Springtime is an excellent time to clean your whole home. With fresh air blowing through your windows, you have an excellent opportunity to get rid of odors, dust and dirt that may have built up on your rugs, upholstery, hardwood floors and furniture. In addition, be sure to take your cleaning to the next level by including your home appliances on your spring cleaning checklist.

Cleaning Your Dishwasher

Your dishwasher is probably filled with bits of food as well as hard water deposits from frequent use. Thoroughly clean the screens and filters on the bottom of the dishwasher and also wipe down the sprayer arms. You may even want to use a shop vac to get rid of food debris. For very difficult-to-remove lime or calcium deposits, consider cleaning with a commercial cleanser, such as CLR or Lime-Away.

Cleaning Your Refrigerator

Little spills of food and drink in your refrigerator can add up to one huge mess by the springtime. Wipe down all of the shelves with a warm, wet microfiber cloth, and clean around the door seal as well. Be sure to pull your refrigerator out to clean the coils on the back. If your refrigerator has not been effectively cooling your food lately, be sure to schedule refrigerator repair . This is also the perfect time to change your refrigerator’s water filter.

Cleaning Your Oven

Most modern ovens come with self-cleaning options that make spring cleaning super simple. Once the cycle is complete and the oven has cooled, simply wipe out the ashes. Be sure to clean your stove top as well as around all of the knobs. If you have a glass-top stove, gentle cleansing products will be your best friends. However, if you have a traditional electric or glass stovetop, you will need to remove the burners and scour around them.

Cleaning Your Washing Machine

With a name like “washing machine,” you might think that this appliance needs little help from you to stay clean all year long. However, the gasket and drum can become quite dirty and filled with gunk especially if you have hard water. Use white vinegar in place of your regular detergent on an empty load cycle. Then wipe around the gasket and door seals with a cloth soaked in white vinegar. Also see this helpful tip: How to Remove Mildew Odor from your Front Load Washer. If you are having persistent problems with your washing machine not getting your clothes as clean as it once did, you may need appliance repair in Menomonee Falls.

Cleaning Your Clothes Dryer

While the inside of your dryer should stay relatively clean, the dryer’s vent may not be so spic and span. Take out the removable vent in your dryer and vacuum it and around it as well as possible. You should also clean the long dryer hose that vents outside to get rid of lint that could eventually become a fire hazard.

While spring is a great time to clean your home’s appliances, it is also a key time for you to take note of any issues that you may be having with them.

Image from PIXNIO

The post Add Your Home Appliances to Your Spring Cleaning Checklist appeared first on Dave’s Appliance Service.

Refrigerators had made life so much easier than it was back when they did not exist, and today it is the most essential and used appliance in our life. While everything beneficial comes with its problems, refrigerators have similar difficulties to deal with besides its sound effects.

With a refrigerator not working correctly, it may lead to all the stored food to spoil and waste. Most of the times, to recover from such problems refrigerator repair near me are quite useful.

But if you can deal with them at home and get your problems solved in minutes by yourself, the job gets much more comfortable. So it is always better to be acquainted with some handy skills while dealing with a refrigerator.

Common problems:

1. Continuous water leakage
2. Strange noises from the refrigerator
3. Temperature not cold enough
4. Freezing of food at the bottom part
5. Ice building up inside the fridge

Most of these problems occur due to carelessness while handling the fridge and can be prevented with adequate care. A few tips can always come in handy while repairing your refrigerator at home.

Solving your refrigerator problems:

1. Continuous water leakage:

A refrigerator leaks water when the water supply line freezes and splashes water continuously. It can also leak when the drain hose gets clogged with food particles, vegetable leaves, and other litters and scraps.

The clogged hose leads to a blocked defrost drain eventually causing water dribbling from the drain. In such a case, the problem can be fixed by using a tub of warm water to clear the blocked drain within a few minutes interval.

The hose can be cleared with a bent hanger or anything with a bent end slowly removing the litter with a few attempts.

A defect in the water supply line or a shut-off-valve at its open state can also cause water leakage. To get rid of this problem, the valve behind the panel of the refrigerator should be closed clearing the blockage and checked for any wear and tear. The water supply line should be tested and fixed according to the problem faced.

2. Strange noises from the refrigerator:

The refrigerator makes high pitched noises when the condenser motor fan stops working due to blockage. The fan gets blocked due to litter accumulating in the propeller blades and every time it rotates, the clicking sound produced is due to the litter.

This problem can be solved by unplugging the refrigerator at first and then brushing the blades with warm water and bicarbonate solutions. The freezer may also create sounds when the distance between it and the wall is narrow. This may lead to vibration and can be solved by displacing it from a space an inch away from the wall.

3. Temperature not cold enough:

The condenser fan is clogged with litter also plays a role in inadequate cooling of the refrigerator. If the condenser fan is blocked by debris, the rotation is slow, and enough frosting does not occur.

Clogged coils inside can also add to the raised temperature inside and result in inadequate cooling. To solve this problem, remove the evaporator cabinet and replace the fan. The compressor should start running after the replacement and will start frosting again.

A brush can be used to clean the condenser coils after unplugging the refrigerator from the source. The thermostat readings should be checked if the problem lies underneath it as well.

4. Freezing of food at the bottom part:

The bottom portion is not designed to be frosted at a freezing point in a refrigerator. So freezing of food at the bottom part is counted as an abnormal phenomenon. This can happen due to a wide range of reasons.

Firstly, the food may be insufficient compared to the surface area required to be occupied and the air to reach the food. Due to inadequate food compared to the amount of air inside, the food tends to freeze.

The food can also freeze inside if the temperature regulating points are not set correctly. Too much low-temperature setting points can cause food to freeze inside the bottom part.

The problem can be solved by setting the regulatory points to an optimum temperature, storing ample food compared to the surface area, avoiding the bottom part for negligible food, etc.

5. Ice building up inside the refrigerator:

A sudden frost inside the freezing compartment of the fridge is a matter of concern and needs attention to be solved as soon as possible. Inaccurate sealing of the fridge, and keeping the door open for too long add to the problem of ice building up inside the chambers.

Loose door pivots and careless closure of doors let the external air accumulate inside and cause the building of excessive ice. Defective door seals also let air pass through and cause building up of ice.

Ice buildup can lead to clogging inside the chambers and imbalance in humidity to be maintained inside. The proper preventive measure is to always tighten the door seals and check for proper closures.

It can be solved by unclogging the apertures, unplugging the refrigerator and introducing warm water to get rid of the excess buildup of ice pouring out.

Attention should be given so that distance is maintained between the wall and the fridge so that it gets enough space to release the excess air. Plug the refrigerator again and check the compressor to ensure proper cooling after the changes.

Conclusion:

Wrapping it up, it can be concluded that a refrigerator may face a wide range of problems if used incorrectly and carelessly. Inadequate cooling or frosting is always a matter of concern in this kind of appliance and can lead to severe damage to it.
Proper measures and useful tips should always be followed to take care of your refrigerator by yourself. Tricky tips can work smoothly and help you benefit from them without the help of repairing services and technicians. Thus, following some do’s and don’ts can help you fix your refrigerator in a short period effectively.

Note: Image Source  cnet.com/reviews/lg-lsxc22436s-side-by-side-counter-depth-refrigerator-review/

The post Top 5 Refrigerator Problems and Solutions appeared first on Appliance Masters Repair Service.

Dryers are one of the most essential and necessary appliances in the present everyday life because they are super useful in saving our time and doing a part of our daily chores, saving us in emergencies and saving our tireless efforts.

Not only are they useful in providing us with adequate scope to get our clothes dry in a limited period and a fast rate, but they also make our lives easier by doing their functions in times of necessity.

Although they are effective, they exhibit some difficult problems have created a nuisance. A few tips can always help solve these difficulties.

Problems commonly faced:

1. The dryer fails to start
2. The dryer makes strange sounds
3. The dryer does not heat
4. The dryer gets slow
5. The dryer gets too hot

Although the problems sound difficult and are incredibly annoying, they can be handled pretty quickly if the correct techniques are followed. Dryer repair near me are quite handy and available almost everywhere nowadays, but it always feels better to solve such problems at home yourself.

How to solve dryer problems:

1.The dryer fails to start

This is the most common problem faced while handling a dryer. No matter how many times you try to start it and push the switch again and again, the dryer fails to start. In such cases, always check the control settings and make sure everything is in the proper place.

If that is not the case, the problem might lie in your electricity connection. Ensure if the electricity is reaching your appliance and if the link is adequate.In most cases, a circuit breaker seems to slip, and the dryer fails to activate, and the problems can be solved by resetting the circuit breaker. If it persists, there might be an issue related to the circuit outlet which might need the help of the electrician.

The problems might also be related to the door switch and thermostats and will eventually require replacement with screwdrivers and pliers if you are comfortable dealing with them.

Most of the reasons the dryer fails to start lies within the electricity issues or mishandling through pressing the wrong system buttons and can be solved with proper handling.

2. The dryer makes strange sounds:

Often dryers are observed to make high pitched noises, and squeaking sounds without any reason while operating them which is scary at most times out of a sudden.

These noises indicate signs of abrasion and need immediate attention. Dryers contain a belt around the drum, and these belts may undergo loosening or scraping off and lead to abnormal sounds out of the dryer.

This can be solved by opening the cabinet and pulling the worn out belt off and replacing them with a new one. The sounds may also result from drum supports of the dryer called glides which seem to wear out evenly and cause friction with the inner wall and cause shrill sounds.

It should be replaced as soon as possible before damage may occur to the interior of the dryer. Anything metallic getting trapped inside the dryer may also result in jammed noises and can be a source of a nuisance so it must be brought into attention as soon as possible.

3. The dryer does not heat:

A dryer may fail to heat because it might get blocked due to impaired airflow inside, it might get clogged in the filter, and it might face a problem of the safety devices to function correctly.

Most of the time the dryer does not receive adequate air flow due to a blocked aperture and air cannot enter in sufficient amount leading to heat failure. In other cases, a clogged filter or non-functioning burner flame can cause the dryer to fail to heat.

In such cases, the problem can be solved by replacing the gas burner, cleaning the filter properly and clearing the aperture well. Defective electric coils and false readings in the thermostat indicate the heating ability of the dryer to be diminished.

These problems can be solved by checking the readings of the thermostat behind the dryer whether it is at zero or not.

If it is at zero, replace the thermostat by pressing the probes, and it will solve the problem. Removing the defective coils and replacing them is also an easy task and can be done manually.

4. The dryer gets slow:

A dryer may indicate slow functioning when it takes time longer than usual to dry clothes. A clogged filter and blocked aperture can lead to this problem when the dryer has not been adequately cleaned in a long time.

The best way to deal with this is to clean the filter once a month or within a few weeks to get it going smoothly.

Adequate air flow should be allowed to pass through the aperture to let the dryer to run at its optimum speed. The slow pace of the dryer can result in inadequate heating of the clothes, and the garments may appear wrinkled as well.

5. The dryer gets too hot:

A dryer may get hot when the internal conditions are extremely unfavorable, and the consequences can be pretty damaging if proper precautions are not taken and attention is not given. Accidents may also occur due to mishandling of the dryer during such times.

A dryer may get hot due to the accumulation of excess lint inside the aperture and cause humidity to be trapped inside. Excess heat can build up inside due to impaired thermostat operation and defects in the gas burner flame.

Poisonous carbon monoxide can also get accumulated inside during such conditions and cause overheating. To prevent such problems, the first and foremost priority should be to turn the switch off and let the dryer cool down first to avoid any accidents.

After the dryer has cooled down, carefully remove the filter and clean the lint trapped inside. The thermostat should be replaced if worn out, and the burner flame should be checked.

Final Verdict

Summing it up, it can be said that a dryer faces some difficulties due to irregular cleaning up and impaired functioning of the parts. Such problems may lead to hampering of the regular activities while using a dryer. In such a case, ample skills can help in the long run and solve the problems.

The post Top 5 Dryer Problems and Solutions appeared first on Appliance Masters Repair Service.

Microwave ovens have been sold since 1946. Then known as the Radarange, the technology advanced and more affordable and compact microwave ovens began to become popular for home and commercial use in the late 1970s. Some have questioned the dangers of using microwaves, similar to x-rays, in the home and early pacemakers were susceptible to malfunction when in close proximity to an operating microwave. As well, water may erupt out of a cup when it is overheated in a microwave, but it is generally accepted that a microwave, in good repair and operated in accordance with the operating instructions, is a safe and convenient addition to any kitchen.

Keeping Your Family Safe

The United States’ Occupational Safe and Health Administration cites a report from its Canadian counterpart that provides information on the safe operation of microwave ovens, which includes:

• Following the manufacturer’s instructions for use
• Check the door seal for wear
• Inspect the area where the door closes for damage, such as dents, that might prevent proper closure
• Never disable any safety locks
• Repair or replace any microwave oven that is not in good condition
• Repairs should only be made by qualified service professionals

So, the key to the safe use of a microwave oven is to maintain it in good working order. Even dirt that may accumulate in a door seal may allow radiation to escape a microwave when it is operating, just as if the seal was not working properly due to wear and tear. Notably, microwave ovens are not an appliance that should be maintained by non-professionals

An Ounce of Prevention…

Regular cleaning and maintenance, as discussed above, is key to the safe operation of all microwaves. Removing dirt and grease before it accumulates is crucial to maintaining safe operating conditions, and should be done on a regular basis. Inspection of the door seal and ensuring that the door closes properly is another important element to the safe use of a microwave oven.

Leave It to the Professionals

While simple cleaning can obviously be done by the owner, repairs of any sort to a microwave’s seals, door, sensors or any other internal part must be done by a trained professional. This is one appliance that is not an option to troubleshoot by yourself. If your microwave is making more noise than normal, is not heating up or in any way is not operating as it should, you should look to have it examined by an appliance repair service.

Who to Trust?

Appliance Masters has trained technicians who have the skill and experience to safely and competently repair your microwave, at an affordable cost. We work on all makes and models, and will work to find the best option to maintain your investment and extend its life while being sure that it is operating safely. If your microwave oven is not working properly, or if you just want to be sure that it is safe to operate, call us for peace of mind and know that your satisfaction is guaranteed

The post Danger in the Kitchen? appeared first on Appliance Masters Repair Service.

Modern laundry machines include features that were unheard of only a few years ago. These new abilities save energy (HE: High Efficiency), use less water and energy and provide convenient options for you to control them remotely. These wonderful additions improve these appliances, of course, but also complicate matters when they are installed or when a repair is required. So, if your new washer or dryer needs to be repaired, and you are asking yourself, “Where is a washer and dryer repair service near me?”, there are some items to consider in making your choice.

What Does HE Mean for Me?

HE washers and dryers are designed to save their owners money by using less water and energy to operate than traditional appliances. They use sensors to determine how long clothes need to be dried and can add detergent and other laundry additives automatically during the cleaning process to maximize their efficiency. Dual tub machines are now available that can be used for delicate loads or clothes that need extra cleaning and you can even control them via digital personal assistants or voice control. These functions combine to make appliances that perform better than their ancestors and offer many conveniences that were never available previously.

Sophistication Can Mean Complication!

These additional features are state-of-the-art, and the repair service that you call needs the knowledge and technical ability to repair the specialized sensors, computer components and machinery that are now standard in these appliances. Repairing or installing these sophisticated appliances is not a job for a rookie, and you need to call someone who has the skills and expertise to do the job right. Protect your investment and have an expert provide service and installation for your HE washers and dryers and relax in the comfort of your high-tech laundry appliances!

The post HE Washer and Dryer Installation and Repair appeared first on Appliance Masters Repair Service.

Locally Owned and Operated: Appliance Masters

Over the last sixteen years that Appliance Masters has been in business, we have watched appliances become more technologically advanced, and we have continued to train and educate our technicians to stay current. However, no matter how many computer chips a refrigerator may have, it is still supposed to keep your food cold, and when it doesn’t, you need someone to fix it. Appliance Masters has the training and experience to fix all types of appliances, old and new, and we want to have the opportunity to earn your trust, as we have been earning trust for the last sixteen years.

Hometown Company

We are a local, independently owned company and establish our own standards and policies. We can take care of our customers more effectively than large, corporate chains because we have built our business on customer satisfaction, honesty and value for our customers.

We have helped thousands of families in and around Huntsville, Alabama with their appliance repair needs. Whenever our technicians have gone to someone’s home to make a repair, they have understood how important it was to that family. Every time we made sure that the customer was satisfied with our work before we left.

Honest Work at an Honest Price 

We are committed to providing the highest quality service at affordable prices. We don’t try to maximize the profit on every repair, we work to build trust and gain long-term, repeat customers who will tell their friends and family about Appliance Masters. We do this by finding the most affordable option in every situation and providing quality work.Our success has been built on this philosophy.This is why we decided to start our own business sixteen years ago, and this is how we will continue to operate.

248 total views, no views today

The post Huntsville, Alabama’s Best Appliance Repair appeared first on Appliance Masters Repair Service.

Taking care of all of your household appliances will ensure they last their entire life expectancy.

Appliances have become such a part of our day-to-day life, that we find ourselves taking advantage of them. When they break down or stop working, we realize how much we use and need them. Thankfully, there are tasks we can do to ensure our appliances stay maintained and working, using up their full life expectancy.

Here are some care tips for a few of the major appliances found in your home:

Refrigerator

• The best place to start with taking better care of your refrigerator is the condenser coils. When your refrigerator’s condenser coils become dusty, they work less efficiently, resulting in wasted energy being used to try to keep the refrigerator’s temperature cool. Condenser coils should be cleaned every six months by brushing and vacuuming up debris.
• It would also be a good idea to the clean the refrigerator’s doors gaskets to keep warm temperature out and to help the refrigerator not work as hard.

Washing Machine

• A washing machine is similar to a dryer in the sense that they both have filters.traps. Like dryers, a washing machine filter (some are not accessible) should also be cleaned regularly. Cleaning the filter will keep your clothes free of lint and will extend your washing machine’s life.
• Checking your washing machines hoses would also help keep your machine maintained and working properly.

Dryer

• The first thing you will want to do to take better care of your dryer is to clean the lint filter every time you put in a load. About ⅓ of dryer-related fires are caused by lint filters that are dirty and full. Removing the lint every time you run your dryer will keep it maintained and safe.
• You will also want to have the dryer vent tubes professionally inspected and cleaned at least once a year.

At Sarah’s Appliance Repair, we can come inspect and fix any and all appliances you may have. We can come to ensure you are taking the best care of your appliances and make sure they’re in the best shape. Call us today to schedule an appointment if you have a broken appliance or need a maintenance check.

The post How to Take Better Care of Your Appliances appeared first on Appliance Repair New Mexico.

Here are the 5 most common oven problems you need to look out for.

Whether you’re cooking dinner for a small family or for a party of 20,  oven problems can bring the evening to a screeching halt. If you want to keep your oven working smoothly for years to come, here are the 5 most common oven problems you’ll need to look out for and how to fix them:

• Incorrect oven temperature
• Doesn’t turn on
• The door won’t open
• Self-clean doesn’t work
• The light doesn’t work

Incorrect oven temperature

A preheated oven should maintain the temperature that it’s set too. If your food is consistently coming out undercooked or the temperature always reads higher than you’ve set it to, you may need to have the temperature controls re-calibrate If your model allows. Some of the entry-level models will have higher fluctuation then some of the high-end models.

The oven doesn’t turn on

If your oven isn’t turning on, check the circuit breakers and then make sure the oven is plugged in. If it is receiving power, there could be a broken wire, bad control element, or wrong amount of power coming to the unit. If this case, it would be a good idea to turn the power to the oven off at the breaker and call a professional. Because the problem is electrical and could be internal or external, you shouldn’t turn it into a DIY project which could result in an injury or damage to property.

The oven door won’t open

If your oven door does not open after a self-clean cycle, try unplugging it for at least 5-minutes and carefully move the door lock lever. If that doesn’t work, reset the self-clean cycle and wait for 15-minutes, then cancel it and try moving the door lock lever once the oven has cooled off. If the door still won’t open give Sarah’s Appliance Repair a call.

The self-clean feature doesn’t work

If the self-clean cycle isn’t working, it’s typically because the door switch isn’t locking properly. If that’s not the case, your oven may need to be tested and inspected by a repair professional.

The internal oven light doesn’t turn on

If your oven light isn’t working and you’ve already replaced the bulb, there could be a chance of a faulty light switch, electronic control, or wire connection. In this matter, you may want to hire a professional due to the risk of electric shock or greater damage to the unit.

Sarah’s Appliance Repair has years of experience fixing appliances, like your broken or malfunctioning oven. If you are having issues with your oven, call us today and we will get your oven back to working like new. However, if you would like to fix it yourself and just need replacement parts, we can get them to you quickly, so call today!

The post The 5 Most Common Oven Problems appeared first on Appliance Repair New Mexico.

Keep your household appliances energy efficient with these helpful tips.

Energy Star certified appliances come with several great benefits such as discounts, rebates and a much lower energy bills. Taking full advantage of those benefits and saving as much money as possible, however, involves professional annual inspections and cleanings.

Here are tips to ensure you are getting the most out of your energy efficient appliances.

Refrigerators:

• Regulate the inside temperature by keeping your fridge stocked but not filling it to its maximum capacity causing it to restrict the airflow.
• Clean door seals and replace them when they break.
• Once a year, clean the condenser coils to keep the airflow passages free of dust and debris.

Ovens:

• Wipe up spills as soon as the oven has cooled down.
• Like the fridge, keep the door seal clean and replace it when it breaks.
• Cooking frozen foods works the oven longer and uses a lot of energy so instead, try to cook fresh or thawed foods in the oven.

Dishwashers:

• Only start your dishwasher once it is completely full of dishes.
• Clean the filters regularly to remove any debris.

Washers:

• Decrease the number of cycles by washing “Large” loads
• Avoid “Extra Large” loads, they can become overfull and spill water over the top as well as put unnecessary strain on the motor and internal components.
• Wash you loads of laundry with cold water rather than warm or hot.

Dryers:

• Get your dryer cabinet and exhaust vent cleaned once a year by a professional or by yourself.
• Keep lint filters free of lint, cleaning every time you put in a load of laundry.
• If your lint filter is clogged by a translucent film (caused by dryer sheets) wash it by hand with a mild dish soap and scrub brush.

Water Heaters:

• Drain sediment from your tank every six months.
• Water heater’s temperature should be set at 120° which is high enough for your needs and high enough to reduce mineral buildup.

Taking good care of your Energy Star certified appliances and getting them annually inspected will save you money each year. Contact Sarah’s Appliance Repair to schedule your professional inspection which will ensure your appliances are in great working condition, saving you money in the long run.

The post Tips to Save Money and Energy appeared first on Appliance Repair New Mexico.

New Home? Get Your Dryer Vents Cleaned

The leading causes of home fires can be prevented by having your dryer vents cleaned

Modern lint filters do a good job of catching debris from your clothes, but even when they’re cleaned regularly, they don’t catch everything. Lint can build up slowly inside your dryer, in the ventilation hose and even inside your wall!

A clog at any point in this chain can cause your dryer to overheat, and the three things needed for a fire to start are heat, oxygen, and fuel (lint).

How do you know if your dryer vent system is clogged? Here are the symptoms to watch for:

1. Drying time takes longer and longer.
2. The outside of the dryer is hot.
3. There is a burning smell.
4. The vent hood flap does not open correctly.
5. It’s been longer than a year since the vents have been checked.

Before moving into a home, it is very important to ask when the dryer vents were last checked and cleaned. If it has been longer than a year, you may want to call Sarah’s Appliance Repair to come out and get them back into tip-top shape.

Prevent a fire in your home and call Sarah’s Appliance Repair today.

The post Get Your Dryer Vents Cleaned appeared first on Appliance Repair New Mexico.