If you have a refrigerator that has a water dispenser, this may be one of the best features of the fridge. At American Appliance Repair we find that too often, homeowners notice that the dispenser is not working any longer and just assume that it is too expensive to fix. Keep reading to find out simple troubleshooting options and then remember you can contact us at 800-640-9934 to have professional appliance repair.

Check the Dispenser Tube

If the issue involves a water dispenser
that is blocked or sprays water in a way it shouldn’t, then it is
likely that the dispenser tube is the issue. This is the small
plastic tube that goes from the water line to the dispenser in the
door and down to the dispensing assembly. Look at the plastic
end-piece that pours into your glass and make sure it is not damaged,
clogged, bent, or otherwise in need of repair.

Clean Out the Water Lines of Your Fridge

When your issue is related to low
pressure, lack of water, or irregular dispensing, then it could be
that you have a clog. This is likely if there is damage or another
type of flaw in the water line or if the water filter is old. Take a
look at your water line in segments. Check the components that run
water through the water line to see if there is a clog. You can
generally clean out clogs by running a mixture of baking soda, water,
and vinegar through your line.

Inspect Your Water Filter

Water filters are often the cause of
fridge troubles. Every fridge model has its own filter and filter
system. The way filters fit into the socket closes into housing, and
then there are clips into the water lines. If any issues are present
with any of these, the lack of water can be explained. If you have a
water filter that is twisted or clipped, the water flow will not be
even.

Likewise, it is
entirely possible that your water filter is simply too old. If you
have a bad water filter, it can leave an unpleasant taste in the
water. The fact that it stops filtering can also lead to a clog in
the line caused by the minerals that are supposed to be filtered out.
If you have not changed your water filter in the last six months,
then it is likely you need to do so.

Make Sure Your Water Pressure is Right

If you are just getting a trickle out
of your water dispenser then it could be an issue with water
pressure. You can test this at a number of points to track down where
the problem is. Begin at the water line in the wall where water comes
into the dispenser. If there is no water pressure there then this
explains the issue.

The post Do You Have Issues with Your Refrigerator’s Water Dispenser? Try These Troubleshooting Options appeared first on American Appliance Repair.

Dear Customers, 

Like so many of you, we have spent the last several days and weeks learning about the Coronavirus (COVID-19) and how it is impacting our world. For Sarah’s Appliance Repair, that means understanding how it affects our employees, customers, and communities, and then making the necessary adjustments to our work and operations. 

We have one simple objective that guides us: Keeping you and our employees safe. This has been at the center of our conversations every step of the way. We want to keep you safe and limit the possibility of anyone catching the virus. With that in mind, we have made several moves in our business in response to the threat of the coronavirus. 

CLEANING 

We have ramped up cleaning services for each of our technicians. We are increasing our daily cleanings two more times each day. Technicians are required to wipe all tools and equipment down before and after entering homes. Every tech has hand cleaning gel and Clorox wipes on hand. We will be washing our hands after every customer interaction and we will wipe down every appliance that we touch. We have implemented a policy of not shaking hands to protect you and our employees. 

CDC GUIDELINES 

We are closely following the Centers for Disease Control’s (CDC) guidelines and recommendations on the steps we can take to help prevent the spread of the virus. We have shared specific instructions with our employees on the importance of washing their hands and staying home if they feel sick or are returning from an area of the world identified as posing a coronavirus-related risk. 

TRAVEL 

Per CDC recommendations, we will ask employees who have traveled to high-risk locations or have been exposed to others who have traveled to such locations to self-quarantine for 14 days. 

To further help prevent the spread of the illness, a strict travel policy is in place for our employees, and we have canceled meetings with large gatherings. 

ONGOING REPAIRS AND SERVICE 

If you don’t feel well or choose to cancel your repair, of course, we will be ready to serve you when you reschedule. 

We know that many of you have scheduled in-home repairs with us. If you have any concerns, we will be happy to work with you to reschedule your appointment at no additional cost. Simply call 505-688-4005 in New Mexico or 208-534-7222 in Idaho, and we will take care of it. 

We will continue to closely monitor the situation and do all we can to protect you and our employees. 

Thank you, 

Sarah

The post Coronavirus (COVID-19): What Sarah’s Appliance Repair is doing to prioritize your health. appeared first on Appliance Repair New Mexico.

One of the mistakes homeowners make is hiring dishwasher repair professionals to repair an appliance that has passed its lifespan.

It’s pointless to keep on repairing an aged appliance as you will be wasting your money, and it will never work efficiently. If you are wondering how long does a dishwasher last, you should expect it to last for 9-11 years.

Things that affect the lifespan of the dishwasher

The lifespan of the appliance will be heavily influenced by these factors:

Frequency of use: How often do you use the unit? In an average home, the dishwasher is cycled five times a week. If you use your appliance more than this, it will most likely have a shorter lifespan and vice versa.

Quality: Reputable brands make high-quality appliances that last for years, so if you have a high-quality appliance from a reputable company, it’s bound to have a long lifespan. A machine from a reputable company also tends to develop fewer problems during its lifespan.

Maintenance: Periodic maintenance, such as cleaning, can significantly affect the lifespan of your unit. If you properly maintain your unit, it will have a longer lifespan and vice versa.

Price: Although, the price of the unit isn’t a very reliable factor, it can guide you on how long it will last. A poor quality appliance goes for a much lower price, so you can expect it to have a shorter lifespan than an expensive one.

Tricks on how to extend the life of your dishwasher

To avoid having to replace your dishwasher after a few years, you need to take good care of it so that it lasts for a long time. Some of the things you can do include:

Keep it clean: Everything begins here. Just as your car won’t last for long if you keep it dirty, your dishwasher also won’t last for long if you don’t clean it often. Routinely wipe down the door seals using warm water, mild soap, and a soft cloth.

If you notice any foul smells in your appliance, work at getting rid of them as much as possible.

You also should regularly clean the filters that capture food particles. When cleaning, also inspect the filters and ensure they aren’t damaged such that they are allowing food to pass into the internal parts.

It’s normal for the sprayer arms to clog up when you don’t clean them as often as you should. To improve the washing experience, get rid of all the debris from them.

Be on the lookout for hard water residues: If you live in an area with hard water, thin films of hard minerals settle on the inside of the machine causing discoloration. This not only gives the dishwasher a cheap look, but it also significantly reduces its efficiency.

You should clean the dishwasher using a citric-based cleaning solution to get rid of the film. Also, consider adding regeneration salt to the water softening system to prevent the hard water from clouding, spotting, or minerals building up.

Use hot water: When cleaning the dishes, avoid using cold water—use hot water instead. The water not only makes the detergent more efficient, but it also kills germs, odors, and bacteria.

Don’t overload: On the verge of saving time, some homeowners stock the dishwasher more than it should. Don’t do this as it results in poor cleaning of the dishes. It can also cause undue strain on the dishwasher; hence it doesn’t function efficiently.

When placing the dishes, don’t stuff them in. Carefully load them in their correct areas. If any dishes are out of place, don’t force them. Simply leave them for another cycle.

Conclusion

A properly maintained dishwasher should last at least ten years. You can make your unit last longer than this by putting the above tips into action. When the unit develops problems, don’t hire just any contractor to repair it.

Take your time and find a reputable and certified appliance repair Springfield professional to do it. You can verify they are reputable by taking a look at their experience and track record. Also, confirm with the regulatory bodies and confirm they are allowed to offer their services in your local area.

The post appeared first on Express Appliance Repair

When you bought your dryer, you likely did so with the hope that it would last for years to come. At American Appliance Repair we want to increase the chances that it will. That is why we have provided many dryer use and care tips. Keep reading to learn five things not to do if you want your dryer to keep on keeping on. Then contact us at 800-640-9934 if you do need professional help.

1. Do Not Leave the Lint Trap Unclean


All too often, we see people cleaning the lint trap “once in a while.” Even when they intend to clean it more often, this sometimes turns into a habit and it is forgotten about. There are many reasons to clean out the lint trap. Most importantly, when the lint screen is full it can be a fire hazard and can result in poor energy efficiency.

2. Do Not Forget to Check the Venting Tube


You do need to clean out the lint trap regularly but you should also ensure that your venting tubes do not have debris clogs. This should be done a few times a year. Remember that these tubes allow heat to get out of the dryer and your laundry room. In extreme cases of clogging, dangerous situations are possible – including fire.

3. Do Not Let Your Dryer Stand on Uneven Ground


Your dryer needs to be level in order to function well. If you are not sure if the floor below your dryer is level, use a leveling device. If you find that it is not, then you need to check the manual for your washer to learn how to adjust the feet of your dryer. When it’s in a more stable position, it will work better and last longer.

4. Do Not Use Too Many Dryer Sheets


We’ve seen many people make the blanket statement that dryer sheets are not safe to use in dryers. This is far from true. However, if you use too many dryer sheets, you could be causing an issue. This occurs when too many sheets are used at a time and the very chemicals that are supposed to soften the fabric leave behind a residue – which leads to clogs. Use only one sheet per load and wipe down the inside of your dryer once in a while.

5. Do Not Install Your Dryer in Too Small of a Space


If you have found a small broom closet or another area that barely fits your dryer, we are sorry to say that it does not actually fit your dryer at all. Your dryer needs room to allow air to circulate. If it is in too small a space, you run the risk of fire or malfunction.

The post 5 Things You Should Never Do if You Want Your Dryer to Last as Long as Possible appeared first on American Appliance Repair.

The dishwasher experiences plenty of problems that not only make it hard to wash your clothes, but also end up damaging your clothes. You can solve some of the issues by yourself while others require you to hire a washer repair professional.

Are you wondering, what is wrong with my washer? Here are some of the most common washer problems and how to solve them:

Washer vibration

Does your washer vibrate when cleaning? This is a common problem when you use an unleveled appliance, you load an unbalanced laundry, or you use a machine that isn’t in contact with the floor.

For you to fix this problem, ensure that the washer feet are firmly in contact with the floor. You should level or balance the washer and tighten the jam nuts so that the legs and feet don’t shift.

Also, check the floor for sagging. If it has sagged, add a piece of plywood under the washer to keep it level.

If the laundry is loaded unevenly, rearrange it and load it correctly to avoid the shifting. If you are mid-cycle, pause the cycle and spread the clothes through the drum. Evenly distribute the weighty items such as towels and heavy garments, so there isn’t just one heavy clump being spun around.

Leaking water

Your appliance will leak due to many reasons. One of the most common ones is if the washer isn’t level or properly loaded. It will also leak if the hoses aren’t tightly attached or the hose washers are worn out or improperly inserted.

The first thing you should check is whether the appliance is properly balanced. If not, you need to balance the washing machine. You also should confirm whether the washer basket is out of alignment, causing the water to splash out.

Go around all the hoses and tighten the connections. Ensure that the hose washers aren’t cracked or broken. Also, confirm that they have seated properly in the hose.

Also, pay attention to the water lines and faucets. Are they leaking? If they are, seal them.

You also should confirm that the washer is draining properly, and the drain hose isn’t clogged with hair, lint or a wayward sock.

Using the wrong detergents can also cause the machine to leak, so check the detergent you are using. If you have been using the wrong soaps, the chances are that you have excess suds that could be causing the drum to overfill and leak.

If the leak is small and coming from the front of the machine, it might be coming from the door. This leakage could be due to a seal that might have worn out due to age. To fix the problem, reapply the seal.

Washer making a lot of noise

While the appliance shouldn’t be dead silent, it shouldn’t be too noisy either. In most cases, the appliance will make a lot of noise when there are foreign objects inside, or a part inside has gotten loose.

Different noises come about due to various reasons. For example, gurgling noises indicate something obstructing the drain line. All you need to do is to remove the blockage and prevent it from becoming a full-blown clog.

Is your appliance making clicking sounds? The sounds are often due to objects lodged in the washer drain. The chances are that you missed removing a coin or any other item from the pocket. You need to simply check the drains and remove the foreign object.

If your unit is making humming or buzzing sounds, you might be having a foreign object lodged in your pump. A foreign object tends to jam the system. If the damage is extensive, you have no way out other than to replace the pump. If there is no damage, removing the object is enough to fix the problem.

Bad smell coming from the washer

Even if they are designed to clean clothes, they also get dirty, and when you don’t clean them early enough, they start smelling. The smell is also transferred to the clothes, and you end up having to rewash them.

To fix the problem, you simply need to wash the washing machine. Also, ask an experienced appliance repair Fairfax professional to look around for mold and mildew growth as you might be having a problem with excessive moisture.

The post appeared first on Express Appliance Repair

Have you noticed that your washing
machine has a bad, sour smell? Does the smell stick around even when
there is nothing in your washing machine? There are a number of
reasons that this could be happening. Some may require professional
washing
machine repair. Others can be fixed quickly and easily at home.
Learn the steps you can take to try and handle the issue on your own.

Front Loading High-Efficiency Washers Are Prone
to Bad Smells

While there are many advantages to
front-loading, high-efficiency washers, the truth is that they often
develop a sour smell and this smell can just get worse as time goes
on. This is an unfortunate side effect of the sealing technology that
is needed for it to be front loading. These washers have to seal 100%
when they are closed, otherwise water would leak on the floor.
However, these seals also prevent air from circulating and drying the
washer between uses.

The seal itself is thick and made from
rubber, and can fold over to become the perfect place for water to
puddle – which eventually makes for a great place for mildew to
hide. When a front-loading washer does not dry time after time,
mildew problems can continue and sour up the washer – even when
there is no water inside it and no water being washed. There is
nothing wrong with the washer, other than the dampness lets mildew
grow. The good news is that there is a relatively simple solution.

The Solution is Simple: Kill the Mildew and
Improve Airflow

The first step to take if you have
mildew that’s already present in the lines is to kill it. There are
a few ways you can do so. First, you may try running very hot water
with a mixture of white water and borax granules in place of
detergent. Vinegar works because it is anti-fungal, while borax is
sharp on a molecular level which can scrub away and kill mildew
causing the bad smell.

To prevent the smell from returning,
you want to increase airflow. If you do not have pets or small
children, you can simply leave the door open once in a while.
Otherwise, take a few seconds to wipe out the rubber seal each time
you use your washing machine.

We Can Help with the More Complicated Repairs

If this does not solve the problem, or if you have other issues with your washing machine, contact American Appliance Repair at 800-640-9934 to learn what your options are. We have many years of experience working on all makes and models of washing machines, dryers, dishwashers, and much more. If you have an appliance that is in need of care or repair then you have found the right company to work with.

The post Learn How to Get Rid of a Bad, Sour Smelling in Your Washing Machine appeared first on American Appliance Repair.

Microwaves make your life so much easier. But if the turntable inside the microwave stops functioning, then it’s likely the food will not cook evenly. There are a number of reasons your microwave tray may stop spinning. In this post, we will examine each potential cause and how you can fix it.

 

Interior Debris

Sometimes when you microwave food, food particles can splatter all over the interior of the oven. It is possible for them to become encrusted on the tracks of the roller guide or the coupler. The solution is extremely simple: thoroughly clean the interior of the oven.

Remove the round, glass microwave tray and the roller guide; check to make sure that there is no stuck-on food that might inhibit turning

Wash in warm soapy water

Wash out the interior of the microwave

Replace roller guide and tray

Test it out and if your tray turns, you’ve solved the problem!

 

Roller Guide

If a thorough cleaning doesn’t do the trick, the issue may be with the roller guide. The roller guide works with the coupler to rotate the turntable. It has a center part that fits on the coupler and then the outer circle guides it along the track. When you take the roller guide out to clean it, make a comprehensive inspection of it.

Examine the wheels on the guide to ensure they turn freely with no resistance

Look for any signs of wear, cracking, discoloration, or damage

Look at the fitting for the coupler; any cracks or damage may mean that it is not engaging properly

If you find any issues, you will need to have a replacement roller guide.

 

Coupler

The coupler is the center piece in your microwave oven that attaches to the drive motor below. It connects to the roller guide as well. If the coupler is damaged, then the energy from the drive motor is not being transferred to the roller guide. Here’s how to figure out if the coupler is the culprit.

Disconnect your appliance from the power source

Locate your drive coupler – in most models, that means removing the tray and roller guide; in some models, you will need to remove the motor from the floor of the microwave to find the coupler

Remove coupler – most models will have a three sided coupler that will just pull off of the motor shaft.

Examine coupler – it normally has a D shaped opening that fits tightly onto the motor shaft and you should look for cracks, discoloration or wear

If you identify any issues, you will need a replacement drive coupler.

 

Drive Motor

The drive motor that powers the turntable is located in the floor of the microwave. If you have eliminated all of the causes above, you will need to check the drive motor. This is a more extensive undertaking and you may want to contact the experts at Dave’s Appliance. If you decide to tackle it yourself, then you should be prepared with a multi-meter and other tools.

Disconnect your appliance from the outlet

Remove drive motor – you will need to remove the cabinet in order to get at it, and then disconnect the wires and retaining screw

Test drive motor – using a multimeter set to the highest setting, test for continuity by touching the probes to the terminals; you should receive a reading of zero if your motor is functioning properly.

If your test results aren’t zero, or if your microwave makes grinding noises, then you may need a replacement drive motor. Dave’s Appliance can help.

The post Microwave Not Spinning? How to Fix a Microwave Tray that Won’t Turn appeared first on Dave's Appliance Service.

You know how important it is for wine to be maintained at a specific temperature, minimizing sediment disturbance and maximizing taste. So when your wine cooler suddenly stops cooling, something needs to be done, and quickly.

The first thing to do is determine which type of cooling system it uses. A compressor system is the same technology as a regular refrigerator; a thermoelectric system uses the Peltier effect to lower temperature. The compressor system uses a refrigerant and relies on mechanical energy while the thermoelectric system pumps heat out of the interior using electrical energy. Here are common problems and their solutions for each.

 

Compressor System Problems

Condenser Fan

If the fan in a compressor cooling system stops working, other elements can overheat. In time, that heat can transfer to the interior of your wine cooler. Repairing the condenser fan may be as simple as eliminating built-up dust and debris. If that is not the problem and it is still not spinning freely after thorough cleaning, the fan needs replacement. It is possible to do so on your own, though you may want to call the professionals at Dave’s Appliance.

 

Broken Evaporator

If the evaporator doesn’t work, the unit won’t produce cold air even if the compressor is running properly at full capacity. The evaporator also uses a fan, and built-up dust and debris could be the culprit here too. Likewise, there may be some sort of ice blockage that would be apparent when you examine it. Repair may simply entail cleaning and letting the ice melt, then plugging it back in. If the blades of the fan are actually bent, it will need to be replaced.

 

Defective Thermostat

Your thermostat is responsible for the supply of power to the condenser, evaporator fan, and compressor. The thermostat must be properly calibrated to ensure that your wine is preserved in the best possible way. Unfortunately, a defective thermostat can’t be repaired; you’ll have to replace it entirely. While it is possible to do this yourself, it is best to call in one of the experts at Dave’s Appliance. The procedure itself is complicated and the thermostat is just too important to rely on your own amateur efforts.

 

Thermoelectric System Problems

Room Temperature

The Peltier modules conduct heat out of the cabinet in relation to the outside environment. If the room itself is too hot, the Peltier module can’t do its job properly. It is recommended that this kind of wine cooler should be kept in a room that doesn’t exceed 75ºF. The obvious fix to this situation is either to move the wine cooler to a cooler room, or to ensure that the room it is in never gets warmer than 75ºF.

 

Improper Ventilation

Because of the way it conducts heat out of the system, a thermoelectric wine cooler needs clearance from surrounding objects. Make sure that it is positioned away from walls and other objects, and never place things on top of it. If it is a countertop cooler, don’t have it near the toaster or microwave, which generates heat.

 

Fan Issue

Thermoelectric wine coolers also have a fan that conducts hot air out of the cabinet and it can easily disconnect. As with the compressor system fans, clean off any accumulated dust and debris. If it still doesn’t function, you may need to replace the fan.

 

Your wine cooler is an investment in keeping your wine at the optimal temperature. When it is malfunctioning, your wine is at risk. Dave’s Appliance can remedy the issue quickly and easily.

The post Wine Cooler Not Cooling? How to Repair Your Wine Fridge appeared first on Dave's Appliance Service.

You want your washer and dryer to last as long as possible. This requires regular professional maintenance as well as daily maintenance tasks you can do. Read on to learn what you can do at home and remember to contact American Appliance Repair when you need dryer repair or maintenance.

1. Clean Your Lint Screen Often

You should never let lint build up in your dryer. You may know that if there is too much lint a fire can occur, but that is actually very rare. While you obviously want to avoid that chance of fire, it is also important to get rid of any small amount of extra lint that is on the screen. Why? Because even that tiny bit of lint will cause your dryer to work harder to get clothes dry. As time goes on, this can affect how well your dryer works overall.

2. Do Not Put Dirty Clothing in Your Dryer

If you want the inside of your dryer to stay clean then you should not put soiled clothing into it. You should also only dry clothing that is wet because it has been in the washing machine. If you have wet clothing or towels for another reason, such as spending a day at the beach, they should be washed before they are put through the dryer. This prevents dirt, sand, and other debris from clogging up your dryer.

3. Wipe Down the Exterior of the Dryer

While you do need to take good care of the interior of your dryer, you should also be sure to keep the exterior clean too. Wipe it down at last once a week to prevent soap from corroding it. If you don’t, soap reside can not only make your dryer dirty, but it can get onto just-watched clothing and make them dirty.

4. Keep Your Dryer Vents Cleaned

One of the most important aspects of maintaining your dryer is regular vent cleaning. You should do a comprehensive cleaning of your vent or duct at least every six months. There are cleaning brushes made for this exact purpose. If you do not do this, and an obstruction occurs, the amount of air that gets to the dryer will be significantly reduced. This results in wasted energy and extended drying times. Over time, this can break down your dryer and shorten its life span.

Do you need help finding the right maintenance options for your washer and dryer? Do you want to work with an experienced appliance repair company that can assist you in repairs, installation, replacement parts, and much more? Then contact American Appliance Repair at 800-640-9934 at your earliest convenience.

The post 4 Maintenance Tips to Keep Your Dryer in Top Shape appeared first on American Appliance Repair.

You need kitchen appliances to execute everyday household tasks such as cooking, cleaning, and keeping the food fresh. When the appliances develop a problem, you have to hire an appliance repair professional to fix them.

Top-notch technicians don’t come cheap, so when your appliance keeps on developing problems, the fees charged by the contractors can quickly add up.

Luckily, you can reduce the frequency you hire contractors by taking good care of your appliances. How do you do this? Put these tips into consideration:

DIY oven/stove maintenance

Start with confirming that the door provides a tight seal. When the door is poorly sealed, the oven can lose up to 20% of its heat. This results in the food taking a long time to cook. The food can also cook unevenly.

To confirm the condition of the seal, open the oven door and find the gasket around the door perimeter. Are there any broken, deformed, or torn areas? If they are there, replace the seal.

You also should clean or replace the vent filters. To do it, wash the metal grease filters in soapy water or use a dishwasher. If your appliance has paper or charcoal filters, don’t wash them. You should replace them if too dirty or worn out.

Also, pay attention to the stovetop drip bowls. You need to clean them by presoaking them in a cleaning solution. You should then handwash and replace the bowls. Make a habit of cleaning the drip bowls immediately after spills. This is because if the spills burn into the bowls, you have to replace them.

DIY garbage disposal repair and maintenance

One of the most common issues you will have with your garbage disposal is the appliance clogging up now and then. The clogging comes about when you go for a long time without cleaning it. To prevent the clogging, clean the appliance.

To avoid injuries, ensure that the disposal is off before you begin the cleaning. When cleaning the garbage disposal, be on the lookout for both large and small items that might have got stuck in the unit.

Use tongs or any other tool to remove the blockages. Never use your bare hands for cleaning.

After removing any large items that might be there, pour a mixture of ice cubes and vinegar or salt down the drain. Wait for at least 10 seconds then run cold water over it. To remove any odors that might be there, place a handful of citrus peels in the disposal, run cold water and turn it on.

You should be cautious of the materials you allow down the garbage disposal. As a rule of thumb, avoid fibrous materials that have high chances of causing clogs.

DIY refrigerator maintenance tips

Dust, dirt, and pet hair tend to clog up refrigerator coils restricting airflow and causing the fridge to work harder to cool the food. Once or twice a year, use a vacuum to clean the coils and suck up any loose particles that might be there.

The location of the coils varies depending on the refrigerator model. Most of the refrigerators will have the coils behind the kick plate or at the rear.

In addition to cleaning the coils, you also need to change the refrigerator water filters. Water filters that don’t remove the contaminants and impurities expose you to harmful water so you should change them once every three to six months.

DIY dishwasher maintenance tips

While the dishwasher can gobble up and dispose of large bits of food, it doesn’t mean you should feed it a lot of it. When you allow a lot of food in the appliance, the appliance is bound to clog up or start functioning inefficiently.

To protect the appliance from working too hard, make a habit of rinsing off any unwanted foods from the dishes. Direct the large food chunks to the garbage disposal as it’s more capable of handling the waste.

You also should regularly inspect the dish rack tines. If they have rusted, they will ruin the dishes and silverware. To solve the issue, buy a tine repair kit then use a sealant to adhere the replacement tips over the chipped or rusty tines.

You don’t need to hire a dishwasher repair Alexandria professional to help you with this as you can easily do it by yourself.

The post appeared first on Express Appliance Repair