Awareness about every aspect of a product you own or are hoping to buy is very important. This happens including the warranty periods of whatever machines you have at home. It will also be smart to know about any repair shops nearby, which can help you if you are in a runt with your appliance.

However, it’s often common for a machine’s warranty not to include every part it consists of. Most of the time, the warranty varies according to the different pieces of the device. This is the case with the Whirlpool Washing Machines. The whole machine may have a specific time of warranty, but the rest will vary individually.

Warranty Distribution

 

Total Warranty

 

First of all, let’s discuss the complete warranty for the product. If operated correctly, according to all the proper instructions, there is a full one-year warranty on the washing machine. That is, of course, counting from the day of purchase. That means you will not have to worry for precisely one year if something goes wrong with the appliance.

Say, if I faced any issues with my appliance, that had not crossed its one year mark, I would first look for places that offer Whirlpool washer repair near me. It is imperative to find a corporation designated by Whirlpool because only then can I expect the company to bear the cost for my repairs.

If the selected one year expires, there is no way that the full cost will be paid for, but there are still other offers for different parts of the washer.

Second to Fifth Year Warranty

After the expiration of the first and total warranty, the second phase begins. This is when customers will receive privileges of the warranty from the second to the fifth year since the purchase. Of course, that no longer applies to the whole machine but only certain specific parts.

While the first one-year-long warranty stated that the Whirlpool corporation would bear the cost of repair and/or replacements of any parts of the machine, the latter does not do so. On the contrary, this warranty is very specific to certain parts, namely, the top, lid, and gearcase assembly.

Given that all the conditions are perfectly met and the machine was used precisely according to the instructions attached with the packaging, whatever replacements necessary with the top, gearcase assembly, or lid, will be taken care of by the Whirlpool Corporation.

This is, of course, only applicable if you contact the company, or find a repair place approved of by them.

Second to Tenth Year Warranty

Past the fifth year, the warranty for the parts specified above will expire, but not to worry, continuing from the second year. Stretching well through the tenth, guarantees concerning other components. In different manners will come to exist. This warranty is only specific to the outer tub of the washer.

After proper use and care, as stated in the user manual or instruction book that comes with the product, if the tub is found broken, damaged, unable to function properly, or hold water. It will be replaced or repaired according to the needs.

Likewise, the cost will be entirely borne by the Whirlpool corporation, given that the conditions are all met and the warranty has not expired.

Issues Whirlpool Corporation will Not Pay for

The warranty on washing machines provided by Whirlpool is very reasonable and covers a long period, but not everything is included. Even within the time frame of the warranties, there are certain events that the company will not take responsibility for.

It is also worth mentioning that these warranties are only limited to the United States, and no other additional country.For example, if you were not able to install the washer properly. You are asking for service to fix that, you will have to pay for this service fee.

Accordingly, Whirlpool will also not bear the costs of replacing fuses, fixing circuit breakers, house wiring, plumbing, or instructing users on how to use the washer. Warranties are only applicable when it is damaged.

Company Will Not Pay For Damage

On the other hand, any warranty is only valid if the users have used and installed the washer according to the user manual. The company will not pay for damages caused by accidents, wrong installations, abuse, or misuse at the hands of the customers. If that happens, the repair work is entirely the responsibility of the user.

For any repair work or replacements, you can contact suitable repair shops near you who can visit and fix the machine right at home. If you feel the need to transport the product, you alone must bear the costs for that. Whirlpool will also pay for only replacement pieces, or whatever costs are required to repair the machine.

This does not include the labor fees that may be required in the process.So, if you want your warranty to be applicable, use and install the machine from the start according to the manual.

Furthermore, look for any manufacture issues or damages right after the machine arrives at your doorstep. This way, you can inform the company as soon as possible if there is a problem.

Moreover, do not damage or let others damage the product, or you will lose your warranty rights forever. If you have to find a repairman or shop to fix your problems. Make sure you find a place close by so they can visit your house.

Say, if you live in Huntsville, you could look up affordable appliance repair around Huntsville, Al, and make sure that the shops are designated by Whirlpool.

Conclusion

The changes in warranty over the years and the many terms and conditions that come with them are some of the main reasons why users. Even buyers should know everything about the products they are buying.

Imagine that you are facing trouble with your washer, and thinking it is all paid for. But you have found that you are not applicable for the warranty you need for a simple mistake.

Therefore, it is crucial to read through everything carefully, and most of all, treat the product with care, so it lasts a long time.

 

98 total views, no views today

The post What is the Warranty on Whirlpool Washing Machines? appeared first on Appliance Masters Repair Service.

Whether you are preparing a holiday meal or simply cooking dinner, your kitchen stove will prove to be a very valuable appliance. Although the average stove lasts for around 15 years, it may still require servicing along the way. Here a few key signs you need professional stove repair in Milwaukee.

Constant Gas Smell

A constant gas smell should always cause some concern. Aside from increasing the risk of a fire, a natural gas leak creates excess carbon monoxide. For these reasons, you should not wait to call a qualified Milwaukee stove repair technician. Fortunately, the root of the problem is likely something that can be easily fixed. Often, a burned-out pilot light will cause a gas smell. To be on the safe side, open a few windows until help arrives.

You’re Starting to Notice Rust

You never want to see rust on your stove’s burners. However, repeated spills can easily cause corrosion over time. Not only does rust make your stove look bad, but it also creates an unsanitary cooking environment. Rust promotes the growth of bacteria. This problem will only worsen over time. While cleaning the burner is an option, replacing it is probably the most effective solution.

Burner Won’t Turn On

When getting ready to cook dinner, nothing is more frustrating than experiencing a burner that won’t turn on. While the burner itself may be in perfect working condition, you are probably dealing with a bad igniter or worn heating element. By inspecting the stove, an experienced Milwaukee stove repair technician can quickly diagnose the source of your trouble.

Food Is Not Cooking Evenly

Even if you’re the greatest cook in the world, a malfunctioning oven can make you seem like an amateur. Unevenly cooked food is one of the biggest indications of a problem. While the outside of a turkey may look done, the inside could still be raw. The culprit could be either a bad baking element or a faulty sensor.

Cracked Glass

There are plenty of benefits to having a glass stovetop, including easier cleaning and faster heating. On the downside, glass is more prone to being damaged. Because a cracked glass stovetop can cause electrical shock, it’s important to get it fixed as soon as possible.

Getting Help

Contacting an appliance repair expert is your bet when your stove does not work and you want to get reliable results. A trained repair specialist can come to your home and get your stove working at its best. We are confident our Milwaukee stove repair service will meet your needs and put a smile on your face, like these satisfied repair customers. To get started, why not pick up the phone and give us a quick call at (262) 253-2200 ?

Ask us about our repair specials. Senior Discount: Seniors ALWAYS receive $13 off any repair service.

“Old Stove” by zenmasterdod is licensed under CC BY-SA 2.0

The post A Cook’s Best Friend: Signs Your Kitchen Stove Needs Repair appeared first on Dave's Appliance Service.

The post appeared first on www.davesappliance-wi.com

The experience you have with your appliances depends on your habits. Bad habits cost you as you have to keep on hiring expensive appliance repair professionals while good habits save you thousands of dollars. Here are tips on how to properly care for your home appliances for you to save big and at the same time make the appliances last for long:

Clean the refrigerator coils

When you don’t take good care of the refrigerator, the coils get dirty, which can provoke the fridge to stop working. For you to fix the problem, reach the coils, and clean them. You can clean them by yourself or hire a professional to help you out.

Clean coils cool more efficiently, saving you a lot of money on your utility bills.

Many people have the notion that they save time and energy by stuffing as much food as possible into the refrigerator. Overloading the fridge overworks the compressor hence you have a hefty monthly bill. You also tend to weaken the fridge door by sticking too many items there.

For the fridge to last for long and function optimally, place items to capacity. Don’t load more items than the refrigerator is designed to carry.

Clean the dishwasher

A clean dishwasher not only looks great, but it also cleans better. Clean the filter installed at the bottom of the appliance. While at it, take a look at the bottom sprayer that catches large pieces of food.

Just like the refrigerator, don’t overload the dishwasher. To save energy to heat the appliance when starting, use hot water.

Wash small loads

Regardless of how large the load of clothes you need to wash, don’t stuff all of it in the appliance. Large loads lead to early death of the machine as the appliance has to overwork.

You also should avoid washing large carpets and rubber mats with the machine. Don’t wash the clothes with too much detergent as it leaves a film on the inner surfaces that promote mold growth.

Regularly inspect the washer and ensure that it’s firmly planted to the floor. If it’s not, vibrations come about which loosen the connections causing water to leak. Loose connections also lead to a noisy washing machine that isn’t fun to have.

When it comes to cleaning the washing machine, wipe and clean the inside drum with a damp piece of cloth. Do this once a week.

After washing your clothes, leave the door open. This is to let the moisture and dampness to evaporate.

Recalibrate the oven

When the oven isn’t baking as well as it’s supposed to, chances are that the temperature setting is off. Most of the appliances come with a manual that guides you on how to recalibrate the machine properly.

Carefully follow the manual, and you will have an optimally functioning machine.

It’s common for food to splatter. When it happens, scrape the food off as fast as you can. To have an easy time removing the spills, coat the large spills with salt while the mess is hot.

Don’t put metal utensils in the microwave

To avoid fire in the appliance, don’t put any metal utensils or containers in the microwave. Before putting food in the appliance remove the aluminum foil from the food. Also, remember always to remove the seal from the food containers before you put them in the oven.

When the oven is in use, don’t cover the top. It’s common for spills to happen. To avoid a rotten smell, clean the spills as soon as they happen.

Once a week, go around the appliance and wipe down the frame, door seal, and control panel using a damp piece of cloth. This is to get rid of any dirt that might be there.

Clean out the lint filter

A dirty and clogged lint filter reduces the efficiency of the appliance and at the same time puts it at the risk of being a hue fire hazard. Commercial appliance repair Fairfax professionals recommend that you clean the dryer after every cycle.

In addition to this, take time to deep clean the dryer every month in order to get rid of any lint that might have built up in other places.

The post appeared first on Express Appliance Repair

If you own a Samsung Top Load Washer and you have one or more of the following issues:

• Reports Error Code “DC” or “DC1”
• Won’t spin
• Won’t Fill
• Makes a clicking noise
• Won’t run

You may need to replace the lid lock assembly on your washer.  The following instructions outline the steps for removing and replacing the lid lock assembly on the 4.5 cu ft Samsung Top Load Washer Model #WA45M7050AW/A4.  The Lid Lock Assembly is part no. DC34-00025E. For this repair, you will need a #2 Phillips’ head screwdriver and a small prying tool like a flathead screwdriver.  And as with any repair, pay close attention to the placement of parts and steps for removing the malfunctioning part, as you will need to put everything back in place for the appliance to operate.  

1.  Always start any appliance repair by unplugging the unit from the wall outlet.  And don’t forget to turn off the water source to the washer.  

2.  Remove the console cover: 

• Access the rear of the washer
• The console cover is at the top of the washer and is held on by a few screws.  Remove these screws with your Phillips head screwdriver.  
• Use a prying tool to pry the edges of the console cover gently away from the console body.  

3.  Disconnect the lid lock assembly wire harness

• The wire harness is located on your right (facing the back of the washer) behind the noise filter. 
• Press the plastic tab on the harness, pull it apart and feed the harness towards the front of the washer.  

4.  Disconnect the top of the washer

• Remove the 2 screws holding the grey bracket on your right and left. 
• Remove the screw holding the white wire cover plate on the lower left center of the washer
• Tug gently on the wire plate and bend it gently away from the washer

5.  Lift the top of the washer

• Lift the rear of the top of the washer and move it slightly forward, so that the grey bracket attachments rest on the main body and there is a gap between the top and the body.  
• From either side of the washer, lift the front of the top, tilting the front of the top upwards so that the back “hinges” on the main body
• Prop the top of the washer in place with something so it will not fall

6.  Remove the lid lock assembly

• Feed the switch harness the rest of the way through the hole from the back, if necessary
• Disconnect the ties holding the lid switch wire in place
• Remove the two Phillips screws holding the lid switch mechanism in place 
• Remove the lid switch mechanism and wire, and set it aside

7.  Install replacement lid lock assembly

• To position, the new lid lock assembly properly, first, insert the screw that does not have a strain reliever on it and thread it by hand
• Before this first screw is tightened, finish positioning the assembly and start the second screw
• Tighten both screws

8.  Reassemble the washing machine, being certain to bend the wire plate guard back into place and replace all screws in their proper holes.  If you need assistance with this or any other appliance repair, contact us at Jerry’s Appliance Repair for timely, quality service.  

The post Samsung Top Load Washer Lid Lock Repair appeared first on Jerry's Appliance Repair.

As would be true of just about any type of appliance, if your washing machine is leaking then it is likely bad news. Not only can this damage your washing machine but it could damage your flooring and other property too. Leaks are not something to wait and solve – they are not likely to go away on their own. Check out these simple troubleshooting options and then contact American Appliance Repair at 800-640-9934 if you need the help of an experienced appliance repairperson.

Was Your Washing Machine Recently Installed?

It may seem that a brand-new washing machine leaking would be the worst-case scenario but in fact it may be a minor issue. If you just had the appliance installed, it could be that there’s nothing wrong with the machine.

Instead, a step may have been missed when it was being installed. For example, when the machine was shipped, the manufacturer put a temporary drain plug in it to protect it. This needs to be removed before using. If it is not, then leaking can occur. The fix is easy: Take out the drain hose and remove the plug.

Does the Water Have Suds?

There are different ways of handling water leaks of clear water and water leaks full of soap suds. If the leak is mostly soap suds then there is likely a different issue than just a leak. It may be something as simple as you using too much detergent, or the wrong type of detergent, and there is not enough room for it in the washer. The most common example of this is people with high-efficiency washers and dryers using regular detergent.

Is There a Loose Hose?

Check to see if all the hoses are secure. It is actually fairly common for the hoses to become disconnected while being moved. In other instances, hoses get older and begin to leak. Your fill hoses and drain hose should all be securely attached. Look to see if they are cracked or there are kinks in them. Check the connections. Is there rust or lime buildup? If so, you can bet that water has been seeping from the area and you will need additional help.

Let the Professionals Take a Look

If the basic troubleshooting options don’t work for you then it is time to contact the experts. At American Appliance Repair we are here to provide comprehensive, competitively priced, honest repairs. Call us now at 800-640-9934 to set up an appointment.

The post Troubleshooting Options for a Leaking Washing Machine appeared first on American Appliance Repair.

The dishwasher is one of the modern appliances that make life easy. Unlike most of the appliances in the market, the dishwasher is easy to maintain. According to dishwasher repair professionals, some of the proper dishwasher maintenance practices include:

Keep it level

A dishwasher should be level. If it isn’t, it could leak. For you to tell whether the unit is level, open the door and place an air-bubble level along the edges. If the dishwasher isn’t level, raise or lower either side by adjusting its “feet.” You can also add a wedge to balance it correctly.

Inspect the sprayer arms for clogs

When you go for a long time without cleaning it, food particles, mineral deposits, and other debris are bound to clog the holes in the sprayer arm. For the dishwasher to function more efficiently clean these small holes.

At least once every month, remove the sprayer arm and soak it in warm vinegar to loosen any obstruction. You should then clean out each spray hole with an awl or pipe cleaner.

Check the gaskets for cracks and other signs of damage

Gaskets are rubbers of plastic seals you find along the dishwasher door. Their purpose is to provide a water-tight seal when you close the doors.

Signs of faulty gaskets include water around the dishwasher. If the gasket is damaged, remove it by unscrewing it using a screwdriver. You can get a replacement gasket from a hardware store. You can also order one from a manufacturer.

Before you install the new gasket, soak it in hot water to make it more flexible.

Check and clean the screens and filters

Each dishwasher has a screen or filter located above the food drain. Its purpose is to catch large food and debris. For you to prevent clogs from coming about, clean it regularly.

If you have never cleaned it before, take a look at the owner’s manual for instructions on how to go about it. If you inspect the filter and it has holes, you have to replace it to avoid harming the other parts of the dishwasher.

While you are at it, also inspect and clear out any food or debris that might be trapped in the food drain.

Keep the dishwasher plugged

Plenty of accidents have been reported when dishwashers electrocute homeowners. Dishwashers have inbuilt water heaters and motors that consume a lot of electricity. The unit also uses a lot of water. If the unit isn’t properly wired, you are at more risk of being electrocuted.

For you to be safe and protect your family members from any danger, you should plug the dishwasher into a grounded outlet.

Watch out for the socket you connect it to. As a rule of thumb, ensure that it’s rated adequately to handle large loads that are required by most dishwashers.

Watch the water temperature

The temperature of the water greatly determines how efficient the dishwasher is. To improve the efficiency of the unit, reduce the amount of hot water you need to clean the dishes.

Studies show that up to 80% of the energy goes into heating the water. If the water is too cool, it doesn’t clean the dishes as well as you should. If the water is too hot, you end up wasting a lot of energy.

Set the water temperature at 130 degrees Fahrenheit. Water at this temperature will effectively remove all the food particles and residues without wasting a lot of energy. Place a thermometer inside the dishwasher. If above or below 130 degrees, adjust the hot water heater.

Use the right detergents

Not all detergents and soaps are designed for dishwashers. Wrong detergents produce large amounts of foam, suds, and bubbles that leak from the dishwasher and spill onto the floor.

For you to be safe, use detergents and soaps designed for dishwashers. Appliance repair Alexandria professionals recommend that you use powder detergents instead of gels. This is because gels contain chlorine bleach that has been shown to dissolve seals and gaskets.

Gels also don’t work well with hard water. They also clog the detergent dispenser thus impeding the cleaning performance. Gels also leave more spots and cloudiness on glassware so that it looks dirty after removal.

The post appeared first on Express Appliance Repair

If you have a dishwasher in your kitchen, you’ll need to have a garbage disposal. A garbage disposal can take care of any small food particles that are left over after you eat. Even if you don’t have a dishwasher, you might still have a disposal to make sure that you don’t wind up with a drain that’s stopped up when you’re washing dishes. Like other small appliances, issues can crop up with a garbage disposal. While you might need to replace your garbage disposal under some conditions, there are some signs that indicate a somewhat simple repair might work:

Strange Noises

A high-pitched grinding noise coming from your garbage disposal might indicate that you need to make get it repaired. Sometimes, a metal utensil can fall into the disposal. It’s usually possible to remove these and fix the problem. If there’s not a utensil evident, you’ll want to call someone to see what the problem is. In this instance, the components of your disposal could be misaligned. A professional can tell you what direction to go in if there’s a nasty grinding noise coming from your disposal. If the components of your disposal are out of alignment, a professional will likely be able to remedy the problem with a few adjustments.

Your Disposal Won’t Turn On

Sometimes, a garbage disposal simply won’t turn on. There can be a number of reasons this might happen. If it’s not a simple problem with a circuit breaker, you’ll want to contact a professional skilled at garbage disposal repair. A professional can figure out the problem and make recommendations regarding repairs or replacement when your disposal won’t turn on.

The Disposal Jams

If you put too much food into your disposal, it could jam. If you put the wrong food into the disposal, it can also jam. Potato peels are notorious for jamming garbage disposals. Additionally, a disposal with dull blades can stop up because the food particles aren’t getting chopped up correctly. If you find that your disposal is jammed, a professional might be able to fix the problem with a simple repair. This might involve removing any food that’s jamming it or replacing any dull blades that are no longer doing their job.

There’s a Nasty Odor

Rotting food has a tendency to smell over time. A disposal that’s not doing its job could start to have food settle in it. When a garbage disposal fails to do what it’s designed to do, you might start to smell an unpleasant odor coming from your sink. If you find that this is the case in your kitchen, you should contact a professional to check out whether your disposal is taking care of the food that you’re feeding it.

If your disposal fails to work as advertised, you’ll want to contact Dave’s Appliance Service to take care of any garbage disposal repair that might fix the problem. We serve Milwaukee and Southeast Wisconsin, and we’d love to help you get your garbage disposal in working order. The sooner you get your disposal fixed, the sooner your sink and dishwasher will operate as designed. Call (262) 253-2200 today.

Ask us about our repair specials. Senior Discount: Seniors ALWAYS receive $13 off any repair service.

Photo by bradleypjohnson from Flickr using Creative Commons license.

The post 4 Signs Your Garbage Disposal Needs Repair appeared first on Dave's Appliance Service.

Do you own a black, white or stainless steel Frigidaire or Kenmore brand electric wall oven?  Some of these ovens are a part of a recall issued by the manufacturer, Electrolux, because they can pose a fire hazard to consumers. 

Read below for more information on the recall.  

Recall Information

On July 26, 2016, the manufacturer Electrolux issued a recall with the U.S. Consumer Product Safety Commission (CPSC) for approximately 1,000 electric wall ovens branded Kenmore or Frigidaire. The recall covers both single and double ovens.  The brand name on these ovens is printed below the oven window. The ovens were originally sold in March and April 2016.  The Frigidaire models retailed in Illinois and the Kenmore models were sold at Sears stores nationwide.  

The model and serial numbers on these ovens can be found inside the oven on the left side.  Specific information about which serial numbers and models are covered by the recall and detailed information about the recall itself can be found at this CPSC link. There is a fire hazard with these ovens due to the improper manufacturing of the thermal switch.  The recall recommends that you stop using these ovens immediately.  

What You Can Do

If you need assistance with this or any appliance you can contact us. With all product recalls we recommend getting in touch directly with the brand and/or manufacturer first.  With this recall, a free inspection and repair on Kenmore ovens are available by contacting Sears at 800-659-7026 Monday through Friday from 7 am-9 pm CT or on Saturday from 7 am-8 pm CT.  If you own a Frigidaire model covered by this recall you can get in touch with Electrolux directly by calling 888-360-8556 from 8 am-8pm ET Monday through Saturday, or by emailing Frigidaire.

Jerry’s Appliance Repair is authorized to service Electrolux ovens both in and out of warranty.  We have completed over 200,000 service calls in Indiana in the past 24 years.  We’ve recently expanded our service area to include Kentucky.  We offer quality, efficient service to meet your home appliance repair needs.  

The post Kenmore and Frigidaire Wall Ovens Recalled appeared first on Jerry's Appliance Repair.

It’s a fact that the washing machine saves you time and effort. For you to keep it functioning optimally for long you need to take good care of it. Washer repair experts recommend that you clean it regularly to not only leave it looking great, but also to keep off awful smell and bacteria. For you to properly clean the unit you need to:

Wash the washing machine filter

It’s in the filter where gunk is collected after every cycle. Small items such as coins and buttons end up in the filter. With time, if you don’t clean it, dirt might buildup worsening the performance of the machine.

To clean the filter you need to begin with locating it. For the front load washing machines, the filter is located at the bottom, usually in the right corner. Remove it taking care that you don’t break it.

After removing it, use a paper towel to remove any lint that might have built up. Remove as much lint as you can using a paper towel. If the paper towel isn’t doing a good job, scrub off what is remaining using a toothbrush or sponge.

Pay attention to the screen that gathers all the gunk. Remove it and soak it in hot water to get out any dirt that might have stuck to it.

Once the filter is clean, take a look inside the unit before you put it back. Using a paper towel, trace the sides of the opening. You can also use an old toothbrush to get rid of all the dirt that might be on the inside.

To have an easy time, clean the air filter once every 3-4 months.

Get rid of the smell from the washing machine

If you have had your washing machine for a long time you must have been in a situation where you open the washing machine door and a pungent smell hits your nose. You don’t need to throw away your washing when it’s making the awful smells.

The first place you should look is the drawer. Take out the drawer then scrub it properly. You can use your hand or sponge. Once you are done with the cleaning, let it dry and put it back. For you to kill all the mold, use a mixture of baking soda and water.

You can also use a mixture of soda and vinegar. The mixture causes a reaction that eats away the mold or lint. Once the cleaning cycle has ended, you are left with a clean and fresh smelling machine. If you run a cycle with the mixture and still the machine doesn’t have a fresh smell, repeat the cycle.

It’s common for dirt and grime to hide in the crevasses of the seal. Mould also tends to grow there as the area holds moisture for a long time. To clean the seal, use a damp piece of cloth then run your fingers along the rubber to clean it. If you can remove the seal, do so and wash it under the water.

Pay attention to the outside of the washing machine

Cleaning the insides of the machine isn’t enough—you also need to clean the outside. It’s common for the washing machine to get dusty and start looking old and yellowish. To maintain the shine, use a dry clean cloth or rug.

Go over the entire exterior rubbing all the necessary areas. Get rid of the fingerprints and dried up marks that might be there.

Once you are done with the exterior, pay close attention to the windows. Start with going over the window with a dry rack to get rid of the excessive dust. You should then use your favorite mirror or glass detergent and spray it onto the glass. Once you are done, wipe the surface with a dry piece of cloth or paper towel. For ideal results, wipe in circular motions.

Cleaning products matter

For your washing machine to continue functioning optimally you need to keep it clean. Appliance repair Springfield professionals report that you should be cautious of the cleaning products you use. For ideal results, use high-quality detergents. If possible, go for eco-friendly detergents. While they will be a little bit expensive, they will give you perfect results.

The post appeared first on Express Appliance Repair

Many kitchen conversations revolve around a question that’s nearly as old as time-saving appliances: Just how clean should the dishes be when they go into the dishwasher?

Some insist that a quick pre-scraping will do, while others argue that the dishes must make contact with soap, water and a healthy dose of elbow grease before beginning their automated bath. Still, others come down somewhere in the middle.

The Importance of Dishwasher Detergents

Didn’t clean your plate at dinner? Believe it or not, some varieties of dishwasher detergents contain enzymes — amylase and protease — that help finish off your food. These enzymes digest proteins and starches by breaking them down into smaller pieces, much as your stomach enzymes begin the digestion process in your body.

After your enzyme-containing dishwasher detergent starts the breakdown process, your dishwasher rinses away the remaining debris, and your dishes emerge sparkling clean. Not all dishwasher detergents contain enzymes, and you’ll find that the variety of soap you choose plays a significant role in the performance of your dishwasher.

If your dishwasher doesn’t seem to be doing the job well enough, you may want to take a look at the type of detergent you’re using. Standard detergents will remove grime and oil well enough, and varieties with added bleach will remove most stains. Meanwhile, rinse aids can help avoid the white residue that hard water leaves on glassware.

Older detergents used phosphates, which cleaned well but increased the risk of environmental damage. Research has found that newer varieties with enzymes clean just as well, and the enzymes break themselves down quickly without harming the environment.

To Pre-Rinse — or not to Pre-Rinse?

Manufacturers of enzyme-containing dishwasher detergents discourage rinsing or pre-washing dishes; doing so can actually make the detergent less effective. Instead, give dishes a quick scrape, load them into the dishwasher, and let the enzymes get to work.

Still have questions or concerns about your dishwasher? Contact Sarah’s Appliance Repair today at 505-835-1927, and we’ll be happy to assist you.

The post Should You Rinse All the Food off Before Putting Your Dishes in the Dishwasher? appeared first on Appliance Repair New Mexico.