle.

Other valuable dishwasher loading tips

To get the most from the dishwasher, you need to load it properly. Some of the valuable dishwasher loading tips you should consider include:

Load the plates so that they face the center: The purpose of this is to ensure that they are in the spray arm’s line. Spray arms work from the middle out, so by placing the items such that they face the center, you ensure that they get the proper spray treatment they deserve.

Use a wire dish rack: Are you cleaning items that are too big for the mesh laundry bag and small that they won’t flip around during a cycle? Dishwasher repair Springfield recommend using a wire dish rack. Turn the rack upside down and use it to anchor your items down.

The post How Do You Fit More In A Dishwasher? first appeared on HVAC Repair, appliance repair. The post appeared first on Express Appliance Repair

My burner flames are turning orange. Should I be worried?

If you have a gas-burning stove, you probably understand a lot of the benefits this can provide, and you’re probably accustomed to seeing the bright blue flames that signify it is working well. Therefore, it can be quite jarring if you notice orange flames are coming out of your natural gas stove. Why is this the case? What does this mean for your stove? Below, we discuss some of the contributing factors to the change in color and what you can do about it.

Your Flames Turn Orange When They Become Contaminated

The most common reason why gas stoves emit orange flames is that they have become contaminated with something, usually calcium. In order for your natural gas stove to combust properly, the right amount of fuel has to mix with the correct amount of oxygen. This leads to fire and carbon dioxide. If something offsets this balance, it can lead to something called incomplete combustion. As a result, the flame color changes because the stove is not working as well.

If something contaminates this fuel and oxygen balance, such as calcium, your stove is not operating at optimal capacity. As a result, there are cooler pockets in the flames, resulting in an orange color. (Blue flames are usually the hottest flames that come out of your stove.) You need to address the buildup of this contaminant in order to ensure your gas stove is working as efficiently as possible.

A Strange Phenomenon

Something odd that we’ve noticed over the years, is that people who run humidifiers in their home will also have their flames turn orange on their gas stove. This is caused as the moisture released into the air by the humidifier combines with remnants of partially dried water droplets which contain salts, therefore causing a similar effect as the calcium we talked about. If you are experiencing orange flames and are also running a humidifier, simply try turning off the humidifier and letting the air dry out before turning on the stove. Most likely, the flame will return to blue. If not, you may be experiencing one of the other contributors we are discussing here.

Orange Flames Could Also Indicate Unsafe Carbon Monoxide Levels

There are numerous reasons why you are fuel and oxygen balanced may not be appropriate. Even though calcium is one of the most common causes, there are other issues as well, and there could be an elevated level of carbon monoxide.

Carbon monoxide poisoning is a serious issue. This can lead to a variety of symptoms including headaches, dizziness, and nausea. In some cases, it could even render you unconscious, leading to an emergency. Remember that a gas stove is not a vented appliance. Therefore, you should only use it for cooking, not heating. If you do see orange flames, this could indicate a higher level of carbon monoxide, which is why you need to call a professional as quickly as possible.

Contact Sarah’s Appliance Repair for Help with Your Stove

If you see orange flames in your stove, this indicates it is not working as efficiently as it should. In order for you to keep your utility bills low and ensure the longevity of your stove, you need to address this issue as quickly as possible. That is where we can help you. At Sarah’s Appliance Repair, we can quickly diagnose what is wrong with your stove and get it fixed for you. If you’re concerned about your stove or any other home appliances, contact us today for personalized, friendly service!

The post Why Are My Range Burner Flames Turning Orange? appeared first on Appliance Repair New Mexico.

Are you wondering how do I get the best results from my dishwasher? There are plenty of ways on how to go about it as given by dishwasher repair professionals. Some of these ways include:

Scrape the dishes

Dish detergents work with the food residues to activate the enzymes that get the dishes clean but at the same time, they make it hard for the dishwasher that the dishwasher doesn’t get the dishes clean on the first try.

To get over this, you should scrape the dishes and get rid of most of the food residues.

Some homeowners pre-rinse the dishes which isn’t wise. While it might seem like the right thing to do, pre-rinsing the dishes wastes a lot of water than you would have spent had you run the dishwasher twice.

As you can tell, this isn’t running the dishwasher in the most effective way, is it?

Before you put the dishes in the dishwasher, scrape off the food debris into the sink or trashcan to relieve the dishwasher from too much work cleaning the dishes.

If your dishes have a lot of grease or burnt-on food on them, select the sanitize feature on your washer. The higher temperatures in the machine will help create a more thorough rinse cycle, which gives the washing machine more cleaning power.

Load the dishwasher properly

Although, all you want is for the dishwasher to clean the dishes, you need to load it properly for it to clean the dishes properly. For the best results, here are tips on how to properly load the dishwasher:

Load the utensils so that the soiled end faces up

Place the large and bulky items on the bottom rack, taking care not to block the spray arms

For the small cups, items and plastics, place them on the top rack

Avoid overfilling the dishwasher as like the refrigerator, it won’t work effectively when too full.

If necessary, place the speciality items in the appropriate dishwasher accessory. For example, for the wine glasses and chopsticks, place them in the right cleaning areas.

Regularly do a double-check and ensure that the items you are cleaning are dishwasher safe and the spray arms are free from obstruction.

Use the right detergent

As much as you only need to get the dishes clean, the detergent you use has a significant impact on the results you get.

Many homeowners have the impression that using a lot of soap with plenty of bubbles gives the best results, but this isn’t the case. In fact, when you use a lot of soap you leave a pile of foamy bubbles that can erupt from the machine and get into your kitchen floor damaging it.

The excessive detergent can also create a buildup of moisture that can take a long time to air out, which can end up damaging the washing machine.

When it comes to your detergent of choice, you should use powder as it cleans better and it doesn’t get gummy around the parts so your dishwasher is less likely to break down.

Use hot water

Hot water always cleans better so before you start cleaning the dishes, ensure that your dishwasher is receiving enough hot water. You can check the temperature of the hot water at the kitchen faucet using a meat or candy thermometer.

For the best cleaning experience, ensure that the water is at least 120 degrees.

If the temperature isn’t high enough, adjust it accordingly.

You can also ensure you have enough hot water in your dishwasher by running hot water in the kitchen sink before you start the dishwasher.

Select the right cycle

You can be using the right detergent and the right temperature but if you choose the wrong cycle, there is no way you are going to properly clean the dishes. To get the most from your dishwasher, choose the right cleaning cycle.

Most dishwashers have three cycles: regular cycle for normal cleaning, the heavy-duty cycle for deep cleaning heavy-duty materials such as pans and pots and the light cycle for cleaning china and fragile items.

Keep the dishwasher clean

The same way you should clean your car is the same way you should clean your dishwasher to remove stuck-on food particles, mineral buildup and residual detergent. You can do the cleaning by yourself or hire a professional appliance repair Alexandria professional to help out.

The post How Do I Get The Best Results From My Dishwasher? first appeared on HVAC Repair, appliance repair. The post appeared first on Express Appliance Repair

When you buy a refrigerator, you want it to last for as long as possible. Unfortunately, the appliance can’t just last for a long time—you have to take good care of it.

How do you take care of a refrigerator? According to refrigerator repair professionals, there are plenty of ways to do it. Some of these ways include:

Keep the door closed.

Keeping the fridge door closed prevents the cool air from leaving the fridge. This prevents the refrigerator from overworking, which keeps the energy bill low and ensures that the fridge has a long life.

To ensure that you open the fridge door only when it’s necessary, think about what you need before you open the door. This way, you go straight to what you need without holding the door open, thinking about what you want.

Other people will get what they want then fail to close the door completely. This is wrong, as it’s the same as when you don’t pick what you want fast.

After you have picked what you want, confirm that you have fully closed the door.

Keep the fridge level.

There are plenty of downsides that come with a fridge that isn’t level. For one, the doors don’t close as well as you would want them to. As you can guess, this results in the fridge overworking, and it has a short life. The motor also stains, and this also contributes to the fridge going to an early grave.

When you place the fridge in your house, take time to confirm that its level. One of the best ways to go about it is to place a level tool on the shelves. If not balanced, adjust the feet or place a piece of stone or wood to keep it balanced.

Clean the coils

Although not visible, coils caked in dust, debris, and pet hair make the fridge overwork which works against the appliance.

For your appliance to last for a long time, you need to clean the coils. The coils are located at the bottom of the fridge or in the back. To access them, you have to remove a grill. In some cases, depending on the type of fridge, you have to snap off a plate or remove a few screws to access them.

If the coils in your appliance are located at the back, you have to roll or move the fridge away from the wall to access them. While at it, clean the floor under the fridge using a vacuum, stiff brush, or any specialized tool.

When it comes to cleaning the coils, you don’t need to be fancy about it. Simply running a vacuum or brush over and under them will get the work done. Besides the coils, also clean the condenser fan.

To keep your fridge in top shape, clean the coils once or twice a year. You can clean them even more regularly if you have a pet that sheds.

Maintain the right temperature

To prevent your fridge from overworking, you should regularly check the temperature in the fridge and freezer sections of your appliance. For an ideal functioning fridge, the fridge compartment should be around 37 to 40 degrees Fahrenheit, while the freezer section should be at zero degrees Fahrenheit.

If you have an older model without an inbuilt temperature gauge, buy an inexpensive thermometer from your local home improvement store.

Run it full

A fridge with fewer items is more efficient than a full one, right? Wrong. When you fill your fridge, the cool air easily moves from one item to the other, which comes in handy at helping the unit cool better and operate more efficiently.

While you should keep the fridge full, you should be cautious that you don’t overstock it such that there is no room for the cool air to flow, which leads to the food spoiling.

Overstuffing the fridge also blocks the vents and controls, causing the fridge to overwork and head to an early grave.

Place it away from heat sources.

Most people place their fridges in the kitchen, where most of the heating appliances are located. While this is the case, it’s still possible to place the fridge away from the oven, cooktop, and other heat sources.

According to appliance repair Alexandria professionals, placing the fridge close to the heat-generating items makes the fridge work harder than it shoul. This not only results in it consuming a lot of energy but also drives it to an early grave.

The post How Do You Take Care Of A Refrigerator? first appeared on HVAC Repair, appliance repair. The post appeared first on Express Appliance Repair

When you need an appliance repair company, you need to find a good one. The best practices you should look for fall into the following six categories: Communication; Expertise; Equipment; Respect; Honesty; and Value. This post will consider each of these in turn.

Communication

Is it easy to get a hold of your appliance repair company? When you call, you should be able to speak to a real person who really listens to your problem. You should be told when to expect the repair person, and that should be a brief window of time, not all morning or all day. You should expect that your repair person will call you if there are any issues with the arrival time, and that he will explain the problem with the appliance to you clearly. Finally, your appliance repair company should tell you approximately how much it will cost to fix the problem.

Expertise

Your appliance repair company should have certified technicians, holding both state and federal certifications. Ideally, they should be factory-trained. Look for an appliance repair company that is well established and has a good reputation. If it’s been around for some years, it will have clients who have been helped and a name to live up to. Read its reviews, and not just the ones on its website. Look at reviews on consumer websites like Angie’s List. Reviews should mention knowledgeable technicians and proper equipment, among other positive attributes.

Respect

You want an appliance repair company that has respect for your time, for your home, and for you personally. Working with you to come to your house at a time convenient for you is a mark of respect. When the repair person comes to your home, he should make every effort to keep your space clean and tidy, both during the repair itself and when it’s finished. That’s a mark of respect. He should make sure that his repair efforts disrupt your family routine as little as possible, explain the situation to you clearly and without jargon, and give you an honest assessment of any costs or time frames involved.

Honesty

You need an appliance repair company with a strong reputation for honesty. When appliances break, repairing them can sometimes involve a lot of money. Your appliance repair company should be able to give you accurate estimates, and also let you know if there’s a range of costs. An honest appliance repair technician will tell you when you’re better off replacing an appliance rather than repairing it, too. And if you’re dealing with an independent appliance repair company rather than one connected to a major brand, you can be certain that they’re not motivated by any self-interest.

Value

The most inexpensive appliance repair company is not necessarily the best value. Value is determined by cost, of course, but it is also determined by elements like dependability, responsiveness, and relationship. Does your appliance repair company offer same day appliance repair? It should. Does it charge you another service call charge if a return trip is needed because of ordered parts? It shouldn’t. These are the kinds of intangibles that really enhance an appliance repair company’s value to you. You want someone you can rely on to get there when needed, deal with the issue appropriately, and charge you a reasonable fee.

Appliances cost a lot of money, and when they break down, it can bring chaos into your family life. You might feel desperate, but you should still take the time to find the best appliance repair company around. You’ll be glad you did.

The post What Should I Look For in an Appliance Repair Company? appeared first on Dave's Appliance Service.

Your garbage disposal is an important kitchen appliance. It allows you to deal with food waste quickly and efficiently, minimizing the risk of ants or other pests attracted to food. So when your garbage disposal starts making strange noises, you need to pay attention. Here, we’ll explore what it means if your garbage disposal starts humming, and what you can do about it.

The humming sound that your garbage disposal makes indicates that there is power coming into the unit but the blades are not turning. Sometimes the sound is more like a buzzing rather than a humming. Sometimes you may find that the garbage disposal will stop on its own even if you did not turn the unit off. There are a number of reasons it might be making these noises or behaving in this way.

Poorly Ground Food

Garbage disposals work by grinding up the food waste and washing it down; sometimes, though, it is not ground up as thoroughly as necessary. It is not uncommon that large bits of food or bone become stuck between the impeller blade and the drain hole causing the unit to jam. When you hear the humming or buzzing, don’t immediately assume that somebody put something down the disposal that shouldn’t be there. It could be poorly ground food.

Foreign Object

Maybe somebody did put something down the disposal other than food. It’s easy to drop a spoon or other utensil, and if it isn’t immediately retrieved, it can cause a blockage. Maybe a child threw something down the disposal and didn’t mention it. In any event, the foreign object could certainly cause the impeller blades to jam, producing a humming or buzzing sound.

Tripped Power Breaker

Garbage disposals are usually on a separate circuit breaker known as a Ground Fault Circuit Interrupter (GFCI). GFCI circuit breakers and outlets protect people from electrical shock. If they detect an energy leak of even a thousandth of a milliamp, they will shut down the circuit. If your garbage disposal is humming or buzzing, it could be due to a tripped breaker. This lack of electrical current to turn the motor may cause a humming sound to be produced.

What to Do?

Reset the Unit
If the problem is a tripped breaker, simply press the reset button and see if normal disposal operation is restored. The reset button can be found at the bottom of the unit. Since this is an easy fix, it’s a good idea to start with that. If the humming or buzzing persists, you’ll need to investigate further

Identify and Remove Blockage
Whether it is a large bone or a fork, an object stuck in the impeller blades needs to be removed. Since this involves some danger, it may be something you want the experts at Dave’s Appliance to do. If you want to attempt it yourself, you need to follow these steps:

Cut the power to the garbage disposer by unplugging the unit and cutting the electrical circuit. This prevents the motor from burning out and more importantly ensures that you do not get electrocuted;

Under the sink you will find the breaker socket at the bottom section of the garbage disposal. You need to insert the hex head Allen wrench in that breaker socket;

Start moving the wrench back and forth to get the flywheel to turn and set free the jammed particle in the impeller blades;

Return power to the garbage disposal unit and check if normal function has been restored.

When your garbage disposal starts acting up, you want to deal with it right away. Hopefully, a simple reset eliminates the humming or buzzing. If a blockage is the problem, you might want to contact us at Dave’s Appliance. And if you identify and remove a blockage yourself, but the humming or buzzing persists, you should definitely give us a call.

The post Garbage Disposal Humming? appeared first on Dave's Appliance Service.