Wondering how to ruin a washing machine? There are plenty of ways to do it. Here are some of these ways:

Overloading the machine

You might have the impression that loading the machine’s drum to full capacity will save you time and money, but this isn’t the case. According to washer repair professionals, overloading the machine leads to some clothes coming out unwashed. Sometimes, you even put the machine at the risk of getting damaged.

Washing machines are designed to carry a specific weight of clothes. In fact, most of the modern appliances won’t start if you load more clothes than they are designed to carry.

If you have an older appliance, the appliance might still run while full. Unfortunately, the clothes don’t clean well as there is less room for water and detergent to spread throughout the load.

So there is the risk of overloading the washing machine leading to damage to the drum hence shortening the appliance’s life.

To avoid ruining your appliance and clean your clothes properly, load the washing machine properly. Before you start a cycle, ensure there is a space between the top of the drum and the top of the load in the drum. There should be a space equal to the width of your palm.

If you are strapped for time and want to clean as many clothes as possible within a short time, instead of cramming everything in one load, use the quick-wash setting and have two decent-sized loads.

Although, the clothes won’t be as clean as they should, you will have saved time, and you won’t have overloaded the machine.

Failing to service the machine

Like any other appliance, you need to maintain the washing machine to keep it in top working condition. At least once a year, hire an appliance technician to inspect the appliance and clean it to get rid of mold and awful smells.

If you go for a couple of months or years without giving the machine some attention, you will ruin it.

To avoid this, make it a habit to run a service wash every month that will keep the machine clean and get rid of odors.

The cool thing is servicing the machine isn’t complicated. All you need to do is to set the machine at 90°C then run the appliance using detergent or without. If not sure how to do it, check the machine’s manual.

Failing to level the machine

Washing machines run at super fast speeds. For them to do this safely, they need to be level on the floor. Unfortunately, if an inexperienced technician installed the machine, it won’t be level.

The machine might also not be level if you have gone for a long time without servicing it.

If your washing machine is making weird noises when running, chances are it’s not level. To level it, loosen the locking nut, then use a spanner to lower or raise it until its level. Check whether the machine is level with a spirit level and tighten the nuts.

Using too much detergent

Using a lot of detergents gives you immaculate clothes, right? Wrong! Besides the large amounts of detergents being harmful to your clothes and your hands, they can clog the washing machine, shortening its lifespan.

The cool thing it’s easy to avoid ruining the washing machine with too much detergent. Before running a cycle, check the owner’s manual and confirm the amount you need. Don’t guess the amount. Always measure the amount to avoid problems.

While you might save money by making your own soap, avoid using homemade soap as it rarely cleans as effectively. Washing machines are designed to use detergents, not soap, so you will ruin your machine by using soap.

Washing coins, belts, and other harmful items

Belts and coins can break the washing machine drum, leaving you with an expensive repair. To keep appliance repair Alexandria at bay, always double-check the clothes and ensure there are no belts. Also, check the pockets and ensure there are no coins.

Do you have clothes with large metal buttons? Don’t clean them bare—instead, place them in a laundry bag.

If you suspect the buttons on your clothes might break the glass, run the machine at a slower speed.

The post How to Ruin a Washing Machine first appeared on HVAC Repair, appliance repair.

The post appeared first on Express Appliance Repair

Your washing
machine is supposed to keep your clothes looking clean and
smelling great, yet if a washing machine is not functioning well, it
can do the opposite. Sometimes it starts by seeming as though there
is a marker stuck in the wash that is marking up the clothing. If it
continues then, it could be that there is an issue with the machine
itself. You can check below to learn about some of the potential
causes, or you can call American Appliance Repair for appliance
assessment at 800-640-9934.

You Might Be Loading Your Machine Too Full

Many people assume that the issue with
overloading is that the water and soap cannot get to the clothing.
This is not the issue. The issue is that the detergent cannot
circulate well after it is on the clothing. This could lead to stains
caused by the detergent. This is a more common issue with powder
detergent than with liquid, though either can cause issues.

You Are Using Too Much Fabric Softener

If you have ever gotten liquid fabric
softener on your hands, you know that it has a sort of waxy
consistency. Why? Because it coats the fibers of your clothing with a
nice-smelling wax. However, it only works if it is dissolving into
the water correctly. If the machine is too full, or if there is much
too much fabric softener, then it can leave behind visible residue.

Your Washing Machine’s Door Seal is Moldy

If the issue is black streaks after
your clothing comes out of the washer, then you should take a look at
the gasket on your washer. This is more often a problem on front-load
washers. If you see mold in there, then that is what is leaving
stains on your shirt. This mold is allowed to grow because the water
is not drying quickly enough because the seal is not tight enough.

The first step to fix this issue is to
clean away the mold with white vinegar or your favorite cleaner. You
can then think about replacing the entire seal. You can talk to us to
find out if this is the best option.

Your Washer Has a Damaged Drive Belt

The drive belt is the piece of the
dryer that physically moves the drum. When it is moving, the fabric
softener and detergent are able to evenly distribute over the
clothing. If it is not working well, then the detergent and fabric
softener can drop on one spot of your laundry and cause stains.

Whether you are having one of the above
issues with your washing machine or something else entirely, you can
contact American Appliance Repair now at 800-640-9934 for help.

The post Is Your Washing Machine Leaving Marks on Your Clothing? Learn the Possible Reasons Why appeared first on American Appliance Repair.

When you get a new house, you want the appliances to last for as long as possible to minimize the amount of money you have to spend on appliance repair and replacement.

The dishwasher being an integral part of the kitchen, you must wonder, how many years should a dishwasher last? On average, dishwashers last between 9-10 years. Of course, several factors will influence the appliance’s lifespan such as:

Frequency of use: In an ordinary house, the dishwasher will cycle five times a week. If you have fewer people living in the house or you are rarely in the house, you will use the dishwasher less often, meaning the appliance will last for a much longer time.

Quality: Like other products in the market, dishwashers are of distinct qualities that vary depending on different brands. As you might guess, high-quality appliances from reputable manufacturers will last for a much longer time than poor-quality units from an unknown company.

Maintenance: How well do you take good care of your appliance? You should expect a well-maintained unit to have a much longer lifespan than a poorly maintained one.

Price: Although expensive doesn’t mean better, in most cases expensive appliances have longer lifespans. This is because they are often of better quality. Besides this, expensive appliances save you a lot of money as they operate more efficiently.

Can you expand the dishwasher lifespan?

Yes, you can definitely do that. Here are tips on how to do it:

Keep the appliance clean

Going for a long time without cleaning the dishwasher causes different parts to become grimy, which reduces the appliance’s cleaning power and efficiency.

Built-up residue can also cause the dishwasher to clog up and even breakdown.

To avoid this, make it a habit to routinely wipe down the door seals and food spills using warm water, mild soap, and a soft piece of cloth.

Every few months, open up the appliance and clean the food trap and filter.

Don’t overload the machine

You might have the impression you are saving money and time when you cram many dishes in the dishwasher, but this isn’t the case. Overloading the machine will restrict the water spray patterns, preventing proper cleaning.

Since the dishes won’t get clean enough, you have to rewash them. Running the machine unnecessarily reduces the appliance’s lifespan.

The mechanical parts also wear out more frequently, forcing you to keep on hiring a repair technician to repair and replace them.

To avoid all this from happening, load your dishwasher with just enough dishes. Remember, you are better off having two full cycles than many partial cycles.

Only use the dishwasher to clean the dishes

When you scour the internet, you will come across videos of people cleaning different things with their dishwashers. Don’t do this.

Don’t clean your car parts with the dishwasher as the parts are greasy and the dishwasher and detergent aren’t designed to handle that amount of grease.

When you frequently clean the car parts in your dishwasher, it’s a matter of time before you clog the filter and ruin the pump.

You also shouldn’t wash candlestick holders with the dishwasher as the hot wax embeds into the different crevices and you end up destroying the machine components.

A good rule of thumb is to never clean anything that isn’t dishes.

Rustproof the racks

The racks are covered in a plastic coating that prevents rust from coming about. When rust develops on the racks, it gets to the pump and since the pump is the heart of the dishwasher, the rust flakes can get to the pump and clog it.

To prevent this from happening, regularly inspect the racks, and if the plastic coating has worn off, repair it immediately.

Follow the owner’s manual

Every dishwasher comes with a playbook (also known as the owner’s manual) which contains valuable information on how to use and maintain the machine. To avoid issues, follow the manual’s wisdom.

Fix problems as soon as they come up

Even with the best care, it’s common for the dishwasher to develop problems. When this happens, hire dishwasher repair Springfield professionals to fix it as soon as possible.

The post How Many Years Should A Dishwasher Last? first appeared on HVAC Repair, appliance repair.

The post appeared first on Express Appliance Repair

It’s probably not necessary to remind you not to put your fingers down a garbage disposal unit, but here’s a friendly reminder anyway. It’s not going to remove your fingers or make hamburger of your hands, but it can bruise you up pretty well if you switch it on when you’re reaching in there, or if you dislodge something that’s impeding the impeller. The impeller forces materials against the sides of the cylinder, which are designed to present cutting surfaces to reduce what’s put inside into drain-friendly bits that pass through the perforations and down the drain.

1) No Power

If you activate the disposal and don’t hear any hum from the motor, chances are there’s an issue with power getting to the unit. Some of us don’t use the disposal very often, so, taking care to run some water, make sure that you’re hitting the right switch.

If you are certain that you’re hitting the right switch, but still getting no power, make sure that the unit is plugged in. It sounds pretty basic, but appliance servicemen report that this is the most common problem that they encounter.

If it’s properly plugged in, and there’s no power, the next thing will be to see whether the reset has tripped. Generally, this will mean that a small red button on the bottom of the disposal has popped out a small distance. Press it back in to re-engage the mechanism.

If that doesn’t fix the problem, check to see whether the circuit breaker serving the disposal has itself tripped, and reset it if necessary.

If you’ve eliminated those causes, it’s possible that there’s a problem in the switch itself. Make sure that you have switched off the proper circuit breaker before you pull the switch, generally on the wall or under the sink.

Pull the switch out and inspect the wires. It may be that one of them has detached, in which case the fix is simply to reattach it. Or it may be that the contacts have become oxidized, in which case some contact cleaner and a scrub with steel wool should set things right.

Make sure to switch on at the main service panel before testing. If your disposal still doesn’t work, a new switch may fix the problem inexpensively. It’s worth a shot trying.

If your disposal still doesn’t work, it may just be time to get a new one. Naturally, if you are uncomfortable with any of the above steps, it’s best to call in the guys from Dave’s appliance to check things out for you.

2) You Hear the Motor Hum, But the Disposal Doesn’t Grind

Probably the flywheel is jammed, though usually this trips the reset button pretty quickly. You don’t want to have the motor trying to move a stationary flywheel for long, because this can quickly damage the motor.

Almost always, there’s some object stuck in the unit that’s preventing its operation.

For starters, shut off both the wall switch and the circuit breaker. You don’t want to accidentally bump the switch and have it start up when you’re trying to remove something from the grinding chamber.

You should have received a special offset wrench with your unit. If you’ve misplaced it, a large hex wrench may suffice. Insert the wrench and turn it clockwise to release the flywheel/impeller assembly. You should feel it begin to turn freely. If you don’t have a wrench that will work, a local seller of your brand of disposal may be able to get one for you.

You can also try your luck with the wooden handle to one of your kitchen implements. Again, you should feel the flywheel unstick and begin to move freely if you can move the impellers clockwise.

Get a flashlight and get a good look into the chamber, if you can. Remove any foreign objects or debris with a needle nose pliers or similar implement.

Switch power back on at the mains, hit the reset button, run some water and hit the wall or under-sink switch. Anything left should be easily disposed of by the unit.

If it’s still not working, it’s time to call Dave’s appliance.

Leaks

Leakage at the Flange

The most common leak issue develops at the flange, because the vibration of the disposal motor loosens the seal.

Turn off the power at the mains before anything else.

You should see a mounting ring. Turn the disposal counter-clockwise from the bottom to loosen it and detach it from the ring.

This should expose 3 bolts that secure the flange to the sink. Tighten them.

If the bolts don’t seem loose, it could be that the plumbers putty that helps make the seal has deteriorated or come loose. Loosen the bolts and push the flange a little ways above the sink to provide room to bead on some new putty (it’s best to remove what you can of the old). Retighten the bolts and wipe away any excess with a rag.

Reinstall the disposal unit on the mounting ring, switch on at the service panel.

Run some water and check for any leaks.

Leakage at the Dishwasher Connection

Often dishwasher wastewater is discharged into the garbage disposal. Check to see whether the clamp has loosened up and tighten it down. If it’s not the clamp, it’s probably time to replace the hose.

Leakage at the Discharge Drainpipe

A rigid plastic pipe discharges water from the disposal to the sink drain trap. The issue may be with the gasket, and the treatment is the same as with the flange. Attempt to tighten the bolts, and if that doesn’t suffice to replace the plumber’s putty in the same way.

If the Disposal Drains Slowly

There’s probably some clogging. Disassemble the drain pipe and the trap, and remove any materials that may be impeding the flow of water and disposal debris. If you can’t find any, the problem is likely further along and needs snaking out with an auger.

A handy guide to what not to put down your disposal:

Bones are not generally a good idea.
Potato peels, pasta, or other starchy foods.
Grease.
Fruit pits.
Celery or other very fibrous materials.
Coffee grounds.
Egg shells.

As always, if you have any questions or need help, the friendly and knowledgeable folks at Dave’s Appliance are happy to help!

The post Troubleshooting Garbage Disposal Problems appeared first on Dave's Appliance Service.

There are lots of helpful videos out on the internet that can help with specific issues for specific models of appliances. Generally speaking, you should be able to get 10 years of use or so out of a good dishwasher before it’s time to replace it. That said, here are some of the most common easy-to-fix issues.

My Dishwasher Stinks!

It’s probably the filter. The filter sits at the base of the inside of the dishwasher, and traps large food particles that might otherwise get into the mechanisms and gum up the works. It’s designed to be easily clipped in and out, and who among us (ahem) actually read the manual and kept to the suggestion of washing the filter out on a weekly basis?

If this little item of maintenance has somehow slipped your mind, scrubbing it up and replacing it will probably remove the odor. If it’s been damaged, it’s probably replaceable.

Not Cleaning So Well

Might be time to unclog the spray arms! These are the longish, flattish plastic arms that spray and rinse the dishes and other items you put in the dishwasher as they spin about. They are designed to be unclipped, cleaned, and reinstalled. Don’t forget to clean the mounting while you’re at it.

Occasionally cleaning the spray arms can significantly improve the performance of your dishwasher.

Wobbly Rolling Basket at the Bottom

Replace the wheels. They are designed to snap on and off, and it’s certainly worth avoiding the hair-pulling frustration of trying to coax the thing in and out if it’s bothering you.

Detergent Dispenser Broken

Another item that’s generally easily replaced, if your unit isn’t too old, is the detergent dispenser. This is going to be a more involved fix, because the front panel of your dishwasher is going to have to be unmounted, electrical connections undone, and everything replaced. This is one of those situations where you may want to view an online video, especially if it treats your specific model, and to have all the tools you need immediately on hand. Naturally, if you have qualms, it may be best to call the experts at Dave’s.

Replace the Hoses

The fill hose brings water into your dishwasher, and the drain hose removes the wastewater. In time, these can corrode, degrade, or get clogged, reducing the performance of your dishwasher. It’s usually possible to get replacements and not hard to install them yourself.

Dang Thing Leaks

Likely this is due either to faulty door hinges or door seals. Or it may have to do with the hoses, which we mentioned above.

If the door seems to drop heavily or seems misaligned, it could well be a hinge. You’ll need to remove the side panels to get a good look, and it’s a good idea to watch a video on replacing the mechanism. Also, it’s probably a good idea to replace both at the same time.

If you’re not that handy, it may be time to call in the skilled repairs folks at Dave’s Appliance.

Check the upper door seal, which goes from one side, around the top, and down the other side of the door. Usually a new seal costs $30 or so, and it’s not a hard job to replace it. The lower seals is another matter, since it involves disassembling the entire door, and is best left to the professionals.

Again, that would be one you’d want to call Dave’s Appliance about.

The Dishwasher Isn’t Draining Well

It’s probably the drain pump, located at the bottom of the appliance, that pushes wastewater out of the dishwasher and into the adjacent sink drain. Bits of food, chips of dishes, slivers of glass, and other material can get caught in the pump and prevent it from working efficiently. It’s not a hard job to disassemble and clean the pump, but it does involve tilting the dishwasher on its back and removing the baseplate.

The biggest challenge here may be in reversing the process of disassembly while reassembling the dishwasher. Documenting the process with cell phone pictures might help. Or, if it seems not in your wheelhouse, the experts at Dave’s will be happy to help.

More Advanced Problems

Water’s Not Heating Up

Could be the heating element has burned out. You’re going to need a multimeter for this one.

Lay the unit on its back. Remove the baseplate and anything else that might be blocking the element. Remove the wires to isolate it. Check it with your multimeter by touching to the terminals.

If a fault is indicated, replacing the heating element ought to do the trick.

Dang Thing’s Not Filling Up

Pretty much the same as above for the heating element, but this time you’re checking the water valve, located behind the back plate, near to the fill hose. Remove the wires, check with a multimeter, and replace if faulty.

Bleeping Thing Won’t Start

Disqualify the obvious first. Check to make sure it’s properly plugged in and that the circuit breaker isn’t tripped.

If you know your way around a multimeter, you may be able to track down the problem on your own and fix it. There are some useful videos available online that bring you through the troubleshooting process in a reasonable sequence. Otherwise, it’s time to call Dave’s Appliance.

And remember, a dishwasher that’s served you for 10 years has lasted pretty well. It may just be time to get a new one. The experts at Dave’s will advise you well.

The post How To Deal With the Most Common Dishwasher Problems appeared first on Dave's Appliance Service.

You have heard that making ice takes time, so you take your sweet time. You check your ice maker after a few minutes, and there is nothing. You come back after a few hours and still, nothing.

What could be wrong? You wonder.

A properly functioning ice maker should produce ice, so if yours isn’t, you have a problem you should address as soon as possible. To help you out, here are tips given by refrigerator ice maker repair experts on how to fix ice maker not making ice:

Check the water connections.

The failure of the appliance to make ice is most likely due to poor water connections. Since the connections vary depending on the refrigerator models, it’s hard to pinpoint where the connections are located, so check the instructions in your appliance’s user manual.

If you don’t have the hard copy manual, you can always download it online. Before you touch the connections, first confirm they are correctly in place and unobstructed.

Since you are inexperienced, avoid tinkering with connections in hard to reach areas as you can easily damage your appliance.

Check the power connections.

Sometimes you might get your pants in a bunch for nothing. You might think your appliance is faulty, but in a real sense, it’s simply switched off. Check the power connection to the ice maker. Is it switched off? If it is, switch it on.

Check the water supply line.

If you can see the arm swing into motion accompanied by a buzz, and yet the appliance isn’t making ice, it means the water valve is asking for water that isn’t arriving.

This often happens when the valve and the solenoid function properly, but the water supply isn’t.

Check your appliance’s water supply that will most likely be located behind or beneath the refrigerator. Find the shut-off valve behind the fridge or under the sink, turn it off, unscrew the copper line from the back of the fridge, put the copper line in a bucket, turn on the valve and see whether water pours out.

Confirm whether the filter has clogged up

Like a furnace and other appliances in your home, the ice maker will fail to make ice if the filters are clogged up. A dirty filter reduces the amount of water getting into the ice machine, reducing the ice maker’s chances of making ice.

If you find out the filter is clogged, clean it following the owner’s manual instructions.

Check the tap valve

The tap valve is a small device that connects the ice maker’s water supply tube to the water pipe. In some cases, the valve develops problems, so water fails to get to the ice maker.

If you do the inspection and find the valve malfunctioning, replace it together with the inlet valve. When undertaking the replacement, go for a valve that requires you to drill a ¼ inch hole instead of the self-piercing type.

You can purchase the connection kit and work yourself or hire a repair professional to do the work for you.

Take a look at the solenoid.

The solenoid attaches to the water line at the back and bottom of the fridge then travels to the ice maker. Sometimes the solenoid gets defective or fails to receive power resulting in plenty of problems.

Inspect the solenoid, unplug the refrigerator, and then remove the sediment screen inside and flush it with water. While at it, take a look at the seals and confirm they are in perfect working condition.  If not in good shape, replace them.

Look out for a frozen line.

It’s common to have a frozen water line, especially if you live in icy areas. To fix the frozen line, unplug the fridge, then locate the shut-off valve, often located under the sink or behind the fridge.

You should then turn the valve to the closed or off position then fill the turkey baster with warm water. You can also defrost the line with a hairdryer or by letting the fridge sit unplugged for at least two hours.

If you do this and still the ice maker doesn’t make ice, ask an experienced commercial appliance repair Northern VA professional to inspect the appliance. It might be having a more serious problem.

The post How To Fix An Ice Maker Not Making Ice first appeared on HVAC Repair, appliance repair.

The post appeared first on Express Appliance Repair

Although the dishwasher isn’t dead silent when running, it’s not supposed to be too noisy that you are bothered when cleaning your dishes. Is your dishwasher making noise? It means you have a problem that you should address as soon as possible. Here are some of the common dishwasher noises as given by dishwasher repair professionals and how to get rid of them:

Grinding noises

A light grinding noise is no problem, and you have nothing to worry about if your dishwasher is making it. However, if the noise starts immediately, you may have to hire a contractor and ask them to check inside the dishwasher as the drain impeller’s plastic blades might be having a problem.

The dishwasher uses the blades to break up large food particles, and sometimes things stick on the plastic blades leading to a grinding noise. If the contractor inspects the blades and there is nothing there, the noise could be coming from the water inlet valve.

Check the valve for clogs and if clogged, clean it. Also, check whether it’s damaged and if that’s the case, replace it.

Banging

Are there non-rhythmic banging sounds inside your dishwasher? In most cases, they are as a result of spray arms hitting the dishes. The arms will cause the bang sound, and since the arms rotate in a circle, the bang sound will have a certain rhythm to it.

To fix the rhythmic sounds, you have to adjust the dishes, but if the sounds aren’t rhythmic, you might be having a water hammer problem.

When a water hammer happens, the dishwasher valves close, forcing the water behind it to rattle the pipe. You need to hire a plumber to help you find the cause of the water pressure issue and install the adjuster to ensure you don’t burst a pipe.

Did you recently install the dishwasher? The banging sounds might be due to the drain line thumping against the cabinets or wall during operation. Ask the dishwasher technician to look into the issue and readjust it accordingly.

Rattling

In most cases, a rattling sound is due to improper placement of the dishes. A small cup might be jostled by water, you might be having a loose fork, or the plates are touching each other. If you do the inspection and the sound isn’t due to improperly placed dishes, take a look at the motor.

If the motor is faulty or on its way out, it’s normal for it to make rattling sounds. You can test whether the problem is due to a faulty motor by running an empty cycle where there is nothing left but the motor itself.

While at it, take a look at the filters and drains for solid objects that might be causing the rattling.

If everything checks out and you still have the rattling sounds, chances are you have a water hammer in your pipes. Ask an experienced professional to look into the issue and fix it.

Clicking

Clicking sounds are normal when you switch on the appliance, but if the sounds are too loud, you might be having a problem that you need to address.

Clicking sounds are often brought about by small items such as seeds bouncing around. The noises will also come about if you recently made repairs, such as replacing an O-ring. If the repair professional didn’t properly replace the O-ring, you are bound to have clicking noise as the ring moves.

Humming

Humming is the normal sound of a dishwasher in operation, but if you hear louder noises than normal or high-pitched, you will need to look further into them. Take a look at the motor or the fan.

If the humming is happening during a drying cycle, the noise is most likely coming about due to a faulty fan, but if the humming is happening during any other cycle, the motor is most likely the culprit since the fan is only used for drying cycles.

Squealing

Squealing sounds are common with new appliances as the dishwasher is yet to get used to the job. If your dishwasher is new, appliance repair Northern VA experts advise you to relax as the noises dissipate with time. However, if you have had your appliance for a long time, check the motor, water inlet, or pump for damage.

The post Is Your Dishwasher Making Noise? Dishwasher Repair Experts Explain Why first appeared on HVAC Repair, appliance repair.

The post appeared first on Express Appliance Repair

The reason you installed a glass cooktop is that you enjoy the design aesthetics of the cooktop. While the cooktop is elegant and a great appliance to have, it often easily develops scratches that give it a cheap, dingy look. You don’t want this, do you?

To restore your cooktops to their original glory, you have to remove the scratches. The beauty of it is you don’t have to hire cooktops repair professionals to remove the scratches as you can easily do it on your own at home.

Want to learn how to do it?

Here are ways on how to remove scratches from a glass cooktop stove:

Baking soda

The good thing with baking soda is that it’s easy to find, and when properly mixed, it’s not dry or abrasive. To eliminate scratches using baking soda, make a loose wet paste by combining baking soda with water in a small container.

You should then apply the paste directly to the affected area using your fingers, then using a soft cloth, buff the scratches in a circular motion. Once you are done, wipe away the paste using a clean, damp cloth.

Toothpaste

Toothpaste sounds like an odd choice, but it contains several valuable ingredients, such as baking soda and peroxide. These ingredients buff out small abrasions without damaging your cooktops.

Begin with getting whitening toothpaste and two soft cloths. Squeeze a small amount of toothpaste onto a soft cloth, then apply it to the damaged area. Rub it in circular motions for at least one minute, then use a wet cloth to wipe out as much toothpaste as possible.

To clean up any leftover liquid, wipe the stovetop with a dry cloth. Repeat this process until you get your desired results.

Metal polish

You can use some metal cleaners to get rid of glass scratches. The cool thing is the metal polish removes scratches and scuffs and at the same time polishes the stove.

To get rid of scratches using this method, you need a soft cloth, glass safe metal polish such as Brasso, and a wool pad. Begin with pouring the cleaner on your cloth pad, then gently buff the scratched or scuffed areas by moving the pad in a circular motion on the affected area.

Once you are done, use another damp clean piece of cloth to remove the cleaner. For best results, dry the area with a separate soft cloth.

Nail polish

You need to combine clear nail polish with glass polish to get rid of scuff marks and scratches, leaving you with a clear, shiny stovetop. To get rid of the scratches using this method, use glass polish, clear nail polish, and a light buffing pad.

Use a brush to cover the scratches or the damaged areas, then wipe away any excess polish before it dries, so it doesn’t stick to the stove. Allow the remaining polish to dry for 30 minutes, then using a non-abrasive pad, gently buff each area with nail polish for at least 30 minutes.

Once you are done, place a small amount of glass polish on the buffing pad and touch up the areas you just worked on. When done right, this will hide even the worst of the scratches.

Glass repair kit

You might have the impression that the glass repair kit will be harmful to the finish on your cooktop, but this isn’t the case. Get a glass repair kit and multiple wool pads or soft cloths.

Then follow the instructions given on the repair kit to remove the annoying and embarrassing scratches.

Valuable tips when removing scratches

As much as you want spotless cooktops, you shouldn’t scrub the cooktops with abrasive materials as you will scratch the surfaces, causing more damage and dulling the surfaces further.

To prevent scratches, appliance repair Springfield professionals recommend always checking the bottom of pots and pans before using them. Remember, any burned-on food particles are more than likely to cause damage to the cooktop.

Also, never move the pan back and forth on the glass stovetop, as this will cause scratching. Some people argue that cold pans don’t harm the stovetop, but this is a lie. Any pan has the potential to scratch your surfaces, whether hot or cold.

The post Cooktops Repair: How To Remove Scratches From A Glass Cooktop Stove first appeared on HVAC Repair, appliance repair.

The post appeared first on Express Appliance Repair

Fridges don’t come cheap, and when you buy one, the last thing you want is to damage it. As a homeowner looking to have your fridge for as long as possible, you must be wondering, what can damage a refrigerator? According to refrigerator repair experts, the fridge can be destroyed by plenty of things that include:

Overstocking the fridge

This often happens when you come back from the grocery store. Since you don’t want any fresh groceries to spoil, you put everything in the fridge, which is wrong. When you put more items than the fridge can handle, you make it difficult for the refrigerator to regulate the interior temperature and keep the insides of the appliance cool.

This provokes the appliance to work harder than it should, putting a lot of strain onto the compressor and condenser coils, which puts the fridge at the risk of overheating.

How can you prevent this from happening?

As you are putting your groceries in the fridge, leave enough room for air to circulate freely, so you aren’t overburdening the appliance. A good rule of thumb is to keep your fridge 75% full.

Another great idea is to remove the old food before you go grocery shopping. This way, you always have enough room to stock the new fresher items.

Failing to clean the fridge regularly.

People rarely clean their fridges either due to their busy lifestyles or ignorance. When you let food spills and other debris accumulate, the refrigerator seal, compressors, and other parts degrade and crack.

This results in the fridge working too hard to cool the interior, which not only leads to an increase in your electricity bill, but the fridge also has a short lifespan.

Thankfully, it’s easy to fix this problem. Clean the fridge at least once every two weeks and when doing it, clean both the inside and outside of the appliance.

You store the food improperly.

It’s one thing to overstock the fridge and an entire ballgame to improperly store the food. For example, you will be storing the food improperly if you move the hot leftover food directly from the dinner table to the fridge.

In addition to the food spoiling, it can also spoil the fridge. This is because you expose the fridge to too hot food, forcing it to work harder than it should.

You can avoid damaging your refrigerator this way by giving your leftover food time to safely cool on the counter then carefully place it on your fridge.

Failing to replace the water filter frequently enough.

If your fridge has an ice and filtered water dispenser on the refrigerator door, you should regularly clean the filter to keep your drinking water and ice-free of contaminants and prevent sediment from building up in the pipes.

When you have debris in your pipes, your fridge works harder than it should; hence you have a high energy bill at the end of the month. Also, the fridge has a short lifespan due to its overworking.

Replace the water filter at least once every six months to keep your fridge in top working condition. You should note that even if you have an ice maker and no water dispenser, you still need to change the water filter to have peace of mind, the ice is free of pollutants.

Failing to inspect the fridge regularly

Like any other appliance, you need to inspect the fridge routinely. You can inspect it by yourself or hire a technician to help you.

Most people will inspect the other parts and forget a vital area—the door seal. When you don’t inspect the door seal frequently enough, it deteriorates, gets brittle, and cracks. This causes it to break down, and it doesn’t properly seal in the cool air.

As you might guess, this leads to a massive loss of energy as the fridge has to work harder to maintain a cool interior.

Whether you are doing the inspection by yourself or you have hired an appliance repair Fairfax professional to do the work, pay attention to the door seal, and look out for any signs of wear and tear or cracking. If your door is no longer resisting as much as it should when opening it, and the suction feels week, it’s time to replace the seal.

The post What Can Damage A Refrigerator? Refrigerator Repair Experts Answer first appeared on HVAC Repair, appliance repair.

The post appeared first on Express Appliance Repair

Having a refrigerator is simply a blessing because you get the opportunity to store food regularly. Moreover, it becomes your ultimate savior in summer since you will need a constant supply of cold water or other drinks.

But what will happen if your refrigerator is not functioning properly? This question is common, and it had happened to many people around the world. The good news is that you can get it fixed with the help of a repair servicing company near your area.

From the following article, you will get all the information regarding this. Additionally, with the help of this knowledge, you can be a step ahead of the future problem.

Refrigerator repair service near me

The first thing that you can do is type ‘Refrigerator repair service near me‘ in Google, and then, you will find lots of service providers near your location.

According to your understanding, you should go through all of their dedicated websites and note down their pros and cons. Based on the information, you won’t have a problem with eliminating some of the unnecessary ones.

After you finish filtering, consult with your chosen ones and talk with them regarding various issues. Ask them whether they are capable of providing efficient and fast repairs or not. Since your appliance will be providing you service, in the long run, it is mandatory that you should keep this thing into consideration.

If your settings are either commercial or residential, don’t worry because most of the companies can work for both purposes. But still, make sure you clear out with them in the first place.

It is mandatory that you look for certified-technicians and highly skilled ones, or else your refrigerator will be in jeopardy. After all, you will prefer a professional to get your job done, right?

Finally, check their customer reviews and find out all the positive and negative sides. That way, you will get an idea about the results you can derive from them.

Samsung refrigerator repair near me

If you live in Huntsville, AL, and you have a Samsung refrigerator, you can get your solution by typing ‘Samsung refrigerator repair Huntsville AL‘ in the search engine.

Various companies will pop up, and you can go through all of them to check their repairing services. It won’t be a problem for them if your appliance is making noise or not keeping your food cold because their technician knows how to rectify this problem at all costs.

Whether you have a top freezer refrigerator, side-by-side refrigerator, or other types, it can get as good as new for sure if you select the right repairing company. Some common parts that could create problems are thermostats, replacement bulbs, defrost heaters, door switches, and seals, etc.

Due to this, different problems can arise. Some of them are:

• The appliance might fail to maintain a low temperature
• There could be a potential buildup of frost
• The refrigerator is not turning on
• Water is leaking continuously

The issues may come in different forms, so it will be best that you take action immediately.

No matter what kind of malfunction you encounter, the experts will always be ready to serve you. After you are satisfied with their work, you will notice that the energy bills are decreasing a lot and the appliance’s performance has improved.

Ge refrigerator repair near me

Yes, if you are a Ge appliance user, then there are tons of companies that can solve your refrigerator problem. The way you can find them is through the internet. Simply go to your search engine and type ‘Ge refrigerator repair Huntsville AL.’ Within a second, you will get to see different companies to choose from.

To be on the safe side, check all of them, and find out which one fits your re-quirement. Some common problems that could arise from this brand are:

• The dishwasher is not functioning properly
• Crisper bins fill up with water
• Ice-maker is damaged
• There is a huge amount of frost present inside the freezer
• You can see the igniter is glowing, but there is not flame
• Stinky smell
• The water pressure at the dispenser is not high
• The refrigerator stays very warm all the time

If you experience this type of problem, don’t think twice and call the repairing service company. You need to solve this problem immediately, or else your appliance will get more damaged.

Fortunately, the professionals are confident enough to solve the problem on your behalf. When they complete the task, they will ensure that it is operating in its usual manner so that you don’t experience any problem in the future.

LG refrigerator repair service near me

As you know, the brand LG is very popular worldwide, but there is a possibility that its appliance will show problems at some point. People residing in Huntsville, AL, will find this section helpful.

Just visit your desired search engine and type ‘LG refrigerator repair Huntsville AL,’ and you are all set for the research purpose. You could get overwhelmed when you get to see lots of companies, but don’t worry; you can pick the winner with a proper filtering process.

Take some time out of your schedule and research their customer reviews. Also, analyze their services. With the information you find, you won’t have difficulty in getting your ideal one.

The professionals will arrive at your doorstep to troubleshoot the refrigerator prob-ems. For your ease, here are some of the common ones that you could face in your situation.

• You are experiencing constant irritating noise from the refrigerator
• It has a torn door seal
• Your floor and the internal portion of the appliance is getting wet due to the leakage issue
• It keeps the temperature high when the temperature needed is low

Other than these issues, some of the upgraded ones come with built-in microcomputers installed inside the appliance. This factor can become a headache without the help of an expert.

Conclusion

In total, your investment for the repairing service won’t go to waste as you are putting all the technology-related work on the hand of professionals. Don’t leave the refrigerator unchecked when you have faced these common problems. Leaving it for a considerable amount of time could harm it to the extent that you have to buy a new one.

So, finding the right company is not a tough job if you have all the information in advance. Go through these articles a couple of times so that you can get a good understating of all the areas.

If your friends or family members have gone through these same issues, consult with them and don’t forget to take advice.

Have a good day.

 

 

 6 total views,  6 views today

The post Refrigerator repair service in my area (Secrete Tips!) appeared first on Appliance Masters Repair Service.